紊流时输油管道油流静电带电计算研究

对紊流条件下输油管道内油流静电带电的计算进行了研究。在合理简化紊流扩散系数和油流速度的基础上,推导出油内有关油流带电的电荷输运方程的解析解,并且根据该解析解导出了冲流电流计算公式。该计算公式同时适用于所有电导率范围内液体介质冲流电流的计算。最后利用文中推出的计算公式对一实验油道的油流带电进行了计算,结果显示公式得到的值和实验值非常吻合。     

A note on combined job selection and sequencing problems

We investigate the solvability of two single‐machine scheduling problems when the objective is to identify among all job subsets with cardinality k,1≤k≤n, the one that has the minimum objective function value. For the single‐machine minimum maximum lateness problem, we conclude that the problem is solvable in O(n²) time using the proposed REMOVE algorithm. This algorithm can also be used as an alternative to Moore's algorithm to solve the minimum number of tardy jobs problem by actually solving the hierarchical problem in which the objective is to minimize the maximum lateness subject to the minimum number of tardy jobs. We then show that the REMOVE algorithm cannot be used to solve the general case of the single‐machine total‐weighted completion time problem; we derive sufficient conditions among the job parameters so that the total weighted completion time problem becomes solvable in O(n²) time. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 449–453, 2013     

非周期不完全检测下的维修优化

针对gamma退化型单部件系统,基于更新和半更新过程理论建立了以期望费用率最小为目标的非周期不完全检测下的维修优化模型。利用检测规划函数使系统的检测间隔期可以依据系统的状态进行调整。为更加贴近实际,模型考虑了测量误差对维修优化的影响。通过计算可以得到最优预防性维修阈值和检测方案。给出了模型的应用算例,通过对退化速率和费用参数的灵敏度分析说明了模型的有效性。与不考虑检测误差的优化结果进行对比,证明了考虑检测误差的重要性。     

动态液-液旋流分离器油滴运动轨迹模拟

针对动态液-液旋流分离器油、水两相过程,从流体力学基本方程出发,采用雷诺应力模型、QUICK差分格式和SIMPLE算法模拟分析动态液-液旋流分离器内的流场;并以此为基础,采用离散相模型和多相流模型,模拟油、水两相分离过程和油滴运动轨迹.模拟结果表明:油滴粒径决定其在旋流分离器中的运动轨迹、速度及分离特性,大粒径油滴更易于向中心聚集形成油芯,油芯的形状与油滴的大小直接相关;动态液-液旋流分离器的主要分离过程在转筒内完成,油相分离效率随着油滴粒径的增大而提高.     

海拔高度对发动机泵机组性能的影响

介绍250型泵机组基本参数,详细阐述该型发动机泵机组的动力传递关系,应用FST2E型测试台架开展泵机组发动机高原效能模拟试验,获取发动机在不同海拔高度的功率、燃油消耗率和油耗量数据,拟合生成发动机负荷特性曲线。定量分析不同海拔高度发动机功率下降对离心泵体积流量、效率、扬程等的影响,得出泵机组体积流量、扬程、效率的下降规律。研究结果可为现有泵机组的使用及新型泵机组的研制提供理论依据和数据参考。     

面向时空交通栅格流量预测的3D通道注意力网络

城市交通流量预测对交通管理和公共安全具有重要意义。然而,交通栅格流量数据中的规律在时刻变化,在城市中存在全局范围的时空间关系,并且不同特征通道在每个城市区域上有不同的重要性。为解决这些挑战并做出更准确的预测,设计了一种新颖的时空神经网络模型——3D通道注意力网络(three-dimensional channel-wise attention networks,3D-CANet)。提出一个3D通道内注意力(three-dimensional inner channel attention,3D-InnerCA)单元来动态捕获各个通道中不同的全局时空相关性,同时设计通道间注意力(inter channel attention,InterCA)单元来自适应地重校准每个区域上不同特征通道的贡献。在3个真实交通栅格流量数据集上的实验结果表明,3D-CANet模型的预测能力优于其他对比方法,证明了模型的有效性。     

基于传输方程空化模型的定常自然空化流场数值计算

采用基于传输方程的空化模型,应用自主开发的软件对水翼和水下回转体定常自然空化流场进行了数值计算。采用基于压力修正和多块结构化网格的有限体积方法数值求解Favre平均的NS方程,运用k-ε两方程加壁函数的湍流模式封闭雷诺应力。计算结果与已有实验结果符合较好。     

Interval scheduling: A survey

In interval scheduling, not only the processing times of the jobs but also their starting times are given. This article surveys the area of interval scheduling and presents proofs of results that have been known within the community for some time. We first review the complexity and approximability of different variants of interval scheduling problems. Next, we motivate the relevance of interval scheduling problems by providing an overview of applications that have appeared in literature. Finally, we focus on algorithmic results for two important variants of interval scheduling problems. In one variant we deal with nonidentical machines: instead of each machine being continuously available, there is a given interval for each machine in which it is available. In another variant, the machines are continuously available but they are ordered, and each job has a given “maximal” machine on which it can be processed. We investigate the complexity of these problems and describe algorithms for their solution. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Integrated production scheduling and preventive maintenance planning for a single machine under a cumulative damage failure process

This paper finds the optimal integrated production schedule and preventive maintenance plan for a single machine exposed under a cumulative damage process, and investigates how the optimal preventive maintenance plan interacts with the optimal production schedule. The goal is to minimize the total tardiness. The optimal policy possesses the following properties: Under arbitrary maintenance plan when jobs have common processing time, and different due dates, the optimal production schedule is to order the jobs by earliest due date first rule; and when jobs have common due date and different processing times, the optimal production schedule is shortest processing time first. The optimal maintenance plan is of control limit type under any arbitrary production schedule when machine is exposed under a cumulative damage failure process. Numerical studies on the optimal maintenance control limit of the maintenance plan indicate that as the number of jobs to be scheduled increases, the effect of jobs due dates on the optimal maintenance control limit diminishes. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007