A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于接触的捞雷具夹紧爪接触面形状优化

介绍了在捞雷具夹紧爪设计过程中引入的基于接触的有限元形状优化设计方法.传统的机械设计方法仅考虑了零件的几何尺寸,而对其形状的设计却考虑不够,导致设计结果不理想.文中将基于接触的有限元形状优化方法应用于传统的机械设计过程.对捞雷具夹紧爪建立基于有限元分析的优化设计模型,使夹紧爪既能满足打捞鱼雷的要求,又得到了优化的形状.结构的特性与受力状况均得到改善.     

破片模拟弹侵彻钢板的有限元分析

根据破片模拟弹侵彻钢板的实验研究,采用MSC.Dytran对破片模拟弹侵彻钢板的侵彻过程、侵彻特性、钢板的破坏模式以及弹体的侵彻速度、靶板的侵彻阻力进行了有限元分析,并将分析结果与实验结果进行了比较.分析结果表明,破片模拟弹冲击钢装甲的侵彻过程可大致分为初始接触、弹体侵入、剪切冲塞和穿甲破坏4个阶段.有限元分析的破片模拟弹侵彻特性及靶板破坏模式与实验观测结果有较好的一致性,在靶板破口的正面,与弹体平面凸缘两端接触的部分,变形以剪切为主,而与切削面接触的部分,以挤压变形为主;靶板破口背面为剪切冲塞破坏;有限元模拟的弹体剩余速度与实验结果吻合较好,弹体侵彻过程中弹靶作用界面的速度和侵彻速度近似呈线性变化.有限元分析结果还表明,采用适当的模型,有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式.     

Better is the Neighbor?

Abstract

This study applies the Sequential Panel Selection Method (SPSM), to investigate the convergence properties of the military expenditure of the North Atlantic Treaty Organization (NATO) during the period of 1990–2015. Compared to the traditional methods, SPSM considers fundamentally general spatial homogeneous and heterogeneous relationships with countries and examines the evolution of military expenditure. We find that four-fifths of NATO member countries have been convergent with the UK, but no country’s military expenditure is convergent with the US. This means that there is no significant linkage effect in the US for NATO military expenditure. While they are allies of the US, the majority of NATO member countries’ military expenditures are consistent with UK military expenditure. The main reasons are due to the geographical space layout and the international relationship convergence. The results indicate that more than four-fifths of NATO member countries have been coordinated with convergence theory and spillover effect.     

塔架摆杆系统静动态特性研究

为研究航天发射塔架摆杆系统的静动态特性,利用Pro／E建立其三维实体模型,再将模型导入Abaqus中建立其有限元模型并对该塔架摆杆系统进行静、动态分析计算．通过静态分析,得到塔架关键部位的应力及位移值,对其安全性进行了校核;通过动态分析得到其固有频率及振型,与试验所得频率进行对比,验证有限元建模的正确性．     

基于ANSYS的舰船武器装备基准变化分析方法

舰船武器装备基准在外界环境作用下产生变化,从而影响武器系统的打击精度。应用ANSYS平台建立舰船有限元模型,利用三维波浪载荷的计算方法模拟航行条件下的波浪力,研究了舰船甲板面武器装备基准在两种极限海况下的变化情况,发现针对此类舰船横摇使武器装备基准产生较大的变化,并且靠近尾部和两舷位置处装备的基准变化较为显著。仿真结果表明：当舰船在风浪中航行使用武器系统时,应尽量采取顶浪航行,减少舰船横摇对武器系统基准的影响。     

基于最短拦截时间的异面拦截机动轨道设计与优化

本文构建了单脉冲机动在燃耗约束下的最短时间拦截轨道设计模型与求解方法,将用数学泛函求边值问题转换为高次代数方程的求解计算,并用牛顿迭代法进行快速寻根,仿真结果表明模型及算法准确、有效,满足精度要求。     

土体泊松比对压入管桩单桩挤土位移场的影响

基于ABAQUS有限元软件,采用主从接触算法模拟桩-土相互作用、修正剑桥模型作为土体本构模型,通过在桩顶施加竖向位移荷载以及合适的网格划分技术建立了较为符合压入管桩压桩实际的有限元模型。利用得到的有限元模型模拟了压入管桩压桩产生的挤土位移场,对不同泊松比时压入管桩单桩挤土位移场进行了对比分析。结果表明:不同泊松比时竖向和水平挤土位移场沿深度方向和径向的分布规律趋于一致;土体泊松比的变化会对压入管桩压桩产生的竖向和水平挤土位移场产生较大影响;泊松比越大,压桩产生的竖向和水平挤土位移越大。     

基于栅格分层的逐栅格汇流算法并行化研究

分布式水文模型中的逐栅格汇流算法计算量大,需要借助并行计算以满足大流域长历时模拟的要求。针对目前鲜有对基于隐式有限差分的逐栅格汇流算法进行并行计算研究的情况,基于栅格分层的思想提出一种适用于共享内存并行计算环境的逐栅格汇流并行算法。该算法首先根据流向进行栅格分层,使同一层中栅格的计算相互独立,然后将同一层中栅格的计算任务分配到多个计算单元并行计算。采用C++编程语言与OpenMP并行编程库实现了该算法,并选择河北省清水河流域为实验区,在不同数据规模(30m、90m、270m分辨率)、不同核数(2～20个)以及不同栅格分层方法的情况下对算法性能进行了测试。实验结果表明本文提出的并行算法具有较好的加速比和并行效率,且并行效率随数据规模的增大而增大。栅格分层方法对算法并行性能有明显影响,从上到下的分层方法比从下到上的方法具有更高的并行效率。