Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

An artificial neural network (ANN) constitutive model is developed for high strength armor steel tempered at 500 °C, 600 °C and 650 °C based on high strain rate data generated from split Hopkinson pressure bar (SHPB) experiments. A new neural network configuration consisting of both training and validation is effectively employed to predict flow stress. Tempering temperature, strain rate and strain are considered as inputs, whereas flow stress is taken as output of the neural network. A comparative study on Johnson–Cook (J–C) model and neural network model is performed. It was observed that the developed neural network model could predict flow stress under various strain rates and tempering temperatures. The experimental stress–strain data obtained from high strain rate compression tests using SHPB, over a range of tempering temperatures (500–650 °C), strains (0.05–0.2) and strain rates (1000–5500/s) are employed to formulate J–C model to predict the high strain rate deformation behavior of high strength armor steels. The J-C model and the back-propagation ANN model were developed to predict the high strain rate deformation behavior of high strength armor steel and their predictability is evaluated in terms of correlation coefficient (R) and average absolute relative error (AARE). R and AARE for the J–C model are found to be 0.7461 and 27.624%, respectively, while R and AARE for the ANN model are 0.9995 and 2.58%, respectively. It was observed that the predictions by ANN model are in consistence with the experimental data for all tempering temperatures.     

云模型在雷达干扰资源多目标优化配置中的应用

鉴于干扰效果/效益评估在雷达干扰资源优化分配中的重要地位,提出了一种基于云模型和匈牙利算法的雷达干扰资源优化分配模型。利用一维云模型单条件单规则发生器和逆向云发生器构建了评估指标干扰效果推理器,利用基于风险态度因子的云模型映射函数定义了云模型之间距离的度量方法。提出了一种基于云模型与逼近理想解法的雷达干扰效益矩阵求解方法,最后运用匈牙利算法实现了干扰资源优化分配。将所建模型应用到干扰资源分配中,结果表明该模型能够较好的处理评估中的不确定性知识,是合理、可行的。     

军校图书馆发挥思想政治教育功能实现途径探析

图书馆是军队院校思想政治教育的重要阵地。分析论证了图书馆在军校思想政治教育中具有的转化功能、强化功能和内化功能,并从强化阵地意识、注重阅读引导、提高服务水平、营造环境氛围四个方面,就如何发挥军校图书馆在思想政治教育中的功能作用进行了探讨。     

基于概率图模型的海上多目标跟踪

针对海上复杂环境中多运动目标跟踪问题,提出了一种融合概率图模型和粒子滤波的跟踪方法.该方法采用二元马尔可夫随机场构建多目标模型,利用势函数表示其联合概率分布,最后用变差分法和粒子滤波推理后验概率密度.通过二阶回归模型准确构建状态转移方程,以及Mean-Shift迭代加速粒子采样,提高了算法精确度和运行效率.实验表明:该方法能很好地实现海上复杂环境中的多目标实时跟踪.     

考虑地磁场空间梯度的飞行器磁干扰建模与求解方法

首先,在研究飞行器背景磁干扰模型与小信号模型的基础上,分析了地磁梯度沿纬度与高度的变化规律,分析可知由于飞行器的机动,地磁梯度会对测量结果造成影响;然后,考虑地磁梯度因素,对原有小信号模型求解方法进行了改进：飞行器在四个航向上做小角度的机动飞行,将地磁场沿纬度与高度的梯度作为未知量,与飞行器磁干扰模型中的剩磁参数、感磁参数和涡磁参数一起求解;最后,利用实测试验数据进行了验证,结果表明：考虑地磁梯度的影响与不考虑地磁梯度的影响相比,求解的模型参数可以在细节上进一步提高飞行器背景磁干扰的补偿效果。     

微槽结构单点金刚石飞切加工的切削力建模

超精密单点金刚石飞刀切削技术是一种比较新颖的微槽类结构加工方式。在飞切过程中,切削力是切削过程中重要的物理量,对加工后的表面质量、刀具磨损等有着直接影响。提出了一种基于直角微切削理论的动态微槽类结构飞切的力学模型,基于微切削理论,得到了前、后刀面切削力的理论模型。根据飞切的几何运动特征,建立了飞切过程中剪切角的计算模型,并根据单圈飞切实验得到了飞切过程中剪切面的变化规律。为了验证模型的正确性,采用不同切削参数进行了多圈重叠飞切实验,对切削力进行了测量和分析。实验得到的切削力大小和变化规律与理论模型计算得到的基本一致,证明了该切削力模型的有效性。     

不确定数据流多维建模方法*

由于不确定数据流应用的出现,给传统的精确、静态数据环境下的多维建模带来了巨大挑战。针对不确定数据流动态、无限和不确定等特征,提出了一种不确定数据流多维模型。该模型中引入了不确定对象来描述不确定事实元组,并且通过定义时间维度的层次时间窗口,很好地反映了数据流的动态性和无限性,最后还对此多维不确定数据流模型的基本代数操作和分析代数操作进行了形式化定义,为不确定数据流多维查询与分析提供了理论依据。     

基于径向基代理模型的序列优化中自适应再采样策略

针对径向基插值代理模型样本点预测误差为零时无法获得误差函数进行序列再采样优化的问题,将样本点分布约束引入序列再采样过程,利用潜在最优解加速收敛性,提出一种适用于径向基插值代理模型序列优化的再采样策略,该策略兼顾仿真模型的输出响应特性与样本点的空间分布特性。仿真结果表明,使用该在采样策略后,算法寻优效率和精度均优于传统基于代理模型的优化方法,在对最优解进行有效预测的同时,能显著减少原始模型计算次数。     

液压平衡式发射装置自航发射内弹道模型与仿真

基于装备情况,探讨了潜艇液压平衡式发射装置自航发射鱼雷的可行方案,并建立了后端自流补水的自航发射方式的内弹道模型,进行了计算机仿真。通过试验结果描述鱼雷螺旋桨工作特性,分析了自航发射鱼雷出管速度偏低的原因,并提出改进措施。