基于1.5维谱的船舶轴频电场信号实时检测

为有效地从海洋环境电场中检测出船舶轴频电场信号,在采用正态概率图法分析海洋环境电场高斯性的基础上,利用1.5维谱在抑制高斯噪声和加强谐波信号基频分量等方面的优势,提取特征频段(1～7Hz)范围内的1.5维谱的平均值为特征值,利用滑动检测方法对信号进行了实时检测,并通过实测数据对该检测算法进行验证。结果表明:该方法在信噪比较高和较低的情况下均能较好地实时检测到目标信号,并且在没有目标信号的情况下不会出现虚警。     

舰船水下静态电场深度换算的格林函数法

为从有限深度、有限范围内的舰船水下静态电场数据获知实际舰船更大深度上的场分布特征,在对深海环境中舰船静态电场满足的拉普拉斯方程进行求解的基础上,提出静态电场深度换算的格林函数法,推导出了换算公式的边界积分表达式,给出了实际应用中换算公式的近似计算方法。以舰船静态电场的基本模拟体——单个水平电偶极子的场为例,采用数值仿真的方法对换算公式进行了验证,并对近似计算方法进行了讨论。研究结果表明:该方法可直接通过对测量平面上离散场量进行二重求和来实现静态电场的各类深度换算;与文献中已有的换算方法相比,其换算过程更为快捷。     

一种改进的遥感图像分形维数提取算法

基于离散分形布朗随机场的图像分数维提取方法,在综合分析和实验验证的基础上,提出了一种改进的图像分形维数计算方法。仿真实验证明,该算法相较于原算法计算结果稳定,不同地物的区分能力强,能够应用于遥感图像的地物分类。     

A misclassification cost‐minimizing evolutionary–neural classification approach

Machine learning algorithms that incorporate misclassification costs have recently received considerable attention. In this paper, we use the principles of evolution to develop and test an evolutionary/genetic algorithm (GA)‐based neural approach that incorporates asymmetric Type I and Type II error costs. Using simulated, real‐world medical and financial data sets, we compare the results of the proposed approach with other statistical, mathematical, and machine learning approaches, which include statistical linear discriminant analysis, back‐propagation artificial neural network, integrated cost preference‐based linear mathematical programming‐based minimize squared deviations, linear integrated cost preference‐based GA, decision trees (C 5.0, and CART), and inexpensive classification with expensive tests algorithm. Our results indicate that the proposed approach incorporating asymmetric error costs results in equal or lower holdout sample misclassification cost when compared with the other statistical, mathematical, and machine learning misclassification cost‐minimizing approaches. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

一种定征层状平面结构界面粘接强度的兰姆波方法

置于层状平面结构表面的斜劈超声换能器被用于激发和接收多模兰姆波。文章首先分析了采用多模兰姆波的幅频特性定征界面粘接强度的可行性。基于Ritec-SNAP 超声测量系统,建立了采用兰姆波方法定征层状结构界面粘接强度的实验系统。对于给定的层状平面结构,将粘接层的固化过程用于模拟粘接层界面强度的变化过程。对于不同的粘接层固化时间,实验测得的多模兰姆波幅频曲线明显不同。借助于声——超声技术中的应力波因子,给出了兰姆波应力波因子的定义。实验结果显示,兰姆波应力波因子与间接表示界面粘接强度的固化时间之间存在确定的单调对应关系,表明将多模兰姆波的应力波因子用于定征层状平面结构的界面粘接强度是可行的。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Adaptive phasefield modelling of crack propagation in orthotropic functionally graded materials

In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive mesh refinement. The proposed approach is capable of capturing the fracture process with a localized mesh refinement that provides notable gains in computational efficiency. The implementation is validated against experimental data and other nu-merical experiments on orthotropic materials with different material orientations. The results reveal an increase in the stiffness and the maximum force with increasing material orientation angle. The study is then extended to the analysis of orthotropic FGMs. It is observed that, if the gradation in fracture properties is neglected, the material gradient plays a secondary role, with the fracture behaviour being dominated by the orthotropy of the material. However, when the toughness increases along the crack propagation path, a substantial gain in fracture resistance is observed.     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

深水环境下潜艇舯部结构撞击强度数值分析

潜艇结构水下碰撞是潜艇的主要事故形式,也是船舶碰撞最为危险的状态之一。文中首先提出潜艇碰撞问题,对碰撞特征进行分析,然后针对某型潜艇舯部典型结构的撞击极限强度特性进行数值计算,结果显示,由于准静压载荷的附连耦合作用,随着静水压力的增加,潜艇舯部耐压壳体结构的防撞能力将大幅下降,而耐压壳体内部平台和舱壁结构将有效提高壳体结构的横向失稳临界应力,改善潜艇结构的径向耐撞能力。     

火灾场钢筋混凝土简支梁抗弯性能分析

通过对火灾中钢筋混凝土简支梁截面温度场和材料热力学性能分析,将混凝土分为弹性区和塑性区来分别计算其强度,建立了火灾场简支梁截面内混凝土应力和梁极限抗弯承载力的计算公式,通过具体算例分析了钢筋混凝土简支梁截面温度场和极限承载力的变化规律和原因。