基于一维距离像的导弹目标运动特征提取方法

根据导弹目标运动方式及其回波特点,提出了一种基于一维距离像的运动目标特征提取方法。在对回波进行全去斜率处理后获得目标一维像。通过观测一维像序列的长度变化周期,提取目标的章动频率;根据距离像在成像窗口中的位置,获取雷达和目标的径向距离;利用相邻距离像相关方法,获取距离像平移位置,从而推出雷达—目标的径向速度。进行了相应的仿真实验,结果表明了该方法的有效性。     

SCB型钢结构防火涂料热分解动力学模型研究

用热重法(TG)对SCB型钢结构防火涂料的热分解过程进行了分析,并用微分法中的Achar法对热分解的数据进行处理,用多种机理方程进行了拟合,发现SCB型防火涂料的热分解可分为四个阶段:第一阶段热分解属于随机核化,第二、第三、第四阶段热分解属于三维扩散,球形对称机理。     

Crane scheduling with spatial constraints

In this work, we examine port crane scheduling with spatial and separation constraints. Although common to most port operations, these constraints have not been previously studied. We assume that cranes cannot cross, there is a minimum distance between cranes and jobs cannot be done simultaneously. The objective is to find a crane‐to‐job matching which maximizes throughput under these constraints. We provide dynamic programming algorithms, a probabilistic tabu search, and a squeaky wheel optimization heuristic for solution. Experiments show the heuristics perform well compared with optimal solutions obtained by CPLEX for small scale instances where a squeaky wheel optimization with local search approach gives good results within short times. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

动态系统可靠性分析的新概念

传统可靠性分析的概念只能描述静态逻辑关系,不能满足现代复杂动态系统可靠性分析的需要。在给出动态系统状态空间结构和结构函数的基础上,提出失效序列和失效丛的概念描述动态系统的故障模式,这一概念扩展了传统可靠性分析的概念,将割集、蕴含集等作为其在静态情形的特例。给出动态系统部件的概率重要度、结构重要度以及关键重要度的概念,用实例对提出的有关概念进行了说明。     

二维超声速空气引射器启动特性试验研究

（静）超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据：当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

在柴油机放热曲线计算中两个关键问题的解决方法

对影响柴油机放热曲线精度计算的因素进行了讨论 ,并对影响放热率计算的主要问题如动态上止点修正、示功图光顺处理两个主要环节进行了分析研究 ,提出了解决方法 .     

带脉冲负荷的电站柴油机动态性能分析

通过对某一个在脉冲负荷作用下配置了液压调速器的电站柴油机系统的动态仿真计算 ,确定了改善这类系统动态性能的方法 ,并通过调整使系统动态性能达到了要求     

基于分形几何的信号特征提取技术及其应用研究

针对分形客观展现事物原貌的特点 ,从工程应用的角度分别对信号的分形性验证、有效分析区间的确定、分形性描述和刻画、设备状态的趋势分析等方面作了探讨 ,形成了基于分形几何的信号特征提取技术 ,并描绘出基于分形几何的设备故障诊断模式