二元翼型跨音速非定常测压实验研究

本文描述了在南航ＮＨ－１风洞中,对ＮＡＣＡ００１２翼型绕其１／４弦长处轴作俯仰正弦振动时,跨音速非定常压力测量的实验。实验目的在于研究在跨音速风洞中二元翼型非定常压力实验中的技术问题,包括实验装置的设计,数据采集和处理等,并初步研究了Ｍ数、攻角、振幅等参数对非定常压力分布的影响。     

热式流量传感器辨识与数字补偿方法

本文就改善热式流量传感器的响应特性问题进行了理论与实验研究,指出了模拟电路补偿方法所存在的不足,论述了热式流量传感器的辨识与实验方法,提出了用数字补偿提高其响应速度的方法。研究表明,这种方法是很有效的。     

Due‐window assignment with unit processing‐time jobs

In due‐window assignment problems, jobs completed within a designated time interval are regarded as being on time, whereas early and tardy jobs are penalized. The objective is to determine the location and size of the due‐window, as well as the job schedule. We address a common due‐window assignment problem on parallel identical machines with unit processing time jobs. We show that the number of candidate values for the optimal due‐window starting time and for the optimal due‐window completion time are bounded by 2. We also prove that the starting time of the first job on each of the machines is either 0 or 1, thus introducing a fairly simple, constant‐time solution for the problem. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

激励器结构参数对合成射流影响的试验研究

为了设计高性能的合成射流激励器,实验采用热线风速仪测量激励器出口的流动速度,对不同大小激励器、不同出口形状激励器、单 双膜激励器以及金属振动膜处于不同装配受压状态下的激励器分别进行了试验。实验结果显示:激励器的结构决定了合成射流激励器的性能;激励器出口射流平均速度除了与激励器大小、出口面积有关外,还与出口形状有关,采用方孔 矩形孔形式的开口有利于建立较强的合成射流;双膜与单膜工作相比,合成射流最大速度基本上是成两倍关系;金属振动膜的安装形式(受压状态)不影响合成射流随频率的变化规律,但对合成射流速度影响很大,当激励器振动膜处于螺栓拧紧受压状态时,与振动膜不受压状态相比,合成射流出口速度几乎下降了一个数量级。     

数组越界软件测试系统的设计与实现

软件测试系统的研制是现阶段软件测试领域研究的一个热点.首先针对C/C 语言常见数组越界错误类型进行了分析,介绍了软件测试的一些基本概念,而后给出了软件测试系统设计,对系统设计的各个阶段进行了说明,并且给出了一种错误类型检查的算法设计,它在软件测试检测中具有通用性和代表性,最后给出了软件测试的实验结果.     

Appointment scheduling at a multidisciplinary outpatient clinic using stochastic programming

The purpose of this paper is to investigate the problem of constructing an appointment template for scheduling patients at a specific type of multidisciplinary outpatient clinic called an integrated practice unit (IPU). The focus is on developing and solving a stochastic optimization model for a back pain IPU in the face of random arrivals, an uncertain patient mix, and variable service times. The deterministic version of the problem is modeled as a mixed integer program with the objective of minimizing a weighted combination of clinic closing time (duration) and total patient waiting time (length of stay). A two‐stage stochastic program is then derived to account for the randomness and the sequential nature of the decisions. Although it was not possible to solve the two‐stage problem for even a limited number of scenarios, the wait‐and‐see (WS) problem was sufficiently tractable to provide a lower bound on the stochastic solution. The introduction of valid inequalities, limiting indices, and the use of special ordered sets helped to speed up the computations. A greedy heuristic was also developed to obtain solutions much more quickly. Out of practical considerations, it was necessary to develop appointment templates with time slots at fixed intervals, which are not available from the WS solution. The first to be derived was the expected value (EV) template that is used to find the expected value of the EV solution (EEV). This solution provides an upper bound on the objective function value of the two‐stage stochastic program. The average gap between the EEV and WS solutions was 18%. Results from extensive computational testing are presented for the EV template and for our adaptation of three other templates found in the literature. Depending on the relative importance of the two objective function metrics, the results demonstrate the trade‐off that exists between them. For the templates investigated, the “closing time” ranged from an average of 235 to 275 minutes for a 300‐minute session, while the corresponding “total patient time in clinic” ranged from 80 to 71 minutes.     

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

This paper studies the four-engine liquid rocket flow field during the launching phase. Using three-dimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model, an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors, including wedge-shaped flame deflector and cone-shaped flame deflector, are calcu-lated. The finite-rate chemical kinetics is used to track chemical reactions. The simulation results show that afterburning mainly occurs in the mixed layer. And the region of peak pressure occurs directly under the rocket nozzle, which is the result of the direct impact of exhaust plume. Compared with the wedge-shaped flame deflector, the cone-shaped flame deflector has great performance on guiding exhaust gas. The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction, respectively. The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2% and 9.9% higher than those for the cone-shaped flame deflector. The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.     

Numerical research on adverse effect of muzzle flow formed by muzzle brake considering secondary combustion

The simulation of the artillery interior and intermediate ballistics problem is performed to investigate the influence of a gas dynamics device, muzzle brake, on the muzzle hazard phenomena, such as flash and blast waves. The correlation of the chemical reactions with the characteristics of the muzzle flow field is analyzed by the simulation for a further understanding of the secondary combustion phenom-enon of the muzzle flow. The novel structure of muzzle flow caused by the muzzle brake is presented by the simultaneous solution of the interior ballistics model and multi-species Navier-Stokes equations in order to analyze the influence of the muzzle brake structure on the chemical reactions. The secondary combustion of the muzzle flow due to the oxygen-supplement chemical reactions is obtained by the chemical reaction kinetic model. The interaction of the blast waves released from the muzzle brake is illustrated in detail and the mechanism of the formation of muzzle flash is analyzed. This research provides a reference for the studies on the suppression of the muzzle flash.     

Disruption management in production planning

We study the problem of recovering a production plan after a disruption, where the disruption may be caused by incidents such as power failure, market change, machine breakdown, supply shortage, worker no‐show, and others. The new recovery plan we seek after has to not only suit the changed environment brought about by the disruption, but also be close to the initial plan so as not to cause too much customer unsatisfaction or inconvenience for current‐stage and downstream operations. For the general‐cost case, we propose a dynamic programming method for the problem. For the convex‐cost case, a general problem which involves both cost and demand disruptions can be solved by considering the cost disruption first and then the demand disruption. We find that a pure demand disruption is easy to handle; and for a pure cost disruption, we propose a greedy method which is provably efficient. Our computational studies also reveal insights that will be helpful to managing disruptions in production planning. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

基于引擎成员的仿真调度问题

仿真引擎作为仿真系统的核心,是HLA仿真联邦中的特殊联邦成员。论述了基于实体、成员和引擎的层次式仿真调度概念结构,及其采用的基于时间序和事件序的仿真调度方案,将作战实体的时间推进和交战处理都归入仿真引擎,确保了全局时间统一性、实体同步性和交战事件的有序性,而且各种参量的设置灵活,便于控制。介绍了仿真引擎成员的设计与实现。该引擎成员在某指挥自动化作战效能仿真与评估系统中得以应用。