对成像雷达的脉冲分段排序转发干扰

多假目标图像欺骗是目前宽带雷达干扰的难点。针对宽带雷达中常用的线性调频(Linear Frequency Modulated,LFM)信号,提出一种脉冲分段排序转发干扰方法。结合散射波信号模型,推导了合成干扰信号二维成像输出形式,讨论了假目标图像个数、分辨率与分段数以及转发次序之间的关系,并进行了仿真实验。结果表明该干扰方法可较便捷地产生多个沿距离向分布的假目标图像。结果对于成像雷达图像欺骗干扰具有理论指导意义。     

Assessing the value of demand sharing in supply chains

We consider the problem of assessing the value of demand sharing in a multistage supply chain in which the retailer observes stationary autoregressive moving average demand with Gaussian white noise (shocks). Similar to previous research, we assume each supply chain player constructs its best linear forecast of the leadtime demand and uses it to determine the order quantity via a periodic review myopic order‐up‐to policy. We demonstrate how a typical supply chain player can determine the extent of its available information in the presence of demand sharing by studying the properties of the moving average polynomials of adjacent supply chain players. The retailer's demand is driven by the random shocks appearing in the autoregressive moving average representation for its demand. Under the assumptions we will make in this article, to the retailer, knowing the shock information is equivalent to knowing the demand process (assuming that the model parameters are also known). Thus (in the event of sharing) the retailer's demand sequence and shock sequence would contain the same information to the retailer's supplier. We will show that, once we consider the dynamics of demand propagation further up the chain, it may be that a player's demand and shock sequences will contain different levels of information for an upstream player. Hence, we study how a player can determine its available information under demand sharing, and use this information to forecast leadtime demand. We characterize the value of demand sharing for a typical supply chain player. Furthermore, we show conditions under which (i) it is equivalent to no sharing, (ii) it is equivalent to full information shock sharing, and (iii) it is intermediate in value to the two previously described arrangements. Although it follows from existing literature that demand sharing is equivalent to full information shock sharing between a retailer and supplier, we demonstrate and characterize when this result does not generalize to upstream supply chain players. We then show that demand propagates through a supply chain where any player may share nothing, its demand, or its full information shocks (FIS) with an adjacent upstream player as quasi‐ARMA in—quasi‐ARMA out. We also provide a convenient form for the propagation of demand in a supply chain that will lend itself to future research applications. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 515–531, 2014     

舰炮火控雷达实测误差时序特性分析建模

针对舰炮火控雷达高精度实时仿真建模的问题,运用高斯分布和正态平稳过程的两种误差序列生成方法,建立火控雷达简化仿真模型。通过对某火控雷达实测数据误差的统计及时序相关性分析,完成误差序列仿真生成与验证,给出了实现舰炮火控雷达探测误差仿真的优选方法。实践证明,正态平稳模型的误差生成方法可以有效满足新型舰炮仿真试验火控雷达建模要求。     

防空预警监视雷达系统的发展与对策

文章以美“空海一体战”理论的提出为背景,深刻分析了新战略背景下我防空预警监视雷达系统所面临的现实威胁和挑战,结合我军防空预警监视雷达系统现状,对该系统的建设发展问题进行了多方位分析和研究,指出朝着基于系统构成优化、作战运用优化以及信息高效融合的一体化方向发展是我防空预警监视雷达系统在新战略背景下的必然选择.     

舰载预警直升机机载雷达感知环模型研究

依据舰载预警直升机机载雷达的战技性能,从作战使用的角度,提出了机载预警雷达感知环的概念,建立了感知环模型,给出了感知环参数的确定方法。并进行仿真计算,探索了感知环宽度随机载雷达视轴俯角及预警直升机飞行高度的变化规律,为确定满足作战需求的机载雷达最佳视轴俯角和舰载预警直升机最佳飞行高度提供了依据。     

FPGA的车载防撞雷达系统的设计与实现

根据毫米波汽车防撞雷达的研究现状,讨论了一种基于FPGA为实现核心的总体设计方案,并详细分析该系统硬件结构和软件流程,对处理算法在FPGA上的实现提出相应的优化方法,能有效地提高运算效率的同时降低硬件成本.实验结果表明:该方案对前方车辆相关信息探测迅速准确,运行稳定可靠,能够满足汽车防撞雷达的实时性需求.     

基于广义模糊函数的MIMO SAR分辨特性分析

多发多收合成孔径雷达（MIMO SAR）是近年来发展起来的一种新型雷达体制。与传统SAR相比,MIMO SAR综合利用了波形分集和空间分集优势,如何衡量系统的分辨特性以及模糊特性成为亟待解决的问题。本文将模糊函数概念推广到MIMO SAR性能分析中,通过数学推导获得了广义模糊函数的解析表示,结果表明MIMO SAR系统分辨率不仅取决于发射波形参数以及合成孔径长度,还与发射波形集的正交性以及收发天线阵列流形密切相关,仿真实验验证了系统模型的有效性和相应分析的正确性。     

监视雷达低仰角测角方法分析与工程实现

监视雷达天线孔径较小、垂直波束较宽,当雷达天线低仰角探测目标时,波束打地严重,测量易受多路径影响,仰角测量精度难以满足要求.先对现代雷达常用的和差比幅与比相两种测角方法进行了分析,然后以相控阵天线为例,对两者在低仰角下的测向精度进行了仿真和深入分析.最后结合两种方法的优缺点,对某Ⅰ型监视雷达样机进行改进,使其满足比幅比相混合型测角的条件,并对改进后的样机作动态对比试验,再次证明两种常用测角算法在低仰角下的优劣,为工程应用提供参考.     

基于非合作雷达辐射源的无源雷达目标检测方法

主要研究了基于非合作雷达辐射源的非相参体制无源雷达目标检测问题。对目标回波通道中的直达波干扰,利用一种基于三元传感器对消的方法来进行抑制。然后采用周期间相关检测的处理方法对目标进行检测。仿真分析表明,该方法在辐射源信号未知的情况下,能够有效抑制目标回波通道中的直达波干扰,得到优于传统的确知信号的相关检测性能。     

基于改进动态规划的雷达弱小目标检测与跟踪

针对复杂背景下雷达弱小目标的检测和跟踪问题,提出了一种改进动态规划的检测前跟踪算法.该方法用多级检验判决方法代替常用的两级门限检测,并用传统跟踪技术进行目标位置状态估计,根据估计值与状态值的欧氏距离设计一个惩罚项来改进值函数.通过仿真验证,结果表明该方法能有效消除伪航迹,减小计算量,提高对雷达弱小目标的检测和跟踪性能.