脉冲防暴水炮非淹没气体射流的RANS和LES模拟

为提高脉冲防暴水炮刺激剂的雾化水平,必须提高射流的出口速度和改善雾化带形状,而这些因素与管内非淹没气体射流的湍流流场息息相关。为准确描述湍流分布和水柱加速过程,对脉冲防暴水炮的非淹没气体射流进行了RANS和LES模拟。结果表示LES模型较RANS的标准k-ε模型能更为精确地描述湍流分布和管内非淹没气体射流速度的各向异性。但两者对于水柱加速过程的描述基本一致,只是由于LES模型的气液参混较为充分,气液速度相差较小,而可能导致两模型气体在喷口膨胀规律的异同。LES模型气液界面复杂,是用于研究管内气液流型的理想方法。该方法为三维模拟打下了较好的基础,所得结果可以作为管外射流研究的初始条件。     

效能指数的机载火控雷达研制费用估算模型

为提高机载电子设备研制、生产费用估算的精度,提高估算模型的应用范围和时间跨度,构建了基于效能指数的机载火控雷达研制费用估算模型。在分析机载电子设备研制费用建模特点的基础上,以军用飞机的机载火控雷达设备为研究对象,探讨了其效能指数的构建方法,建立了基于效能指数的研制费用参数模型,并进行实例分析。结果表明,由于效能指数考虑了众多费用驱动因素,该模型形式简明直观,相对误差较小,为研究机载电子设备的费用估算进行了有益的探索。     

改进的高脉冲重复频率雷达多假设距离估计方法

高脉冲重复频率雷达目标距离估计时面临距离模糊问题,因此必须采取一定方法解距离模糊。现有方法大都需要在每个驻留时间内至少两帧(包括两帧)检测到目标来实现目标距离估计,多假设方法虽然不要求在每个驻留时间内都需至少两帧检测到目标,但是当模糊区间发生变化时会出现目标距离估计错误。针对现有多假设方法的不足,提出改进的多假设方法,通过建立相关波门来判断目标所在的模糊区间是否改变并对目标状态作出修正,实现对模糊区间发生变化时目标距离的正确估计。仿真表明,方法可以不受模糊区间变化的影响,以较高精度实现目标距离估计。     

加权采样的序列蒙特卡罗滤波技术

在处理非线性滤波问题时,常用的几种通过模型近似或计算近似的滤波方法均在某种特定的情况下具有适用性.近年来随着计算机处理能力的快速发展,提出了序列蒙特卡罗滤波方法,因其在处理复杂的非线性和非高斯问题时表现出强大的潜力而引起广泛关注.详述了序列蒙特卡罗滤波算法的基本思想和原理,对其关键技术进行了归纳分析,并指出了该方法亟待解决的一些难点问题.     

基于正则化的多平台多传感器导航定位和探测偏差估计

针对影响舰载雷达探测误差主要为平台导航定位误差和传感器自身探测误差,对这两类误差的影响因素进行了分析,首次综合考虑这两种系统误差,提出了一种基于正则化的多平台导航定位及探测偏差估计方法,利用不同舰艇上传感器对公共目标探测的迭合条件,建立系统误差观测方程,利用LS对两种系统误差同时进行了估计,并在偏差估计中采用正则化估计方法,提高估计结果的稳定性,最后进行了仿真验证,仿真效果验证了算法的有效性,具有较高的工程应用价值。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

虚拟电流注入法在线补偿转子位置估算误差

旋转高频注入法能估计永磁同步电机零速和低速时的转子位置,但在转子磁极位置解调过程中滤波器的使用会带来较大估算误差。提出虚拟电流注入法来在线补偿转子位置误差,基于估算的转速,构造与负序响应电流同频率的虚拟电流,经过与负序电流完全相同的解调,得到的虚拟电流相位与解调前相位的差值补偿估算的转子位置。分析比较了注入旋转电压导致的实际转速波动和正序响应电流引起的估算转速波动对误差补偿效果的影响,并利用低通滤波器来改善补偿效果。仿真和实验验证了所提方法在电机处于不同状态时对转子位置误差补偿的效果。     

高温燃气与不同构型的再生冷却面板对流传热的数值模拟

对高温燃气与带有平行冷却通道的再生冷却面板之间的三维耦合传热开展了数值研究,其中冷却通道内冷却剂为超临界压力煤油,并结合理论分析探讨了冷却面板构型对耦合传热的影响。结果表明:随燃气侧壁厚以及冷却通道宽度和高度的增大,燃气侧壁面温度升高,热流密度降低。研究还发现:冷却通道不同壁面传递给煤油的热量占比几乎不随燃气侧壁厚变化,但随冷却通道宽度和高度的改变而变化。     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

Numerical investigation on cooling performance of filter in a pyrotechnic gas generator

As a key part of the pyrotechnic gas generator,the filter not only removes the particulate matter but also cools the hot gas to a safe level.This paper aims to improve the understanding of the basic heat and flow phenomenon in the gas generator.The pyrotechnic gas generator is modelling by a simplified filter structure with fiber arrays.A finite-volume model of the heat and fluid flow is proposed to simulate the detailed multi-dimensional flow and energy conversion behaviors.Several verification results are in good agreement with data in different references.Simulation results demonstrate that the filter can not only absorb heat from the gas but also cause the high intensity enhancement of the heat transfer.The per-formance difference between inline and staggered arrays is also discussed.The findings of the study put a further prediction tool for the understanding and design of the filter system with fibers.