基于非独立测试的诊断策略优化生成

诊断策略优化设计是测试性设计中的一项重要内容.实际中的测试彼此间并非独立,即测试费用依赖于测试的先后顺序,针对这一问题,提出将测试划分成不同的测试模式,规定当一个测试序列中存在模式变换时必须考虑附加的转换费用.建立了同时考虑测试费用和模式转换费用启发式评估函数,并基于该启发式评估函数设计了近似最优的搜索算法,应用案例验证了本算法.试验表明该方法有效地解决了非独立测试的诊断策略优化生成问题.     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

FlexRay在导弹测试系统中的应用

针对导弹测试系统可靠性差、通信速率低的缺点,在分析测试需求的基础上,提出了一种基于Flex Ray总线技术的导弹测试系统总体设计方案,给出了数字信号处理器与总线控制器的接口硬件电路、软件流程,分析了设计中需要考虑的主要问题。     

试飞多目标实时定位系统的设计与实现

针对空空多目标攻击问题,运用一种基于全球定位系统(GPS)、时分多址(TDMA)和频分多址(FDMA)相结合的技术,设计了试飞多目标实时定位系统。在试飞中通过无线数据链路实时获取多个目标的GPS位置、速度数据,进行插值推算等数据融合处理后,发送给评估系统,作为空空多目标攻击技术实时评估的基准信息。系统具有定位精度高、系统数据更新率快,在实际应用中显示了良好的性能。     

协议测试中测试序列生成方法综述

文章在介绍协议一致性测试基本概念的基础上,重点列举了测试序列的几种生成方法。对目前广泛采用的形式化描述模型,重点介绍其中基于有限状态机模型的测试序列生成方法,同时对基于扩展有限状态机以及确定有限状态机的测试序列生成方法也进行了介绍。文章对每一种方法介绍了其原理并分析了其使用中的局限。文章最后指出了在协议测试中面临的问题和进一步研究的方向。     

2014nccet:基于SI仿真的高密度存储服务器高速链路设计

针对高密度存储服务器中高速链路结构复杂、信号速率高、链路长度长等特点,在高速链路PCI-E3.0和SAS3.0设计过程中引入全面的SI仿真。通过对高速PCB设计中拓扑结构、材料类型、PCB结构等关键项目进行仿真设计,获得成本最低、性能达标的最优方案;通过全链路有源仿真,预估系统性能,降低系统投产风险;通过系统实际信号测试,验证系统性能完全满足相应规范要求,仿真结果有效可靠。     

级间设计人机联合探月方案

利用登月飞行器的级间组合设计方法对载人登月飞行器的构造进行设计,在级间方案的论证中分析了不同组装模式对运载火箭能力的需求,建立了航天员和机器人联合探测的载人登月方案。级间组合方法可为应转移飞行器和登月飞行器设计提供另一种思路,根据飞行器级间的不同组合方式对登月飞行器的质量规模进行了初步估算,并对比了不同飞行方案对运载火箭能力的需求,研究可为我国首次载人登月任务方案提供参考。     

多波束相控阵天线角跟踪性能及测试方法

针对目前对多波束相控阵天线角跟踪性能测试研究较少的问题,首先分析了多波束相控阵天线的单脉冲和差测角方法,并对波束滑动、波束穿越及信号频率变化对角跟踪性能的影响进行了仿真分析。类比传统的雷达精度校飞试验,提出了基于飞艇的角跟踪性能测试方法,对角跟踪精度及误差范围进行测试,并利用STK软件实现了可视化。仿真分析表明,该方法可以实现对多波束相控阵天线角跟踪性能的评定并具有较高的工程应用价值。     

STK飞行任务仿真及其在空地链路分析中的应用

飞行仿真是飞行航路设计,飞行任务规划以及飞行训练等项目中非常重要的一项任务。介绍了在STK(Satellite Tool Kit)的三维显示环境下,利用STK提供的专业化模块STK/AMM(Aircraft Mission Modeler)进行航空器飞行任务仿真的方法,详细阐述了利用该模块进行飞行任务规划和飞行路径设计的过程。同时结合STK的数据分析功能完成航空器在飞行过程中与地面台站的通信链路的可用性分析。给出的仿真方法较以往的仿真方法简单,设计过程更加灵活,可以快速地实现飞行任务仿真设计和空地通信链路的可用性分析。