基于排队论模型的轮询协议数据链系统时延分析

基于数据链系统的作战方式已经成为了现代化战场的主流,战争中战机稍纵即逝,因此,分析数据链系统的信息传输时延特性意义重大。针对数据链系统信息传输时延问题,分析了数据链系统传输命令消息,目标消息以及中继消息的一般过程,并给出了排队论模型。根据排队论的相关知识得到了轮询协议数据链传输时延的公式,最后利用仿真软件进行了分析研究。     

串联式反后坐装置设计与动力学仿真

利用Runge-Kutta方法确定了火炮串联式后坐系统的参数,设计出串联式反后坐装置结构,并运用ADAMS软件进行了串联式后坐系统动力学仿真,以验证设计结果的准确性。动力学仿真结果与结构设计的参数比较吻合,证明了结构设计结果的准确性,通过串联式后坐系统与单一后坐系统的对比,反映了串联式后坐系统的优越性。     

Risk,War, and the Dangers of Soldier Identity

The profession of arms is distinct from other professions for many reasons. One reason which is not so obvious is that, unlike members of other professions, soldiers may go their entire careers preparing for a day that never arrives. All things considered, we should think this to be a very good thing. For soldiers, however, this can feel somewhat odd, since there is a natural desire to want to feel useful and to see one’s role and purpose find realization. Accordingly, the common soldier is forced to adopt a rather paradoxical mindset, one of longing for peace, and therefore for uselessness, while at the same time longing to be useful, which would entail that there be a war. This latter desire to be useful and to vindicate one’s identity as a soldier can sometimes take on an unhealthy life of its own. The pull of wanting too strongly to live up to a warrior identity, I argue, can sometimes skew a soldier’s ability to assess risk rationally. This article will therefore investigate how a soldier’s concept of self influences his or her overall capacity to evaluate risk in war and when such influence might become morally problematic.     

评估飞控系统的风洞虚拟飞行试验系统与关键技术

为向开展具体的风洞虚拟飞行试验技术提供引导,针对应用于飞控系统评估的风洞虚拟飞行试验系统及关键技术进行了分析。基于传统意义上的飞控系统评估方法的不足,分析风洞虚拟飞行试验应用于飞控系统评估的优势;按飞控系统常用的姿态控制回路及制导控制回路的组成形式,介绍风洞虚拟飞行试验系统方案与工作原理,详细分析它与半实物仿真系统的差异;分析风洞虚拟飞行试验应用于飞控系统评估需解决的关键技术问题,包括风洞虚拟飞行试验评估方法、飞行器模型设计技术、飞控系统改进技术及模型支撑技术。     

Can security vetting be extended to include the detection of financial misconduct?

An analysis of the security vetting files of 19 employees within a South African national department who had been found guilty of financial misconduct in the last five years uncovered that the existing security vetting processes did not detect the financial misconduct of which these employees have been found guilty. This research sets out to establish whether security vetting can be extended to include the detection of financial misconduct within the department and, if so, how. Moreover, if security vetting can indeed be so extended, can it possibly enhance the management of fraud risk across all South African public sector departments? Qualitative interviews were conducted with 27 employees who are key to fraud risk management and security vetting within the researched department. During the interviews, the following five themes emerged: (1) the reasons why employees commit financial misconduct; (2) why it is not detected by the security vetting process; (3) the potential alignment of the security vetting process to facilitate the detection of financial misconduct; (4) the following through on security vetting findings; and (5) sharing these findings with the internal audit and risk management functions within state departments. These themes were probed and are reported on, establishing firstly that security vetting can indeed be extended to include the detection of financial misconduct within the researched department, and secondly that it can enhance the management of fraud risk across all South African public sector departments, given the specific mandate of the State Security Agency (SSA) and the national security vetting strategy.     

基于飞行仿真的近地告警包线计算

TSO-C151b标准中近地告警包线为通用模型设计,未结合飞机的自身特性。为精确给出飞机过大下降速率告警包线,通过结合飞机自身气动特性和操纵特性,分析告警机理,建立飞机六自由度仿真程序。依据飞机发动机数据、气动力数据、质量特性数据等,建立仿真模型及操作程序,实时模拟飞机各舵面的操作响应过程,以及飞机的运动姿态和飞行轨迹,计算飞机在不同下降速率时拉起的损失高度,设计近地告警包线。实际试飞数据验证了模型设计合理,计算结果准确。同时,将仿真计算得出的告警包线与TSO-C151b对比,给出适用于飞机的近地告警包线使用建议,保证飞机飞行安全。     

一种高炮拦阻射击新体制

针对高炮拦阻射击,提出了一种新射击体制,详细叙述了该体制的实现机理,并建立了数学模型。在此基础上,针对某型现役高炮的武器性能参数,探讨了初速序列的确定等关键问题,并进行了数值计算。该体制射击过程中不需要改变方向角和射角,对随动系统的要求大幅降低,可缓解自行高炮系统的随动制约,还可使大量随动性能较差的牵引高炮重新焕发生机。该体制的提出与最终实现对提升高射综合体防空反导作战效能具有重要意义。     

分段履带式水陆两栖车减阻增速试验及数值仿真

为了研究分段履带式水陆两栖车的水动力性能,实现减阻增速,将尾翼板安装到水陆两栖车的方艉部,并开展了水池试验和仿真研究,两者的研究结果具有较好的一致性。通过仿真研究了车体的纵向重心位置、尾翼板的长度和角度对水陆两栖车阻力性能的影响,并分析了阻力成分的变化趋势。研究结果表明:车体纵向重心位置在540～560 mm 时,车体所受水阻力最小;在速度为3～5 m/s时,长度为156 mm,与水平面夹角为10°的尾翼板减阻效果最明显,相比于原裸车体的阻力,减阻率达到34.3%;加装尾翼板可以增加车体的尾部中空区长度,相当于增加了水线长,增大了长宽比。该研究表明:适当调节重心位置和优化尾翼板参数,可以有效实现水陆两栖车的减阻增速。     

伞衣优化设计对群伞系统气动特性的影响分析

随着载人航天、深空探测等航天任务的蓬勃发展,航天器回收载荷质量大幅提高,以单具降落伞为功能核心的传统减速系统已不能满足大质量回收载荷日益提高的迫切要求,发展群伞减速着陆系统是实现大载重航天器高效减速和无损着陆要求的发展方向。本文采用数值模拟手段对群伞系统的气动特性开展仿真研究,结合环帆伞构型优化设计,分析了多种构型下群伞系统的气动特性。通过对仿真结果进行流场分析和数据对比发现,开窗/开缝设计既能够确保群伞系统具有良好的阻力特性,又能够维持群伞系统的工作稳定性,避免单伞之间由于受力而发生碰撞现象。采用数值仿真手段不仅可以提高降落伞研制效率,降低研发成本,也为设计人员掌握群伞系统的工作原理、促进降落伞设计理论发展提供了有力保证。     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.