网络中心战战场精确时间的同步技术

本文阐述网络中心战战场的时间同步技术、精确时间体系结构、双向比对远距离时间同步技术。对各种时间获取技术进行了比较,对GPS定时原理作了较为详细的说明。     

直升机工作特性建模与飞行性能仿真

以涡轮轴发动机工作特性建模为中心,对某系列直升机飞行性能进行仿真研究,力争实现对直升机实施"基于状态的维修"。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法,建立了涡轮轴发动机的数学模型,并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化,得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真,应用结果表明该方法是可信、高效的。     

Numerical simulation of warhead transportation

The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and trans-portations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

Modeling and analysis of vessel casualties resulting from tanker traffic through narrow waterways

In this paper, we present a physics-based stochastic model to investigate vessel casualties resulting from tanker traffic through a narrow waterway. A state-space model is developed to represent the waterway and the location of vessels at a given time. We first determine the distribution of surface current at a given location of the waterway depending on channel geometry, bottom topography, boundary conditions, and the distribution of wind. Then we determine the distribution of the angular drift for a given vessel travelling at a given location of a waterway. Finally, we incorporate the drift probabilities and random arrival of vessels into a Markov chain model. By analyzing the time-dependent and the steady-state probabilities of the Markov chain, we obtain risk measures such as the probability of casualty at a given location and also the expected number of casualties for a given number of vessels arriving per unit time. Analysis of the Markovian model also yields an analytical result that shows that the expected number of casualties is proportional to square of the tanker arrival rate. We present our methodology on an experimental model of a hypothetical narrow waterway. © 1999 John Wiley & Sons, Inc. Naval Reseach Logistics 46: 871–892, 1999     

基于故障树的系统安全风险实时监测方法

当前的安全性分析方法大都属于预先安全性分析方法,即在系统使用前对系统进行安全性分析。但系统的动态特性,如组成部件工作状态的动态变化,使系统的安全性呈现实时变化。为研究系统的实时安全风险,提出了一种基于故障树的实时安全风险监测方法。该方法用故障树表示系统结构,建立系统安全风险评估模型,根据系统的技术状态参数与系统组件工作状态的对应关系,实时对系统的安全风险进行监测;并根据安全风险监测的情况,对安全风险变化原因做出解释,做到防患于未然。用一个具有前馈控制冷却系统的例子演示了该方法的有效性。     

国外先进战斗机电子对抗系统的发展

首先介绍国外F-22和F-35为代表的先进战斗机的电子战系统和其他欧洲先进战斗机的电子战系统等发展情况。对未来战斗机电子战系统的综合特点和基本功能进行了比较详细的分析和描述,最后叙述了未来战斗机的航空电子系统将设计成为一体化共平台,电子战系统与一体化的航空电子系统融合成为一个功能系统,并描述了这种先进的电子战系统的作战能力。     

Markovian approximation for manufacturing systems of unreliable machines in tandem

This paper studies production planning of manufacturing systems of unreliable machines in tandem. The manufacturing system considered here produces one type of product. The demand is assumed to be a Poisson process and the processing time for one unit of product in each machine is exponentially distributed. A broken machine is subject to a sequence of repairing processes. The up time and the repairing time in each phase are assumed to be exponentially distributed. We study the manufacturing system by considering each machine as an individual system with stochastic supply and demand. The Markov Modulated Poisson Process (MMPP) is applied to model the process of supply. Numerical examples are given to demonstrate the accuracy of the proposed method. We employ (s, S) policy as production control. Fast algorithms are presented to solve the average running costs of the machine system for a given (s, S) policy and hence the approximated optimal (s, S) policy. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 65–78, 2001     

现代战争中电子战装备及作战特点

以科索沃战争为背景 ,叙述了电子装备的使用和战术运用情况 ,并分析了战争中电子战的作战形式及特点 ,指出了应吸取的教训