基于GIS的陆军野战防空指挥自动化系统分析

从陆军面临的空中威胁目标出发,分析了陆军野战防空的主要特点及对指挥自动化系统的要求,提出了基于地理信息系统(Geographic Information System:GIS)的陆军野战防空指挥自动化系统的设想,并建立了基本的结构模型.最后,根据系统论的思想更深层地说明了陆军野战防空指挥自动化系统建设的重要性.     

Flow‐shop batch scheduling with identical processing‐time jobs

In many practical situations of production scheduling, it is either necessary or recommended to group a large number of jobs into a relatively small number of batches. A decision needs to be made regarding both the batching (i.e., determining the number and the size of the batches) and the sequencing (of batches and of jobs within batches). A setup cost is incurred whenever a batch begins processing on a given machine. This paper focuses on batch scheduling of identical processing‐time jobs, and machine‐ and sequence‐independent setup times on an m‐machine flow‐shop. The objective is to find an allocation to batches and their schedule in order to minimize flow‐time. We introduce a surprising and nonintuitive solution for the problem. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Two‐machine flow shop no‐wait scheduling with a nonavailability interval

We study a two‐machine flow shop scheduling problem with no‐wait in process, in which one of the machines is not available during a specified time interval. We consider three scenarios of handing the operation affected by the nonavailability interval. Its processing may (i) start from scratch after the interval, or (ii) be resumed from the point of interruption, or (iii) be partially restarted after the interval. The objective is to minimize the makespan. We present an approximation algorithm that for all these scenarios delivers a worst‐case ratio of 3/2. For the second scenario, we offer a 4/3‐approximation algorithm. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

过模慢波结构高频特性

对过模结构在提高功率容量方面的优点进行了理论分析;分别采用解析方法和有限元方法研究了理想无限长过模慢波结构及有限长过模慢波结构色散关系的特点,对比了这两种情况下TM01模色散特性的区别,结果表明两者在纵向波数取值及对应的频率上有所差别,这对于高功率微波器件高频结构的设计有重要的参考价值。     

Influence of a liquid-filled compartment structure on the incoming shaped charge jet stability

Liquid-filled compartment structure consists of a bulk steel plate with matrix blind holes which are filled with liquid and a steel front plate to seal up the liquid with rings and bolts.The liquid-filled compart-ment structure can resist the shaped charge warhead effectively.This paper presents experimental and theoretical investigations of the penetration ability of the residual shaped charge jet emerging from the liquid-filled compartment structure after the penetration process at different impact angles.On the basis of shock wave propagation theory,the influence of the liquid-filled compartment structure on jet sta-bility is analysed.The interferences of the liquid backflow caused by a reflected shock wave and a back plate on jet stability under different impact angles are also examined.In addition,the range of the disturbed velocity segments of the jet at different impact angles and the penetration ability of the re-sidual jet are obtained.A theoretical model is validated against the experimental penetration depths.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Adaptive phasefield modelling of crack propagation in orthotropic functionally graded materials

In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive mesh refinement. The proposed approach is capable of capturing the fracture process with a localized mesh refinement that provides notable gains in computational efficiency. The implementation is validated against experimental data and other nu-merical experiments on orthotropic materials with different material orientations. The results reveal an increase in the stiffness and the maximum force with increasing material orientation angle. The study is then extended to the analysis of orthotropic FGMs. It is observed that, if the gradation in fracture properties is neglected, the material gradient plays a secondary role, with the fracture behaviour being dominated by the orthotropy of the material. However, when the toughness increases along the crack propagation path, a substantial gain in fracture resistance is observed.     

临近空间飞艇内部自然对流的流场特征仿真

针对临近空间飞艇,对其内部氦气的自然对流特征进行了数值模拟。采用计算流体力学方法,并利用自编的用户自定义函数将外部的温度边界条件导入壁面网格。在不同的稳态条件下,通过对内部氦气压力、温度、速度的分布等流场特征参数的研究,分析了临近空间飞艇内部气体自然对流的运动特性及其影响规律,并对自然对流非稳态变化过程进行了初步的探索。仿真结果表明,在临近空间环境下,飞艇内部氦气的自然对流,对于内部氦气自身的热交换具有一定程度的促进作用,而对蒙皮受力和结构安全性影响很小。     

基于人工势场法和Ad-hoc网络的多机器人编队控制

ad-hoc网络具有自组性强、快速组网和高抗毁等特性,以它组网的多机器人编队适用于一些无法预先安装通信设备的特殊场合。但是由于ad-hoc网络的通信覆盖范围有限、网络动态性强,在进行编队控制时如果不考虑编队中机器人之间的通信距离,可能导致机器人因与网络失去联系而脱离编队。为了确保多机器人编队的完整性,在使用势场法进行编队控制时,除考虑目标和障碍物的影响外,同时将机器人之间的通信距离作为一种引力加入传统的环境势场模型。仿真实验的结果证明该方法可以有效地控制ad-hoc方式组网的机器人编队。     

点电荷对的电力线和等势面的计算机模拟

为了了解空间各点电场强度的大小和方向,需要借助于电力线或等势面。研 究了由电势叠加原理计算出点电荷对的等势面方程,由高斯定理计算出点电荷对的电力线 族方程,并用Mathematica软件作出了相应的图。该方法简单、准确。