一类高次多项式系统极限环的讨论

通过变换将一类高次多项式系统化为Lienard系统,利用Hopf分枝定理和张芷芬唯一性定理,证明了该类系统极限环的存在性与唯一性。     

火炮射表数据处理计算步骤和程序框图

本文是文献［１—３］的继续,主要研究火炮射表数据处理算法的计算步骤和程序设计框图。这两个内容是正确进行程序设计、分析和使用的重要环节。     

涡轮盘疲劳寿命可靠性设计仿真及优化策略

涡轮盘是航空发动机主要部件之一,一旦发生破坏性故障将导致严重的后果。在充分考虑影响涡轮盘高低周复合疲劳寿命因素不确定性基础上,以MATLAB为平台,设计了涡轮盘高低周复合疲劳寿命可靠性优化设计的联合仿真平台。利用寿命函数和寿命可靠性分析极限状态函数中的共性需求,提出了在优化迭代的过程中自适应构建寿命函数Kriging模型和寿命可靠性极限状态面Kriging模型时共用训练样本点的策略。同时,提出了一种构建寿命函数Kriging模型的学习函数。使用所搭建的疲劳寿命可靠性优化设计平台,完成了某型涡轮盘盘心、榫槽以及涡轮盘系统高低周复合疲劳寿命的可靠性优化设计。结果表明,最优设计方案的局部最大应力显著降低,均值寿命大幅提高,并满足可靠性约束。     

链约束下加工时间恶化的Flow Shop排序问题

讨论作业具有线性加工时间,作业间具有链约束的两台处理机流水作业排序问题,目标函数为极小化完工时间。在作业加工时间简单线性恶化下,提出作业的非负开始和停止延迟恶化率,构造了满足约束条件的复合作业。在此基础上,给出作业间具有平行链约束的两台处理机流水作业排序问题的最优多项式算法。     

参数化滤波器逼近问题的全局最优算法

基于Lipschitz下界估值和分枝定界技术,给出了一维参数化小波滤波器逼近问题的全局最优算法。由于充分利用了滤波器逼近问题的特点,本方法将原来的Lipschitz算法的线性收敛速率提高为二次收敛速率。     

基于气动-弹道一体化模型的飞行器外形优化设计

为提升飞行器气动外形优化设计效果,研究了新型飞行器在大空域、宽速域范围的气动适应性问题,提出一种基于气动-弹道一体化模型的外形优化设计方法.通过考虑气动和弹道的耦合作用,综合利用类型函数/形状函数转换技术、气动工程估算方法和Radau伪谱法,建立飞行器气动-弹道一体化模型.基于该模型,通过明确优化目标和约束条件,给出基...     

复杂海战场环境下AUV全局路径规划方法

针对无人自主水下航行器(Autonomous Underwater Vehicle,AUV)在复杂海战场环境中路径规划时环境模型复杂、约束条件多的情况,建立了包括战场地形、敌方威胁、障碍物和海流场等在内的比较完善的海战场环境模型.以AUV航行时间、威胁时间最短为优化目标,给出了一种基于振荡型入侵野草优化(Invasiv...     

On efficient algorithms for finding efficient salvo policies

We consider the salvo policy problem, in which there are k moments, called salvos, at which we can fire multiple missiles simultaneously at an incoming object. Each salvo is characterized by a probability p_i: the hit probability of a single missile. After each salvo, we can assess whether the incoming object is still active. If it is, we fire the missiles assigned to the next salvo. In the salvo policy problem, the goal is to assign at most n missiles to salvos in order to minimize the expected number of missiles used. We consider three problem versions. In Gould's version, we have to assign all n missiles to salvos. In the Big Bomb version, a cost of B is incurred when all salvo's are unsuccessful. Finally, we consider the Quota version in which the kill probability should exceed some quota Q. We discuss the computational complexity and the approximability of these problem versions. In particular, we show that Gould's version and the Big Bomb version admit pseudopolynomial time exact algorithms and fully polynomial time approximation schemes. We also present an iterative approximation algorithm for the Quota version, and show that a related problem is NP-complete.     

目标宽频带RCS的快速算法研究

目标宽带RCS预估算法一直是计算电磁学的一个研究热点,本文分别研究了渐近波形估计技术（AWE）与最佳一致逼近技术在宽频带RCS预估领域内的应用。首先,介绍了传统矩量法计算RCS的原理,并分析了两种快速算法的计算过程。然后,采用这两种技术,分别计算了简易飞机模型的RCS值,并对这两种方法进行比较。计算结果表明相比传统的矩量法,这两种方法在不影响精度的前提下大大提高了计算效率。同时,相比渐近波形估计技术,最佳一致逼近技术在节省内存,节约时间方面更具优势。最后,采用最佳一致逼近理论,结合电磁计算软件,实现较大尺寸目标的宽频带RCS的计算。     

Single‐machine scheduling with deadlines to minimize the total weighted late work

We consider scheduling a set of jobs with deadlines to minimize the total weighted late work on a single machine, where the late work of a job is the amount of processing of the job that is scheduled after its due date and before its deadline. This is the first study on scheduling with the late work criterion under the deadline restriction. In this paper, we show that (i) the problem is unary NP‐hard even if all the jobs have a unit weight, (ii) the problem is binary NP‐hard and admits a pseudo‐polynomial‐time algorithm and a fully polynomial‐time approximation scheme if all the jobs have a common due date, and (iii) some special cases of the problem are polynomially solvable.