Strain concentration caused by the closed end contributes to cartridge case failure at the bottom

Ruptures at the bottom of cartridges are a common cause of failure of ammunitions, which directly threatens the safety of weapons and shooters. Based on plastic tube theory, this study analyses the radial and axial deformation of a cartridge, considering the radial constraint of the closed end at the bottom of the cartridge. Owing to the influence of the closed end, the bottom of a cartridge does not establish complete contact with the chamber. Owing to strain concentration in the non-contact area, this area is more amenable to the occurrence of cartridge rupture. This theory predicts the location of the fracture more accurately than the traditional theory. The maximum axial deformation of a cartridge comprises bending and friction deformation. The maximum strain at the bottom of the cartridge increased by 135% owing to the introduction of bending strain caused by the closed end. The strain distribution of a cartridge was measured using digital image correlation technology, and the measured result was consistent with the predicted results of the bending deformation theory and rupture case. The effects of wall thickness, radial clearance, friction coefficient, and axial clearance on the axial deformation of the cylinder were studied. Increasing the wall thickness and reducing radial clearance were found to reduce bending deformation; furthermore, lubrication and reduction in axial clearance reduce frictional deformation, which in turn reduce cartridge rupture.     

Numerical simulation of dynamic large deformation and fracture damage for solid armature in electromagnetic railgun

The design of solid armature of railgun should take full account of its operating conditions and material properties because the armature is subjected to dynamic loading conditions and experiences a complicated electrical, thermal and mechanical process in the interior ballistic cycle. In this paper present, we first introduced a multi-physical field model of railgun, followed by several examples to investigate the launching process. Especially, we used the explicit finite element method, in which material nonlinearity and geometric nonlinearity were accounted, to investigate the deform behaviors of solid armature. The results show that the dynamic mechanical process of armature is dependent on the armature geometry, material and exciting electric current. By the numerical simulation, the understanding of the fracture mechanism of solid armature was deepened.     

关于有限变形非弹性有限单元法的研究进展

对有限变形非弹性有限单元法研究发展中的一些普遍关注的研究课题,进行了回顾和展望。这些课题包括:不同参考构形下的有限元列式、客观性应力率的合理定义、有限变形非弹性本构方程的精确描述、率本构方程的增量客观数值积分、塑性流动的不可压缩性与自锁现象、以及交界面接触与摩擦的处理。     

基于程序状态变迁的ASLR机制脆弱性分析方法

地址随机化ASLR是一种针对控制流劫持漏洞的防御机制。已有的漏洞自动分析与利用技术缺少对地址随机化机制影响的分析,导致生成的测试用例在实际环境中的运行效果受到极大限制。针对地址随机化的缺陷及其绕过技术的特点,本文提出了一种地址随机化脆弱性分析方法。该方法使用有限状态机描述程序运行路径中各关键节点的状态;针对常见的内存泄漏与控制流劫持场景建立约束条件;通过求解内存泄露状态约束与控制流劫持状态约束的兼容性,分析地址随机化机制在特定场景下的脆弱性。实验结果显示,该方法可有效检测通过内存泄漏导致的地址随机化绕过及控制流劫持攻击,实现自动化的地址随机化脆弱性分析,提高针对软件安全性分析的效率。     

海水电场受物体电导率及其形状影响分析

海水中电场测量体会对目标电场产生影响,为了提高电场测量的准确度,利用有限元分析的方法研究了物体对海水电场分布的影响因素,并确定畸变电场的分布规律。仿真结果表明:海水电场畸变峰值大小及其畸变区域受物体的电导率及其形状影响,物体电导率小于或大于海水电导率时对电场分布的影响截然相反,物体形状的曲率越大,电场畸变的峰值越大,但畸变区域越小。     

国内外基础化学教学对比及应用

我国目前基础化学的教学内容和课程体系,应参考美、英、德等国的基础化学教育理念和教学手段,从拓宽教学知识体系、引入学科前沿成果、加强案例素材应用、完善多媒体教学、充分发挥学生的主体作用等方面入手,同时通过多种教学手段尝试和改进,达到激发学生兴趣、提升学生科学素养的目的,以增强教学效果。     

公安现役院校推广案例教学的现状与思考

案例教学符合现代教育思想,满足公安现役部队的教育训练需要,适应公安现役院校的办学模式。应通过规范和加强案例库教学,完善案例库建设,加强资金、器材、技术等保障,进一步在公安现役院校推广使用案例教学。     

论偷渡案件中的几个基本法律问题

随着国际形势的变化以及我国对偷渡犯罪案件打击力度的加强,此类犯罪案件的手段及表现形式也日趋复杂,而立法的滞后性又是必然特点,因此,在司法实践中对于具体犯罪的认定方面就出现了意见不一的现象,也引发了理论界的争议。为此,拟对偷渡犯罪案件中的具体犯罪认定的几个问题进行探讨,以期在交流中获得共识。     

加筋板架抗动能穿甲的等效防护厚度研究

为研究舰船舷侧结构抗穿甲性能,采用有限元分析了两种典型工况下板架的穿甲破坏模式、弹体的剩余速度和板架的变形吸能规律,提出了基于剪切冲塞模式的剩余速度理论计算模型,比较了不同等效计算方法得到的结果,并将理论计算结果分别与相关文献的实验结果和本文的有限元计算结果进行了比较,两者之间均吻合较好。结果表明,加强筋对板架的抗穿甲性能影响较大,而板架的实际等效厚度是决定其抗穿甲性能的主要因素;不同的等效计算方法与模型相对尺寸、弹体冲击速度以及命中位置有关,对于弹体直径相对较大且初始冲击速度较高时,不同的等效计算方法得到的结果基本一致。     

空降车着陆缓冲过程车体动态应力仿真研究

为了研究空降车着陆缓冲过程车体结构冲击响应,建立了车体有限元模型,运用显式有限元方法,结合实车空投试验的冲击加速度数据,以力的形式模拟车体着陆缓冲过程所受的冲击,仿真得到普通、恶劣和极限3种工况下着陆缓冲过程车体应力分布。结果表明:在3种着陆工况下,空降车左后立柱底端均为应力最大位置。研究结果可为空降车空投寿命预测及装备保障提供依据。