超高斯随机振动环境的疲劳强化机理

针对可靠性强化试验的全轴随机振动环境的超高斯幅值分布特性开展其疲劳强化机理研究。首先通过理论分析表明RS机振动激励下试件应力仍保持超高斯分布,然后证明了同等量级下的超高斯分布比高斯分布随机应力具有更高的疲劳强化效能,从而揭示RS机全轴随机振动环境超高斯幅值分布特性的疲劳强化机理。     

可靠度限制下相控阵雷达天线阵面T/R单元维修模型

为了描述维修活动对相控阵雷达天线阵面系统的影响,构建了以可靠度为基础的“修旧不如新”定期维修优化模型。对相控阵雷达T/R单元失效下的天线性能参数进行分析,根据指标确定系统不能正常工作的失效T/R单元阈值; 针对大部分维修活动都难以使T/R单元修复如新的事实,引入失效率递增因子,在系统一定的可靠度水平上,以相控阵雷达系统的使用可用度和维修费用率为优化决策参数,建立了系统的维修优化模型,并运用边际效能算法对系统的最佳预防换件维修周期和换件维修组数量进行求解。实例运算结果表明,该模型突破了已有模型“修旧如新”的限制条件,更符合实际,能为维修策略的制定提供理论依据。     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

星载大容量固态存储控制器的级联编码设计

航天器大容量数据存储设备主要采用基于NAND Flash的固态存储器,但由于空间环境中单粒子翻转效应的影响,以及存储器芯片在操作过程中因为阈值电压偏移导致的位比特错误等原因,存储设备的可靠性降低。为提高数据存储设备的数据容错性,依据NAND Flash芯片物理结构和数据存储结构,具有针对性地提出RS(256,252)码+LDPC(8192,7154)码级联的纠检错并行编码设计,并优化编码算法的电路实现方法。建模仿真和地面测试系统测试结果表明:该设计具有低硬件开销、低功耗和高可靠性的优点。存储系统的数据总容量达512 Gb,有效数据吞吐率为700 Mb/s,能够满足航天器固态存储控制器对大容量数据控制和高数据吞吐量的设计需求。     

电磁发射弹丸飞行弹道仿真

针对电磁发射弹丸飞行弹道进行仿真研究,在建立刚体六自由度飞行弹道模型的基础上,采用时频分析和涡流分析方法,建立电磁-动力学耦合模型分析弹丸出膛时由于膛内振动带来的炮口扰动,采用动网格技术建立电磁-气动耦合模型分析弹托分离产生的气动扰动,从而得到了电磁发射弹丸的飞行弹道模型。以得克萨斯大学先进技术研究所设计的IAT-HVP为例,仿真分析了弹丸以1117 m/s初速、0°射角出膛时弹丸出口扰动对弹体速度和气动特性的影响,并得到其飞行200 m的弹道曲线。仿真结果表明,受电磁发射一体化弹丸出口扰动的影响,弹体落点相比理想弹道产生了24%的偏差,其中炮口扰动引起的偏差最大,其次是弹托分离。     

指数寿命产品可靠性增长试验的Bayes分析

针对指数寿命产品的定时、定数截尾试验方案,推广了Mazzuchi-Soyer模型的应用范围。首先引入模型假设,以狄氏分布作为先验分布,综合利用产品研制的历史信息和专家信息,结合产品研制各阶段试验数据,给出了各阶段可靠性的联合后验分布。然后利用Gibbs抽样算法解决后验推断计算问题,得到各阶段产品可靠性的Bayes点估计和区间估计。最后给出产品可靠性增长分析实例,表明了模型的优越性。     

小子样条件下基于Normal-Poisson过程的性能可靠性评定

对于高可靠、长寿命产品,基于性能退化数据分析可靠性是一种行之有效的技术途径。结合航空航天产品性能退化的机理与现场试验小子样的特点,建立了基于Normal-Poisson过程的性能退化模型。论文在对产品性能退化建模的基础上,结合Bayes方法给出了退化模型参数的估计算法和可靠性推断的公式,最后结合实例说明了方法的有效性。     

Replacing nonidentical vital components to extend system life

We consider a system that depends on a single vital component. If this component fails, the system life will terminate. If the component is replaced before its failure then the system life may be extended; however, there are only a finite number of spare components. In addition, the lifetimes of these spare components are not necessarily identically distributed. We propose a model for scheduling component replacements so as to maximize the expected system survival. We find the counterintuitive result that when comparing components' general lifetime distributions based on stochastic orderings, not even the strongest ordering provides an a priori guarantee of the optimal sequencing of components. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

The logistic–exponential survival distribution

For various parameter combinations, the logistic–exponential survival distribution belongs to four common classes of survival distributions: increasing failure rate, decreasing failure rate, bathtub‐shaped failure rate, and upside‐down bathtub‐shaped failure rate. Graphical comparison of this new distribution with other common survival distributions is seen in a plot of the skewness versus the coefficient of variation. The distribution can be used as a survival model or as a device to determine the distribution class from which a particular data set is drawn. As the three‐parameter version is less mathematically tractable, our major results concern the two‐parameter version. Boundaries for the maximum likelihood estimators of the parameters are derived in this article. Also, a fixed‐point method to find the maximum likelihood estimators for complete and censored data sets has been developed. The two‐parameter and the three‐parameter versions of the logistic–exponential distribution are applied to two real‐life data sets. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008