网络空间攻防技术发展动向分析

网络空间攻防技术对国家安全影响的地位日趋上升,已成为世界主要国家超前布局、优先发展的重要技术领域。文章系统梳理了主要国家在态势感知技术、攻击技术、防御技术、控制技术、支援保障技术等领域所取得重要进展和面临的问题,重点分析和前瞻了网络空间攻防技术发展的新趋势和新途径。     

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s⁻¹ is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s⁻¹, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the corresponding strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Markovian approximation for manufacturing systems of unreliable machines in tandem

This paper studies production planning of manufacturing systems of unreliable machines in tandem. The manufacturing system considered here produces one type of product. The demand is assumed to be a Poisson process and the processing time for one unit of product in each machine is exponentially distributed. A broken machine is subject to a sequence of repairing processes. The up time and the repairing time in each phase are assumed to be exponentially distributed. We study the manufacturing system by considering each machine as an individual system with stochastic supply and demand. The Markov Modulated Poisson Process (MMPP) is applied to model the process of supply. Numerical examples are given to demonstrate the accuracy of the proposed method. We employ (s, S) policy as production control. Fast algorithms are presented to solve the average running costs of the machine system for a given (s, S) policy and hence the approximated optimal (s, S) policy. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 65–78, 2001     

舰载装备系统效费权衡分析

借助于趋势分析法进行效费权衡 ,分析了装备系统效能和费用随性能指标变化的发展趋势 ,确定了性能指标的变化对效能与费用的影响大小 ,进而可为装备的研制发展提供有价值的权衡依据 .     

在柴油机放热曲线计算中两个关键问题的解决方法

对影响柴油机放热曲线精度计算的因素进行了讨论 ,并对影响放热率计算的主要问题如动态上止点修正、示功图光顺处理两个主要环节进行了分析研究 ,提出了解决方法 .     

论开发西北地区资源环境与兵团应采取的对策

西北作为资源开发主导型地区 ,矿产资源和水资源在开发利用过程中 ,存在一系列问题。兵团在新疆具有举足轻重的地位 ,应该协调该地区资源开发与环境保护 ,在可持续发展道路中采取相应的对策。     

用像素模拟仿真法计算子母弹头的毁伤效率

介绍了像素模拟仿真法的基本原理 ,给出了用该方法计算子母弹头对点、线、面目标毁伤效率的计算方法以及对典型目标机场跑道封锁效率的计算方法 ,并对实际工程中像素点的选取进行了研究 ;此外 ,提出了新颖的“探雷器”法 ,有效地解决了其它计算方法繁琐费时的弊端 ,从而大大提高了计算速度     

局域网传输系统可用性分析

采用可用性概念 ,分析局域网络系统的工作情况 ,对系统的平均故障间隔时间、中断率等参数进行评估 ,为工程设计和系统维护提供参考依据