坦克外壳对内部电磁波的影响及其振荡干扰波型的数值计算

在坦克的金属立方体盒子模型下,分析了坦克外壳对内部电磁波的影响,并对Lc型电路激发的电磁波在坦克内部形成的振荡波型进行了计算,分析了该类电磁振荡波对坦克内部其他电子元件产生电磁干扰的作用机理,对一种最低频率的谐振波型进行了仿真模拟,提供了对坦克内部电磁波电场分量及磁场分量的一种分析计算方法,为研究坦克内部电子设备的电磁干扰规律提供了思路,对提高坦克的电磁兼容性能具有一定参考意义。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

Experiment and simulation of launching process of a small-diameter steel cartridge case

In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber pressures. The pressure curves of cartridge chamber are measured in experiment, and the tensile test data of cartridge are loaded into the numerical calculation to compare with the experimental data. The conclusion was obtained that the calculated results match better with the experimental results by considering strain rate bilinear kinematic hardening material constitutive model. The forces on the various parts of the cartridge during launching and their deformation rules are achieved, in which the equivalent plastic strain decreases and the cylinder ring withstands the maximum equivalent stress when the cartridge case clings to the bore from the mouth to the bottom.     

On the continued acceleration of bomb casing fragments following casing fracture

It has been said that, once a bomb casing has fractured, “detonation gases will then stream around the fragments or bypass them, and the acceleration process stops there.” However, while apparently copious gas flow through casing fractures indicates some pressure release, it is also an indication of significant gas drive pressure, post casing fracture. This paper shows two approaches to the problem of calculating the actual loss of drive. One presents first-order analytical calculations, in cylindrical geometry, of pressure loss to the inside surface of a fractured casing. The second shows the modelling of a selected example in the CTH code. Both approaches reveal that gas escape, while occurring at its own sound-speed relative to the adjacent casing fragments, has to compete with rapid radial expansion of the casing. Together with some historic experiments now publicly available, our calculations indicate that post-fracture casing fragment acceleration is, for most systems, unlikely to be reduced significantly.     

浅析储油罐安全容量的确定计算

由于油料具有热膨胀性,在运输和储存期间,如果油罐装油超过安全容量,当温度升高时,罐内油料体积膨胀,就可能导致溢油事故的发生,不仅造成油料数量的损失,甚至会引发火灾事故。正确确定不同油罐的安全容量,对油料的安全具有重要意义。文章阐述了油罐安全容量的概念,分析了安全容量计算不准确可能造成的危害,提出了油罐安全容量的计算方法。     

外弹道数据融合实时算法研究

信息融合技术可以大大减轻指挥决策的工作量,增加信息置信度,减少模糊性,改善系统可靠性.针对靶场实时测控数据处理中急待解决的成片野值干扰等难题,在实时环境中采用数据融合处理方法,讨论了外弹道数据融合实时算法所面临的关键技术,并通过分析与论证得出可行性结论.结论对进一步的系统设计与软件实现具有指导意义.     

综合消磁过程中工作线圈安匝数的估算方法

提出应以满足船壳退磁要求来确定交变磁场的最大振幅,研究了船壳内的磁场与外加磁场的关系,给出了工作线圈总安匝数的计算公式,讨论了如何分配“安”与“匝”等问题．     

反舰导弹纯方位发射捕捉概率计算方法

反舰导弹的纯方位发射对目标信息要求不高,在目标信息的探测越来越艰难的今天,是反舰导弹较为重要的一种发射方式,也将会成为未来海战场上常用的作战方式.介绍了反舰导弹捕捉概率的计算方法和传统纯方位发射的捕捉概率的计算方法,并从分析反舰导弹捕捉概率的计算模型和影响因素出发,指出传统的反舰导弹纯方位发射的捕捉概率计算模型存在不足,并给出了修正后的计算模型.