Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

利用最小二乘支持向量机求解潜艇内外磁场映射模型

为提高潜艇磁隐身能力,应对潜艇固定磁场进行实时监测,提出利用最小二乘支持向量机的潜艇内外磁场映射方法。结合内外映射法和最小二乘支持向量机原理,通过交叉验证优化模型参数,建立由内到外的潜艇磁场映射模型。以潜艇外部垂向固定磁场变化量为分析对象,仿真和实验结果均与标准值吻合良好。与径向基神经网络算法相比,该方法的泛化能力和推算精度有明显提高,且更符合工程实际,对闭环消磁技术的研究具有指导意义。     

Bringing Military Conduct out of the Shadow of Law: Towards a Holistic Understanding of Rules of Engagement

In this article, I outline a holistic approach to the military concept of “Rules of Engagement” (ROE), which complements the legal aspects of ROE with considerations of operational and political requirements for the use of military force. Drawing upon two illustrative cases from the US military experience with the use of ROE, I demonstrate that ROE for any particular military operation should be formulated to balance optimally, if not harmonize fully, the legal, operational and political concerns related to the use of force. In this task, political decision-makers and military practitioners alike are confronted with unavoidable and real-life dilemmas. How these dilemmas are handled has significant implications for how legal requirements concerning accountability and concerns for civilian lives in military combat can be preserved through ROE.     

多碱光电阴极饱和机理研究

多碱光电阴极饱和机理的研究对于提高阴极电子发射能力具有重要意义。依据光电阴极三步电子发射理论,采用蒙特卡洛法研究了多碱光电阴极的电子发射过程。研究结果与相关文献中的实验数据进行了对比分析,光子能量临近光电阴极响应阈值附近时,得到的量子效率曲线以及电子能量分布曲线与实验数据吻合良好。基于上述模型,研究了光压效应和空间电荷效应对多碱光电阴极电子发射特性的影响。结果表明,多碱光电阴极在光压效应限制下的阈值饱和激光能量密度约为8μJ/cm~2,在空间电荷效应限制下的阈值饱和激光能量密度约为2. 23μJ/cm~2。开展了266 nm激光辐照多碱光电阴极实验,经测量,多碱光电阴极的阈值饱和激光能量密度约为2μJ/cm~2,这表明空间电荷效应是限制其光电子发射能力的主要因素。     

复合固体推进剂等效力学性能VCFEM细观预示方法

根据固体推进剂的细观结构特征,采用等圆最优装载方式生成代表性体积单元(Representative Volume Element,RVE)模型,并结合Voronoi单元有限元方法(Voronoi Cell Finite Element Method,VCFEM)和均匀化方法,发展了一种可预示固体推进剂等效力学性能的数值分析方法,从而得到体分比和组分材料对等效模量和等效泊松比的影响规律。为证明该方法的有效性,设计一个对称数值模型,通过对该方法和传统有限元方法的节点位移结果的比较,发现两者之间的相对误差小于5%,且VCFEM用少量单元就完成了分析,提高了计算效率。通过对不同细观结构下推进剂RVE模型的计算,发现随着夹杂体分比的增大,夹杂的颗粒增强效应越明显,基体材料的变化比夹杂材料对等效力学性能有着更加显著的影响。     

强爆轰驱动超高速碎片发射装置设计因素分析

为了得到发射装置设计因素和超高速碎片性能间的关系,考虑了药型罩的材料、炸药种类、装药长径比、药型罩的锥角、药型罩的厚度、药型罩顶部靠近装药侧的曲率半径等设计因素,采用AUTODYNTM,结合正交试验,对超高速碎片的发射过程进行数值模拟。结果表明,3种发射装置结构分别可以提供质量为1. 533 g的紫铜碎片、速度为11. 649 km/s的铝碎片、动能为85. 6 k J的铝碎片; 2种发射装置结构均可以提供质量大于1 g、速度高于11 km/s的密实结构圆柱状碎片。验证了仿真方法的可信性,对影响碎片性能的设计因素进行了分析、排序,并得到了这些设计因素与碎片质量、速度、动能的关系。     

结合全局与局部信息的主动轮廓分割模型

针对传统的基于区域的主动轮廓模型在分割灰度不均匀图像和噪声图像存在效果不佳的问题,提出结合全局项与局部项的主动轮廓分割模型。全局项由CV(Chan-Vese)模型的保真项构成,局部项的构建考虑局部区域信息的同时引入反映图像灰度特性的局部熵信息。依据图像灰度的特点,选择合理的全局项和局部项参数,并加入正则项保证曲线在演化过程中保持平滑,保障分割结果的可靠性。通过变分水平集方法最小化能量泛函,依据梯度下降流迭代更新水平集,完成曲线演化。采用模拟图像和实际图像进行实验分析,结果表明,所提出的结合全局项和局部项的主动轮廓模型可以高效地分割噪声严重以及灰度分布不均匀的图像。     

舰艇编队作战系统的武器目标分配问题

设我方m艘战舰,对方n个来袭目标.运用灰色局势决策求得目标对各个战舰产生的威胁值排序;再用模拟退火算法,参考目标威胁,单舰根据自身装载的火力发射进行初步武器分配;最后将分配结果传送至融合中心,应用大系统理论的分解协调法,协调武器分配,使得我方武器对本批目标的打击概率最大.仿真基于VC++编程实现,具体分析了算法及思想的可行性.