C3I系统评价可信性分析方法

C3I系统评价结果的可信性分析是C3I系统理论研究中的一个重要问题.首先论述了C3I系统评价结果可信性分析的主要内容,然后提出了一种定性分析的主观确认法和定量分析的统计检验法相结合的可信性分析方法,并给出了系统评价结果的可信度的计算方法.     

低频UWBSAR辐射校准模型

低频超宽带合成孔径雷达(Ultra Wide Band Synthetic Aperture Radar,UWBSAR)的辐射校准是系统研制和应用过程中必须面对的课题。低频UWBSAR的特点使得常规SAR辐射校准技术不再适用。充分考虑校准参数随频率和方位角的变化,给出适合该系统的辐射校准方法,得到低频UWBSAR图像辐射校准模型。利用该模型,对系统辐射校准误差进行了分析。     

非局部弹性杆固有频率的Ritz法求解

采用Ritz法求解了非局部弹性直杆的固有频率问题。非局部弹性理论与经典弹性理论相对应,区别在于非局部理论中,一点的应力与该点以及其周围区域的应变都有关,并采用核函数来表征这种相关性。基于Eringen提出的非局部弹性模型,针对三种给定核函数,用Ritz法进行了直杆的动力学分析。并针对两种边界条件给出直杆的固有频率,与其它方法比较,该方法具有可以针对多种核函数求解,精度可控,易于编程等优点。     

美军作战试验与鉴定发展研究

当前,军队装备试验鉴定正由性能试验向作战试验、在役考核全领域拓展。在装备试验鉴定体系全面重塑的历史背景下,为适应军队装备试验鉴定发展新变化,探索装备试验鉴定新理论,推进装备试验鉴定自主创新发展,亟需开展装备试验鉴定技术研究。美军相对较早开展了装备试验与鉴定工作,在作战试验与鉴定工作方面已形成了较完善的法规制度体系和规范的操作流程,有较成熟的理论与方法成果可供借鉴。与此同时,美军作战试验与鉴定工作也面临许多新问题。本文剖析了美军作战试验与鉴定的内涵和管理模式,研究了2018和2019年美军作战试验与鉴定的重点技术领域,并进行了对比分析,以期掌握近期美军作战试验与鉴定工作的发展变化。     

美国陆军网络装备作战评估及启示

作战试验能有效地推动装备体系的建设发展,本文通过分析美国陆军网络集成评估与联合作战评估的作战试验特点,提出军队开展装备作战试验的几个建议。首先,总结了美国陆军网络集成评估到联合作战评估的发展演变,主要包括网络集成评估的地位和作用、网络集成评估的实施流程以及13次网络集成评估和3次作战评估的有关情况;其次,分析了网络集成评估的一系列作战试验特点,诸如实际作战需求牵引、逼真场景构建、试训一体化模式、部队战斗力的直接生成以及作战能力的军民融合式发展等;最后,提出了网络集成评估带来的若干启示,从满足实战能力需求开展作战试验、突出装备体系的互操作能力评估、探索试训结合的作战试验模式、组建专门的作战试验部队及鼓励工业部门参与作战试验等方面推动军队作战试验的发展。     

Experimental study on the detonation process of a pulse detonation engine with ionized seeds

An experimental platform of a pulse detonation engine (PDE) was established to study the effect of different K₂CO₃ ionized seed mass contents on the detonation process. The pressure and ion concentration were detected in the detonation process of the PDE with different contents of ionized seeds. The initiation process of the PDE at different ignition frequencies was studied. The results show that the gas conductivity in the detonation process increased by adding ionized seeds to the PDE tube, and the conductivity increased with the increase in ionized seed mass content. With the increase in ionized seed mass content, the range of the conductivity decreased. The PDE was successfully ignited and formed a stable detonation wave at ignition frequencies of 5 Hz and 10 Hz, and the peak pressure of the stable detonation with the ignition frequency of 5 Hz was 17% higher than that with an ignition frequency of 10 Hz. The detonation wave intensity was weakened and degenerated to a shock wave that propagated in the tube without the fuel filled at the ignition frequency of 20 Hz.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

【专栏】飞机结构静强度应变现场测试手段展望

目前飞机结构静强度应变现场主要的测试手段为使用电阻应变计测量系统,但电阻应变计测量系统存在抗电磁干扰差、引线过多以及一致性难以保证等问题,测试效果难以保证。近年来,光纤传感以及非接触光学测量手段的迅速发展,为飞机结构静强度应变现场测试提供了多种选择。本文通过分析以数字图像相关法技术为代表的新技术的特点,如通过进行非接触操作消除安装过程中所带来的分散性误差以及不确定性,在应对某些需要定性分析的飞机静强度试验场合时可以实时给出三维应变和位移场数据,使测量技术更加直观,以及可溯源性更好、更容易保证计量特性的稳定等,对未来飞机结构静强度应变现场测试手段进行了展望,以期为相关部门和机构提供参考。     

Sensor radiation interception risk control in target tracking

This paper is mainly on the problem of radiation interception risk control in sensor network for target tracking. Firstly, the sensor radiation interception risk is defined as the product of the interception probability and the cost caused by the interception. Secondly, the radiation interception probability model and cost model are established, based on which the calculation method of interception risk can be obtained. Thirdly, a sensor scheduling model of radiation risk control is established, taking the minimum interception risk as the objective function. Then the Hungarian algorithm is proposed to obtain sensor scheduling scheme. Finally, simulation experiments are mad to prove the effectiveness of the methods proposed in this paper, which shows that compared with the sensor radiation interception probability control method, the interception risk control method can keep the sensor scheduling scheme in low risk as well as protect sensors of importance in the sensor network.     

区块链在分队战术协同中的应用构想

从战术分队角度出发,探讨了区块链技术在作战实体之间的信息交互及智能协同方面的应用设想,分析了战术分队信息交互的相关技术及面临的挑战,阐述了区块链在未来战术分队指挥体系构建中的发展构想。