频率选择表面研究与设计

对频率选择表面进行了研究,通过研究不同结构的频率选择表面,在现有介质材料的基础上设计了一种具有带通特性的频率选择表面,并用Ansoft HFSS进行了仿真设计.在20％带宽内实现了垂直照射传输损耗小于-2 dB,并研究了电磁波在不同入射角度下的传输特性.     

Missile systems: “Flexible modularity” and incremental technological change in military production∗

It is often stated that technological change in the military field is characterised by the introduction of radical innovations rather than by incremental processes of technological change. This article illustrates the diversity of military innovation by arguing that technological change in missiles systems is dominated by incremental change. While some large weapons platforms display the design rigidities normally associated with complex systems, missiles are characterised by “flexible modularity”. Flexible modularity facilitates the continuous introduction of upgrades, and makes missile systems amenable to gradual technological change. Besides, it has significant implications for the future role of missile systems, and poses special problems for missile disarmament and technology control initiatives.     

The ‘African COP’

The 17th Conference of the Parties (COP17) had been anticipated as the ‘African COP’, not only due to the African venue but also due to the opportunity it would afford African countries – with South Africa at the helm – to steer the debate on a global climate change regime. With the conference now over, lobby groups, international organisations, negotiators, observers and commentators alike have been taking stock of its outcome. Despite the litany of developmental and security implications of climate change, COP17 got underway with little hope that much might actually be achieved. In light of the discouraging condition of the global economy, with leading developed economies suffering financially, states were hardly in a mood to be making concessions that would impact their fiscal health. Nonetheless, an agreement was reached. Questions remain, however, about the significance of the outcome of the African COP for the world at large, but ultimately also for Africa.     

基于时频信号项的输电塔损伤识别柔度矩阵法

将悬臂结构损伤识别柔度矩阵法和振动时域响应信号时频分析方法相结合,利用柔度矩阵与结构参数间的线性关系,引入突卸荷载激励下振动响应的WVD时频分布信号项幅值向量,通过求解损伤系数方程来识别集中质量型输电塔结构的损伤位置和程度。算例分析表明,所提出的方法通过一次测量就能准确地识别出结构单个或多个损伤的程度,并具有良好的抗噪性。     

污泥龄对污泥絮体中磷酸盐形态及其动态变化的影响

以污泥龄(SRT)为10 d和30 d的2组A/O-SBR反应器活性污泥为研究对象,探讨了SRT对污泥絮体中磷酸盐形态及其动态变化的影响。结果表明,污泥絮体中的磷主要分布于胞外聚合物(EPS),EPS磷占污泥絮体磷总质量的69.45%~73.36%。正磷酸盐(PO3-4-P)、低分子量聚磷酸盐(LMW Poly-P)和高分子量聚磷酸盐(HMW Poly-P)是污泥絮体磷的主要形态。高SRT(30 d)污泥絮体EPS磷含量明显大于中SRT(10 d),表现为前者较后者有更高的PO3-4-P和HMW Poly-P含量,对应着高SRT(30 d)污泥絮体较中SRT(10 d)有更高的磷含量,前者约为后者的1.37倍。厌氧/好氧反应过程中,中SRT(10 d)污泥絮体EPS磷的厌氧降低量和好氧升高量分别为高SRT(30 d)的1.35倍和1.46倍,主要归因于前者的PO3-4-P和HMW Poly-P较后者有更大的厌氧降低量,而PO3-4-P,LMW Poly-P和HMW Poly-P较后者有更大的好氧升高量,对应着中SRT(10 d)污泥絮体较高SRT(30 d)有更强的厌氧释磷和好氧吸磷能力。     

夜间通风量对相变轻质房间室内热环境的影响

运用EnergyPlus软件,对含相变材料层轻质房间的室内热环境进行了模拟,分析了墙体结构、通风量等因素对相变材料轻质墙体的蓄、放热性能和室内热环境的影响。模拟结果表明:相变材料应用于轻质房间,能显著增强围护结构的热惰性,提高室内的热舒适性;同时采取夜间通风技术,可以有效地将白天蓄积的热量散至室外。相变材料布置在围护结构内侧时,室内环境的热舒适性比布置在外侧时更好。从自然通风的角度,相变材料布置于围护结构内侧时,选取换气数2.5次/h作为优化结果;相变材料布置于围护结构外侧时,选取换气数4.0次/h作为优化结果。     

New maximum entropy methods for modeling lifetime distributions

This article introduces two new maximum entropy (ME) methods for modeling the distribution of time to an event. One method is within the classical ME framework and provides characterizations of change point models such as the piecewise exponential distribution. The second method uses the entropy of the equilibrium distribution (ED) for the objective function and provides new characterizations of the exponential, Weibull, Pareto, and uniform distributions. With the same moment constraints, the classical ME and the maximum ED entropy algorithms generate different models for the interarrival time. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 427–434, 2014     

基于竞争式MAC接入的移动Adhoc网络建模与仿真

总结了具有代表性的竞争式MAC接入协议:冲突避免多址接入MACA、IEEE 802.11 DCF和信道获得多址接入FAMA传输介质访问控制接入的一般性规律,建立了一个竞争式MAC接入数学模型,研究哪些因素影响网络通信。通过NS2网络模拟实验,验证了这些影响的存在,并初步了解如何减少这些负面影响。与无线网络物理层或高层网络比起来,MAC接入对于无线网络高效可靠通信的负面影响容易被忽略,实际却存在,该研究对无线网络可靠通信具有一定参考价值。     

Auctions in the post‐change‐order period

A change order is frequently initiated by either the supplier or the buyer, especially when the contract is long‐term or when the contractual design is complex. In response to a change order, the buyer can enter a bargaining process to negotiate a new price. If the bargaining fails, she pays a cancellation fee (or penalty) and opens an auction. We call this process the sequential bargaining‐auction (BA). At the time of bargaining, the buyer is uncertain as to whether the bargained price is set to her advantage; indeed, she might, or might not, obtain a better price in the new auction. To overcome these difficulties, we propose a new change‐order‐handling mechanism by which the buyer has an option to change the contractual supplier after bargaining ends with a bargained price. We call this the option mechanism. By this mechanism, the privilege of selling products or services is transferred to a new supplier if the buyer exercises the option. To exercise the option, the buyer pays a prespecified cash payment, which we call the switch price, to the original supplier. If the option is not exercised, the bargained price remains in effect. When a switch price is proposed by the buyer, the supplier decides whether or not to accept it. If the supplier accepts it, the buyer opens an auction. The option is exercised when there is a winner in the auction. This article shows how, under the option mechanism, the optimal switch price and the optimal reserve price are determined. Compared to the sequential BA, both the buyer and the supplier benefit. Additionally, the option mechanism coordinates the supply chain consisting of the two parties. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 248–265, 2015     

粒子束空间传输影响因素及应对方法

全面分析了初始束流分布、发散度、能散度以及地磁场对粒子束空间传输的影响情况,并针对束流长距离传输的静电扩散和地磁偏转效应进行了数值建模及定量的数值仿真研究。结果表明,对于固定束流能量、流强粒子束,可通过增大初始半径削弱粒子束静电扩散效应达到设计要求;通过背景磁场精确预测,可准确控制束流方向精度。可以看出,研究带电粒子束本身的自洽行为以及与外场的作用,对带电粒子束流的产生、传输特性研究及工程化应用都有重要意义。