Numerical investigation on cooling performance of filter in a pyrotechnic gas generator

As a key part of the pyrotechnic gas generator,the filter not only removes the particulate matter but also cools the hot gas to a safe level.This paper aims to improve the understanding of the basic heat and flow phenomenon in the gas generator.The pyrotechnic gas generator is modelling by a simplified filter structure with fiber arrays.A finite-volume model of the heat and fluid flow is proposed to simulate the detailed multi-dimensional flow and energy conversion behaviors.Several verification results are in good agreement with data in different references.Simulation results demonstrate that the filter can not only absorb heat from the gas but also cause the high intensity enhancement of the heat transfer.The per-formance difference between inline and staggered arrays is also discussed.The findings of the study put a further prediction tool for the understanding and design of the filter system with fibers.     

A comprehensive review on material selection for polymer matrix composites subjected to impact load

Polymer matrix composites (PMC) are extensively been used in many engineering applications. Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to their fairly better mechanical properties, low cost, environment friendliness and biodegradability. Selection of appropriate constituents of composites for a particular application is a tedious task for a designer/engineer. Impact loading has emerged as the serious threat for the composites used in structural or secondary structural application and demands the usage of appropriate fiber and matrix combination to enhance the energy absorption and mitigate the failure. The objective of the present review is to explore the composite with various fiber and matrix combination used for impact applications, identify the gap in the literature and suggest the potential naturally available fiber and matrix combination of composites for future work in the field of impact loading. The novelty of the present study lies in exploring the combination of naturally available fiber and matrix combination which can help in better energy absorption and mitigate the failure when subjected to impact loading. In addition, the application of multi attributes decision making (MADM) tools is demonstrated for selection of fiber and matrix materials which can serve as a benchmark study for the researchers in future.     

火灾场钢筋混凝土简支梁抗弯性能分析

通过对火灾中钢筋混凝土简支梁截面温度场和材料热力学性能分析,将混凝土分为弹性区和塑性区来分别计算其强度,建立了火灾场简支梁截面内混凝土应力和梁极限抗弯承载力的计算公式,通过具体算例分析了钢筋混凝土简支梁截面温度场和极限承载力的变化规律和原因。     

裂解温度对PIP制备2D Cf/Si-O-C复合材料结构与性能的影响

以二维碳纤维布、硅树脂先驱体、SiC微粉和乙醇溶剂为原料,采用先驱体转化工艺制备了2D Cf/Si-O-C复合材料,考察了裂解温度对材料结构和性能的影响。结果表明,首周期裂解温度对制备材料的力学性能有重要影响,纤维-基体间的界面弱化是复合材料力学性能提高的主要原因;第6周期采用合适的温度裂解可提高复合材料的力学性能,其弯曲强度和断裂韧性分别达到了263.9MPa和12.8MPa.m1/2。     

Cf/SiC复合材料抗氧化涂层的制备及性能

在氧化性环境中,高于400℃时碳纤维开始氧化,限制了Cf SiC复合材料的应用。通过在Cf SiC复合材料表面制备抗氧化涂层体系,可以有效地保护碳纤维不被氧化。本实验制备了含CVD SiC粘接层、自愈合功能层和CVD SiC抗冲蚀层的三层涂层体系,并进行了氧化失重试验。氧化失重试验结果表明,仅有CVD SiC涂层的试样氧化失重率较大,不能有效地保护材料,而含有自愈合功能层的三层涂层体系的材料试样,在800℃～1200℃的氧化失重率非常小,1000℃下氧化288h的失重率仅为2.3%,弯曲强度仍保持为452.9MPa。同时实验发现,试样在氧化失重试验后,其CVD SiC涂层的表面形貌有明显改变,这主要是由SiC氧化形成SiO2薄膜所致,并且在1200℃下所生成的SiO2薄膜有表面收缩趋势,具有液相膜的部分特征。     

烧结助剂对热压SiCw/Si3N4复合材料性能的影响

本文通过热压的方法分别制得以Ｙ２Ｏ３－Ａｌ２Ｏ３和Ｙ２Ｏ３－Ｌａ２Ｏ３为烧结助剂的ＳｉＣｗ／Ｓｉ３Ｎ４陶瓷基复合材料，对比了采用不同种类及含量的烧结助剂的ＳｉＣｗ／Ｓｉ３Ｎ４复合材料的性能结果，发现烧结助剂的种类及含量对ＳｉＣｗ／Ｓｉ３Ｎ４复合材料的弯曲强度和断裂韧性有明显的影响，对高温弯曲强度的影响尤为显著。     

用B4C陶瓷先驱体涂复碳纤维研究

用溴苯和BF3乙醚为起始原料,合成出聚对亚苯基硼(PPB),高温裂解后得到含B4C 54.4%、B2O2 13.6%、自由碳32%的陶瓷.用溶液浸涂碳纤维(CF)并高温裂解后得到B4C涂层CF,与未涂层CF相比,B4C涂层CF抗热氧化性提高200°C.1800°C热压时B4C涂层CF较未涂层CF制得的CF/SiC复合材料的σb值提高10.5% ,KIC值提高19.4%,1850°C热压时相应的σb值提高31.6%,KIC提高5.8%.     

烧结温度对 Cf/SiC 复合材料界面的影响

系统地研究了烧结温度对Cf/SiC复合材料界面和力学性能的影响.结果表明,烧结温度较低(1700℃)时,由于复合材料的烧结性差,纤维与基体间仅仅为一种机械结合,因此纤维与基体间结合很弱,从而导致复合材料力学性能低.烧结温度提高至1800℃后,由于适量的富碳界面相不仅可避免纤维与基体间的直接结合,而且使纤维与基体间的结合强度适中,因而复合材料具有很好的力学性能.进一步提高烧结温度至1850℃或更高温度时,由于界面相与纤维间的反应加重,纤维本身性能大大降低.同时,纤维与基体间结合强度提高,因此复合材料的力学性能大大降低.     

预氧化聚碳硅烷（PCS）纤维的无机化过程

针对预氧化PCS纤维无机化过程进行了研究 ,探讨了烧成过程中预氧化PCS纤维的投放量及保护气体流量等因素对纤维烧成过程的影响。实验发现烧成过程中产生的小分子气体活性基团阻止链自由基的结合 ,从而对纤维的进一步裂解起促进作用     

聚碳硅烷纤维的空气不熔化反应动力学研究

以高压法聚碳硅烷(Polycarbosilane,PCS)纤维的空气不熔化为例,采用多曲线积分法研究了PCS纤维空气不熔化反应动力学。结果表明,高压法PCS纤维的空气不熔化反应活化能约60~70 kJ/mol。通过研究不同的机理函数的对数与温度倒数的关系,结果表明,PCS纤维空气不熔化过程由随机成核和生长机理(n=3)的表面反应控制,根据该反应机理,同样得到高压法PCS的空气不熔化反应活化能约60~70 kJ/mol,指前因子A约为77.64。