单脉冲雷达仿真系统中回波的实现

单脉冲雷达仿真系统中,建立回波的数学模型是实现回波信号模拟的关键.在分析雷达回波相关特性的基础上,给出了回波的数学模型,并实现了逼真的雷达回波信号的模拟.     

大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

双离合器自动变速系统动力学建模及仿真研究

在分析双离合器自动变速器的典型结构及工作原理的基础上,利用面向对象的图形化系统仿真分析软件EASY5,建立了典型湿式双离合器动力换挡的自动变速器及其控制系统的动力学模型,并与采用传统的手动变速系统的车辆对比, 进行了加速性能的仿真分析,研究了车辆换挡过渡过程中影响换挡品质的主要因素及其改进措施。为这种新型的自动变速器在我国的推广和应用研究提供了一些基本的理论依据。     

基于虚拟样机技术的坦克扭力轴疲劳强度分析

采用虚拟样机技术,应用ADAMS软件中的ATV履带车辆工具箱、实体建模软件(SolidWorks)和有限元分析软件(Patran和Nastran),对柔性化的坦克悬挂系统扭力轴在动载荷工况下的疲劳强度进行了分析,找出了扭力轴的薄弱环节。     

水面舰艇"自助式"模拟训练环境生成研究

分析了当前水面舰艇战术背景条件下综合对抗模拟训练存在的主要不足,在此基础上,本文提出通过外接便携式计算机构建水面舰艇“自助式”模拟训练环境并验证了其可行性。提出了该模拟训练环境的基本功能、系统组成、工作流程;探讨了舰艇实装设备驱动、实时多任务仿真环境、舰艇机动过程仿真、训练过程重演等关键技术。这一方法有助于提高水面舰艇战术背景条件下综合对抗对抗模拟训练的有效性和针对性,具有较好的推广应用前景。     

新型防空武器系统抗击CM建模与仿真

在分析巡航导弹技术、战术特点的基础上,给出了抗击CM的基本要求,结合新型武器系统的特点提出了抗击作战的数学模型,并通过仿真实验验证了武器系统抗击巡航导弹作战的可用性与高效性,为我新型防空武器系统抗击CM作战的效能评估提供了必要的方法和依据。     

装备战场损伤的解析分析方法研究

为了提高装备战损模拟的效率,以蒙特卡洛方法为基础,构建了关于装备战损的解析模型。首先采用序贯法优化了仿真次数,以便以较少的仿真次数获得较高的仿真精度;分析了单因素对于装备损伤的影响,并建立了一元回归模型;采用正交试验分析了多因素之间的交互作用,并综合一元回归模型得出了装备战损的多元回归模型;最后结合弹着点分布模型与多元回归模型,建立了装备战损的解析模型,并通过实例验证了解析模型的正确性。