DIP引脚应变分析

为了研究双列直插式元件在振动冲击环境下的可靠性,首先通过建立其物理模型,利用莫尔积分方法对引脚的变形进行分析,可以得到引脚任意位置的变形量;而后建立元件的实体模型,利用有限元方法对其应力应变进行仿真分析,结果表明在外载荷作用下,引脚是元件的薄弱环节,尤其在引脚与其他部位连接位置处易出现应力集中使其应变量较大,导致可靠性降低;最后进行振动冲击环境下的应变测量试验,在30 g的冲击载荷下,引脚的最大变形量可达66.47×10-6,在50 g的冲击载荷下,引脚的最大变形量可达173.95×10-6,在扫频过程中,当激振频率为146.48 Hz时,引脚的变形量最大。     

基于AdaBoost-SVM的P2P流量识别方法

针对传统的P2P流量识别技术存在识别率低和误判率高的缺点,将机器学习中Ada Boost算法的良好分类能力和SVM的泛化能力结合起来,提出一种基于Ada Boost-SVM组合算法的P2P网络流量识别模型,将SVM作为Ada Boost的基分类器,运用最小近邻法计算支持向量与训练集的样本间的距离实现分类进行P2P流量识别。最后,以4种P2P流量数据为研究对象在MATLAB上进行仿真,仿真结果表明,提出的Ada Boost-SVM的组合算法在P2P网络流量的分类性能和分类准确率上都优于单纯的Ada Boost和SVM,组合算法的P2P流量平均识别率高达98.7%,远高于Ada Boost和SVM的识别率。     

Dynamic server assignment policies for assembly‐type queues with flexible servers

We seek dynamic server assignment policies in finite‐capacity queueing systems with flexible and collaborative servers, which involve an assembly and/or a disassembly operation. The objective is to maximize the steady‐state throughput. We completely characterize the optimal policy for a Markovian system with two servers, two feeder stations, and instantaneous assembly and disassembly operations. This optimal policy allocates one server per station unless one of the stations is blocked, in which case both servers work at the unblocked station. For Markovian systems with three stations and instantaneous assembly and/or disassembly operations, we consider similar policies that move a server away from his/her “primary” station only when that station is blocked or starving. We determine the optimal assignment of each server whose primary station is blocked or starving in systems with three stations and zero buffers, by formulating the problem as a Markov decision process. Using this optimal assignment, we develop heuristic policies for systems with three or more stations and positive buffers, and show by means of a numerical study that these policies provide near‐optimal throughput. Furthermore, our numerical study shows that these policies developed for assembly‐type systems also work well in tandem systems. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

过盈配合数值分析与优化设计

围绕高速转盘的过盈配合问题,应用Ansys9.0有限元软件非线性接触技术和优化分析技术确定传递扭矩所需的最佳过盈配合量。实践证明,有限元技术在工程应用中能够优化过盈配合量,缩短设计周期,提高设计质量。     

材料性能对固体发动机结构完整性的影响

基于描述粘弹性材料特性的Burgers模型的本构关系以及基于该本构关系下的有限元方法 ,根据温度载荷和内压载荷的特点 ,分别建立了分析某固体发动机材料性能参数对结构完整性影响的有限元模型。应用MSC/NAS TRAN结构分析软件 ,详细分析了在温度和内压载荷作用下固体发动机材料性能参数对结构完整性的影响。在温度载荷的作用下 ,主要影响结构完整性的是推进剂的泊松比与热膨胀系数 ;在内压载荷作用下 ,主要影响结构完整性的是包覆层和推进剂的泊松比以及推进剂的初始模量。所得的结论可为固体发动机的生产设计提供参考     

不同加载方法对甲板大开口分段有限元计算的误差分析

利用ＭＳＣ－ＮＡＳＴＲＡＮ有限元程序模拟计算甲板大开口的应力．建立简单的总体和分段力学模型,采用不同的加载方法进行甲板应力计算,将局部应力计算结果与整体应力计算结果比较,得出各种加载方法有限元计算的误差,从而给出误差小、建模简单的局部分段模型加载的最佳方法．     

机器翻译中语义块汉英变换处理

首先解释了要素句蜕的内涵,同时介绍了HNC理论的句蜕观,并依据HNC句类理论提出了汉英机器翻译中,要素句蜕处理的具体规则,还结合真实语料进行了验证。     

瞬态温度场有限元法求解的研究

介绍了瞬态热分析的定义和步进积分的特点;研究了两点时问差分格式的瞬态导热温度场有限元法数值解的稳定性和振荡现象;比较和分析了几种差分格式的特点,并应用算例对几种差分算法进行了验证;总结说明了几种差分算法在实际当中的应用。     

Exact algorithms for scheduling multiple families of jobs on parallel machines

In many practical manufacturing environments, jobs to be processed can be divided into different families such that a setup is required whenever there is a switch from processing a job of one family to another job of a different family. The time for setup could be sequence independent or sequence dependent. We consider two particular scheduling problems relevant to such situations. In both problems, we are given a set of jobs to be processed on a set of identical parallel machines. The objective of the first problem is to minimize total weighted completion time of jobs, and that of the second problem is to minimize weighted number of tardy jobs. We propose column generation based branch and bound exact solution algorithms for the problems. Computational experiments show that the algorithms are capable of solving both problems of medium size to optimality within reasonable computational time. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 823–840, 2003.     

反对称铺层碳纤维复合材料圆柱壳的双稳态应力特性

双稳态复合材料可广泛应用于各类可变结构的设计.针对反对称铺层的圆柱壳,利用有限元软件ABAQUS的Standard准静态分析,模拟其双稳态跳变过程和跳回过程,探讨在整个连续过程中圆柱壳上的应力分布情况,以及应力随时间和载荷变化的趋势,从而对该类可变结构的设计起到指导作用.结果表明:该类复合材料圆柱壳跳变过程中最大应力出...