Kurtosis correction method for X̄ and R control charts for long‐tailed symmetrical distributions

This paper proposes a kurtosis correction (KC) method for constructing the X? and R control charts for symmetrical long‐tailed (leptokurtic) distributions. The control charts are similar to the Shewhart control charts and are very easy to use. The control limits are derived based on the degree of kurtosis estimated from the actual (subgroup) data. It is assumed that the underlying quality characteristic is symmetrically distributed and no other distributional and/or parameter assumptions are made. The control chart constants are tabulated and the performance of these charts is compared with that of the Shewhart control charts. For the case of the logistic distribution, the exact control limits are derived and are compared with the KC method and the Shewhart method. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

大型飞行器制导与姿态控制联合仿真建模研究

针对固体火箭发动机、机动发射的大型飞行器的特点 ,提出了建立大姿态情况下全量、全干扰、非线性、时变的制导与姿态控制联合仿真数学模型的一般方法。以某型号固体发动机、机动发射的飞行器为背景 ,在综合考虑了控制系统动态特性和飞行器质心运动、绕质心运动、变质量特性、弹性振动特性、风干扰等因素的情况下 ,建立了飞行器的联合仿真数学模型。进而在面向对象仿真环境下 ,建立了直观、形象、易理想、易扩充的面向对象的飞行器联合仿真模型。仿真结果表明所建联合仿真模型是正确和有效的     

前馈控制的神经网络实现

不依赖对象模型,在前馈-反馈定值控制系统中,借助神经网络构成前馈控制器,以反馈输出引导网络权值及输出的调整,使网络逐步学成前馈补偿功能,并最终在控制中占据主导地位,实现对主要可测干扰的补偿.文章分析了神经网络前馈控制器的作用效果,并与根据精确模型设计的常规前馈控制器的作用特性进行了比较.文中采用两种不同方式对神经网络进行训练,仿真结果证实了在模型未知的条件下,利用神经网络实现前馈控制的有效性.     

离散变结构系统的组合控制策略研究

对离散变结构控制系统的趋近律方法进行研究,提出了4种组合控制策略,它们可以明显改善系统的动态性能,并给出应用例子加以验证．     

正弦波型直流无刷电动机位置伺服系统的变结构控制

在分析正弦波型直流无刷电动机数学模型的基础上,采用比例等速变速控制策略(PCV)设计控制器,应用于正弦波型直流无刷电动机位置伺服系统.仿真结果表明:与传统PI控制器比较,PCV控制策略可以明显改善系统的品质,并增强系统的鲁棒性.     

高炮火控系统模拟训练及综合评价系统

提出了一种新型的基于计算机及计算技术的高炮火控系统仿真模拟训练及综合评价系统的设计方案。这一方案不仅注重了系统实现仿真训练的基本功能,同时还利用计算机仿真优势,强调了对训练效果的评估及对训练模式的总结。提出了实时决策支持的新概念     

59D坦克火控系统的校准操作研究

通过分析坦克射击准备误差诸因素的地位变化情况,得出火控系统校准误差是影响首发命中的关键因素.在此基础上,重点研究了59D坦克火控系统的校准操作程序和方法,所得结论对部队科技练兵具有一定的指导意义.     

Optimal control of an M/G/1 queue with impatient priority customers

An optimal operating policy is characterized for the infinite‐horizon average‐cost case of a single server queueing control problem. The server may be turned on at arrival epochs or off at departure epochs. Two classes of customers, each of them arriving according to an independent Poisson processes, are considered. An arriving 1‐customer enters the system if the server is turned on upon his arrival, or if the server is on and idle. In the former case, the 1‐customer is selected for service ahead of those customers waiting in the system; otherwise he leaves the system immediately. 2‐Customers remain in the system until they complete their service requirements. Under a linear cost structure, this paper shows that a stationary optimal policy exists such that either (1) leaves the server on at all times, or (2) turns the server off when the system is empty. In the latter case, we show that the stationary optimal policy is a threshold strategy, this feature being commonplace in most of priority queueing systems and inventory models. However, the optimal policy in our model is determined by two thresholds instead of one. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 201–209, 2001     

中庭防排烟系统性能化设计探析

阐述中庭防排烟性能化设计的具体过程 ,并对防排烟系统设计的运用进行举例。     

智能控制在光纤陀螺光源稳定控制中的应用

根据光纤陀螺(FOG)对超辐射发光二极管(SLD)光源输出光功率的稳定性要求,针对目前SLD光源一致性差的特点,提出Fuzzy PID控制的光控实现方案。经验证,该智能光功率闭环控制能灵活调整SLD期望输出光功率值,不仅能实现SLD在宽温度范围内保持较高的光功率稳定性,且系统具有较强的鲁棒性。