A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

天然气在土壤中泄漏的稳态温度场分析

埋地高压天然气经小孔泄漏会导致土壤冻结形成冻土,应用一元气体动力学、流体力学和传热学知识建立了天然气小孔泄漏吸热率模型和土壤稳态温度场模型,并进行了实例计算。结果表明：当天然气输送压力小于临界压力,小孔泄漏吸热率随压力的增大而增大;当天然气输送压力大于等于临界压力,小孔泄漏吸热率达到最大值;冻土厚度随土壤热导率或空气对流传热系数的增大而减小,但土壤热导率对其影响较小,空气对流传热系数对其影响较大。     

径向载荷作用下管道挤压变形过程数值模拟

野外埋地敷设的长距离输油管道发生断裂等较大事故时,采用管道局部挤压的方式可以在较短时间内将管道快速压扁以截断流油。为设计管道挤压截流装置,运用ANSYS Workbench建立上下压头加载作用下管道挤压的有限元模型,完成对ф159 mm×5 mm的45号钢挤压变形模拟仿真,得到管道挤压的等效应力、位移分布、变形范围和载荷-位移曲线等。将模拟数据与实验数据进行对比,两者结果比较吻合,可以为管道泄漏抢修提供理论和实践参考。     

Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.     

A numerical study on the disturbance of explosive reactive armors to jet penetration

The disturbance of flat and V-shaped sandwich reactive armor configurations to shaped-charge jet is studied by a numerical approach. The disturbing and cutting effects of the two reactive armor configurations to the jet are successfully captured. The predicted disturbance characteristics and patterns are in fairly good agreement with the X-ray photographic observations. The residual depth of penetration into a semi-infinitive homogeneous steel target behind the reactive armor is computed for a series of jet/armor parameters. For the flat configuration, it is demonstrated that the residual penetration depth is not significantly reduced for a normal impact while it is reduced up to 75% for an oblique impact. In comparison, the V-shaped configuration reduces the penetration depth of the jet to 90%, and it is observed that the penetration depth is not sensitive to the V-shaped angle.     

尾流自导鱼雷带角射击弹道仿真

为简化指控系统解算流程,缩短指控系统解算尾流自导鱼雷带角射击参数时间,为后续的鱼雷模拟器的软件研制提供实现手段,提出在尾流自导鱼雷有利提前角射击弹道的基础上进行二次转角航行的改进的尾流自导鱼雷带角射击模型。依据尾流自导鱼雷射击原理,结合有利提前角射击和二次转角射击,对所提出的模型及其约束条件进行了分析与推导,简化了鱼雷带角射击参数的解算。深入分析了尾流自导鱼雷带角射击逻辑,提出采用面向过程设计方法对模型进行仿真,经过对仿真输出图形和仿真数据的分析,验证了所提出模型的准确性。     

基于MDFT框架的海上能源通道航线动态决策建模与仿真

针对常规海上航线决策没有考虑决策选择过程的问题,引入多选择决策场理论（ MDFT）,构建了海上能源通道航线动态决策模型。基于信息完备、信息不确定和特殊情况等三种情景想定,进行了海上能源通道航线规划决策及其实验仿真。结果表明,决策过程受时间压力和信息质量的制约,时间压力会制约决策质量,同时还可能引起“偏好逆转”现象,信息不确定也会导致确定性决策。该模型不仅综合考虑了海上能源通道航线选择时需关注的各类要素,且模型参数可动态调整,进而能合理模拟真实的海上状况和决策过程。     

舰艇箔条质心干扰对抗多威胁目标方法

摘 要：在未来海战中,水面舰艇将面临多枚导弹攻击的威胁,传统的箔条质心干扰发射决策方法无法有效干扰来袭的多枚导弹;在分析传统箔条质心干扰成功条件的基础上,建立了箔条质心干扰对抗多目标成功判断模型,通过仿真计算,提出了箔条质心干扰对抗多威胁目标方法;可充分发挥现役无源干扰装备的作战潜能,提高海军水面舰艇的生存能力。     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。