零级Taylor级数的增长性

本文定义了单位圆内Taylor级数的型函数,得到了零级Taylor级数增长性方面的两个重要结论。     

辛算法应用于Duffing方程的保结构性

讨论了不受外力的Duffing方程在辛算法和非辛算法作用下,相轨线被保持和破坏的性质。证明了当时间步长充分小时,辛算法可以保持原系统的大部分不变闭曲线,而非辛算法却做不到这一点。     

大口径火炮制退机内腔压力测试技术

从火炮反后座装置的特殊结构及测试技术两方面详细分析、总结了我国几种大口径火炮在内腔压力测试时出现不正常现象的原因,并从传感器的机械度、传感器的封装技术、传感器的绝热处理、传感器的频响和排气工装等几个方面改进内腔压力测试的技术工艺方法,并用改进后的方法对155-2型火炮的内腔压力进行了试验,结果表明其工艺方法可准确地测试出内腔压力曲线,从而解决了多年来火炮后座阻力测试技术中存在的关键问题。     

Ka波段过模慢波结构色散曲线的数值求解

运用场匹配法,结合Ka波段过模慢波结构的实际情况,进行轴对称周期慢波结构色散关系的理论推导,得到了一种快速、准确计算适应Ka波段过模慢波结构的色散特性计算方法。根据推导结果,采用MATLAB程序编程计算了Ka波段过模盘荷波导的色散曲线。将计算得到的色散曲线与成熟的商业软件计算得到的结果进行了对比,两者误差在2%以内,验证了数值算法的可靠性。计算得到的色散曲线可以辅助选取Ka波段微波源的结构参数,对器件设计有一定参考价值。     

中等收入人口定位的收入比区间法

为准确定位中等收入人口,在分析洛伦兹曲线和贫富分界点的基础上,以人口收入占总收入比例来描述中等收入人口。提出了中等收入人口定位的收入比区间法,先利用非线性最小二乘拟合洛伦兹曲线,计算出贫富分界点,然后确定经过两极分化指数修正的中等收入比区间,进而计算中等收入水平及人口,给出了算法步骤。A,B两地区的定位结果表明,用收入比描述中等收入人口符合经济学规律,收入比区间法能有效定位和度量中等收入人口。全国城镇居民中等收入定位结果表明,中等收入人口的比例在下降,收入水平在增加,收入分配的公平性得到了改善。     

Defense spending and economic growth: evidence from China, 1952–2012

This paper examines whether defense expenditures contributed to economic growth in China for the 1952–2012 period. We examine the contribution of defense to economic growth using recently published official data on economic activity, defense, and government expenditures. We employ the Feder-Ram and augmented Solow models of economic growth to explore the defense-growth relationship. The Feder-Ram model appears to poorly explain economic growth in China. The augmented Solow model suggests, however, that a 1% increase in defense expenditures raises the economic growth rate by approximately 0.15–0.19%.     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

Military expenditure,economic growth and structural instability: a case study of South Africa

This paper contributes to the growing literature on the milex-growth nexus, by providing a case study of South Africa and considering the possibility of structural breaks by applying newly developed econometric methods. Using full sample bootstrap Granger non-causality tests, no Granger causal link is found between military expenditure and GDP for 1951–2010, but parameter instability tests show the estimated VARs to be unstable. Using a bootstrap rolling window estimation procedure, however, finds evidence of bidirectional Granger causality in various subsamples. This implies standard Granger non-causality tests, which neither account for structural breaks nor time variation may be invalid.     

Does Military Spending Really Matter for Economic Growth in China and G7 Countries: The Roles of Dependency and Heterogeneity

This study revisits the causal linkages between military spending and economic growth in China and G7 countries (i.e. Canada, France, Germany, Italy, Japan, the UK, and the USA) by focusing country-specific analysis for the period 1988–2010. The panel causality analysis, which accounts for both cross-country dependency and heterogeneity across countries, is employed in this study. Our results find evidence of the neutrality hypothesis for Italy, France, and Germany, the military spending–growth detriment hypothesis for both Canada and the UK, and one-way Granger causality running from economic growth to military spending for China. Furthermore, we find a feedback between military spending and economic growth in both Japan and the USA. Thus, our results do not support that one size fits all.