基于公理设计理论的某自行炮弹仓结构分析

公理设计在设计过程中提供一种描述设计目标的框架,设计者以这一框架作向导进行产品设计,使设计过程形式化,设计决策易于理解,并对设计的预期质量进行评价;应用公理设计方法对某自行炮全自动弹仓结构进行了分析,并提出了一种基于公理设计理论的某自行炮弹仓部件设计顺序。     

基于TCP协议的远程控制系统网络时延仿真研究

为了能够在同一网络环境下对远程控制系统进行研究,使用结构数组对网络时延进行了仿真。将数据报的信息存放在与其网络时延相对应的结构数组元素中,在每个采样点系统只使用结构数组相应元素中的信息,实现对网络时延的仿真。在基于时间驱动工作方式的控制系统中,可以采用这样的方法进行网络时延仿真。     

指挥机构人员等级结构评估方法

指挥机构是战争中的头脑,结构优化、职责分明、衔接紧密是指挥机构首要的要求.为了使指挥机构在等级调整中仍然保持相对的稳定,确定合适的进入机构系统的人员比例,是需要解决的问题.依据机构人员级别调整运行的普遍规律,对进出机构系统的人员等级结构进行建模,分析机构人员等级结构达到稳定的条件,运用递推的方法,求得在稳定的条件下应调入机构的各个等级人员比例,并按达到稳定结构的顺序对机构进行评估.     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

Influence of a liquid-filled compartment structure on the incoming shaped charge jet stability

Liquid-filled compartment structure consists of a bulk steel plate with matrix blind holes which are filled with liquid and a steel front plate to seal up the liquid with rings and bolts.The liquid-filled compart-ment structure can resist the shaped charge warhead effectively.This paper presents experimental and theoretical investigations of the penetration ability of the residual shaped charge jet emerging from the liquid-filled compartment structure after the penetration process at different impact angles.On the basis of shock wave propagation theory,the influence of the liquid-filled compartment structure on jet sta-bility is analysed.The interferences of the liquid backflow caused by a reflected shock wave and a back plate on jet stability under different impact angles are also examined.In addition,the range of the disturbed velocity segments of the jet at different impact angles and the penetration ability of the re-sidual jet are obtained.A theoretical model is validated against the experimental penetration depths.     

深水环境下潜艇舯部结构撞击强度数值分析

潜艇结构水下碰撞是潜艇的主要事故形式,也是船舶碰撞最为危险的状态之一。文中首先提出潜艇碰撞问题,对碰撞特征进行分析,然后针对某型潜艇舯部典型结构的撞击极限强度特性进行数值计算,结果显示,由于准静压载荷的附连耦合作用,随着静水压力的增加,潜艇舯部耐压壳体结构的防撞能力将大幅下降,而耐压壳体内部平台和舱壁结构将有效提高壳体结构的横向失稳临界应力,改善潜艇结构的径向耐撞能力。     

基于高层滑模的导弹电液伺服机构模糊滑模控制

针对导弹电液伺服机构的跟踪控制问题,设计了一种模糊滑模控制方案。将高层滑模函数作为模糊控制系统的一维输入,简化了一般模糊滑模控制系统结构,从而得到具有少量规则的模糊滑模的设计方案。仿真结果表明了该方案可以减小跟踪误差,增强系统的鲁棒性和削弱控制信号中的高频抖振。     

Optimal joint preventive maintenance and production policies

We study joint preventive maintenance (PM) and production policies for an unreliable production‐inventory system in which maintenance/repair times are non‐negligible and stochastic. A joint policy decides (a) whether or not to perform PM and (b) if PM is not performed, then how much to produce. We consider a discrete‐time system, formulating the problem as a Markov decision process (MDP) model. The focus of the work is on the structural properties of optimal joint policies, given the system state comprised of the system's age and the inventory level. Although our analysis indicates that the structure of optimal joint policies is very complex in general, we are able to characterize several properties regarding PM and production, including optimal production/maintenance actions under backlogging and high inventory levels, and conditions under which the PM portion of the joint policy has a control‐limit structure. In further special cases, such as when PM set‐up costs are negligible compared to PM times, we are able to establish some additional structural properties. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

我国钢结构耐火设计方法评述

分析并指出了我国现行钢结构耐火设计方法的缺点,建议采用性能化设计方法以提高钢结构耐火设计的可靠度。     

SCB型钢结构防火涂料热分解动力学模型研究

用热重法(TG)对SCB型钢结构防火涂料的热分解过程进行了分析,并用微分法中的Achar法对热分解的数据进行处理,用多种机理方程进行了拟合,发现SCB型防火涂料的热分解可分为四个阶段:第一阶段热分解属于随机核化,第二、第三、第四阶段热分解属于三维扩散,球形对称机理。