油水两相分层流层流流速分布计算分析

利用剪切力比模型,进一步讨论了油水两相分层流层流流动的速度分布规律,将水相流速假设为抛物线形式分布与实验结果有较大偏差,将水相分为拖曳和返流两段更接近实际情况,模型所得水相计算结果更接近实验数据。指出剪切力比模型能否适合于油水两相分层流动计算理论需要更多实验结果验证。     

临近空间飞艇内部自然对流的流场特征仿真

针对临近空间飞艇,对其内部氦气的自然对流特征进行了数值模拟。采用计算流体力学方法,并利用自编的用户自定义函数将外部的温度边界条件导入壁面网格。在不同的稳态条件下,通过对内部氦气压力、温度、速度的分布等流场特征参数的研究,分析了临近空间飞艇内部气体自然对流的运动特性及其影响规律,并对自然对流非稳态变化过程进行了初步的探索。仿真结果表明,在临近空间环境下,飞艇内部氦气的自然对流,对于内部氦气自身的热交换具有一定程度的促进作用,而对蒙皮受力和结构安全性影响很小。     

电力市场环境下发电厂机组检修计划

分析了传统的统一调度下和电力市场环境下发电厂机组检修计划的不同,在此基础上提出不同于以往的检修计划方法。以检修费用、电价收益损失和违约金之和最小为目标函数,然后采用0-1整数规划的直接枚举法求解。最后通过算例论证了该方法的可行性。     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

气动光学效应中调制传递函数的计算方法

从Maxwell方程出发 ,推导了光在湍流中传播的调制传递函数的计算公式。依据折射率起伏相关函数的两种形式 ,计算了光学相位差。根据湍流的动能和动能耗散率输运方程 ,建立了折射率起伏方差的计算模型。最后 ,指出了文中所给公式的适用范围 ,对更好地进行调制传递函数的计算提出了建议。     

求解传感器网络最大生存时间的最大流算法

节能是传感器网络研究的中心问题之一,目的是延长网络的生存时间。因此对于一个给定网络,很自然地关心它的最大生存时间是多少。从网络最大流的角度分析这个问题,给出了求解传感器网络最大生存时间确切值的算法。     

A new appointment rule for a single-server,multiple-customer service system

This paper proposes a new appointment rule for the single-server, multiple-customer service system. Unlike previous appointment rules, which perform well only in specific service environments, the new rule can be parameterized to perform well in different service environments. The new appointment rule is presented as a mathematical function of four environmental parameters, namely, the coefficient of variation of the service time, the percentage of customers' no-shows, the number of appointments per service session, and the cost ratio between the server's idle and customers' waiting cost per unit time. Once the values of these environmental parameters are estimated, the new appointment rule can be parameterized to perform well. The results show that new rule performs either as well as or better than existing appointment rules in a wide range of service environments. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 313–326, 1998     

低雷诺数壁面约束流动皮托管测速误差分析与校正

针对低雷诺数壁面约束流动中皮托管测速误差产生的两大主要影响因素——剪切速度与近壁效应,采用计算流体力学技术分别对其进行数值模拟,并研究各自引起的误差变化规律。数值模拟结果表明:虽然剪切速度引起的流线偏移规律与相关文献结论基本一致,但是数值结果预测的流线偏移量并不是一个渐近函数;近壁距离在5倍管径即出现较为明显的测量误差,并且发现近壁距离在1倍管径处出现误差的非单调性变化。最后通过将数值模拟结果与现有的修正方法进行对比,提出了更为合理的修正方程。     

鳍对拖式吊舱推进器水动力性能的影响

为考察鳍对拖式吊舱推进器水动力性能的影响,用基于速度势的面元法建立了吊舱推进器水动力性能计算的数学模型,对附鳍的吊舱式推进器的定常及非定常水动力性能进行了预报.螺旋桨和吊舱及鳍之间的相互影响通过迭代计算来处理.采用计算较为简便的关于扰动速度势的基本积分微分方程,并采用双曲面形状的面元以消除面元间的缝隙.在桨叶随边满足压力Kutta条件,用Yanagizawa方法求得物体表面的速度分布.计算了无鳍、单鳍和双鳍拖式吊舱推进器的水动力性能,计算结果表明,鳍会产生推力,使得双鳍时整个推进器的水动力性能最好,单鳍次之,无鳍最低.