Consecutive k‐within‐m‐out‐of‐n:F system with exchangeable components

As a generalization of k‐out‐of‐n:F and consecutive k‐out‐of‐n:F systems, the consecutive k‐within‐m‐out‐of‐n:F system consists of n linearly ordered components such that the system fails iff there are m consecutive components which include among them at least k failed components. In this article, the reliability properties of consecutive k‐within‐m‐out‐of‐n:F systems with exchangeable components are studied. The bounds and approximations for the survival function are provided. A Monte Carlo estimator of system signature is obtained and used to approximate survival function. The results are illustrated and numerics are provided for an exchangeable multivariate Pareto distribution. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

大攻角飞行导弹控制器μ综合设计

导弹在大攻角飞行条件,由于非线性气动力和参数不确定等原因,其通道间存在强烈的耦合,经典的三通道控制器独立设计方法很难获得满意的系统性能.在设计大攻角飞行控制系统时,采用μ综合设计方法,通过仿真结果表明采用μ综合设计理论设计的控制器具有很好的鲁棒性能.     

基于数字信道化的极微弱信号载波频率引导模块设计与实现

针对深空探测中常规点数的FFT无法对极微弱信号进行精确的频率引导,而超长点数的FFT无法用现有器件实现,提出一种基于数字信道化的并行FFT频率引导方法.接收信号先经过数字信道化处理,均匀划分为若干窄带信号,然后分别对各子带信号进行FFT运算,最后通过对各子带有效谱线的联合检测完成载波频率的精确估计.在等效219点FFT的频率引导模块FPGA实现中,通过FFT模块的复用节约了硬件资源开销.测试结果表明:在8MHz采样率下该模块的测频精度小于10Hz.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

一种基于滑模变结构观测器的故障检测方法

提出一种基于滑模变结构观测器的残差生成及故障检测方法.利用滑模变结构所具有的对未知输入扰动的不变性,移除外界扰动对残差的影响,使残差只对故障信号敏感,从而提高故障检测的准确性,较好地解决基于状态估计的故障检测方法中检测鲁棒性与灵敏度之间的矛盾.仿真验证结果表明了该故障检测方法有较高的检测鲁棒性,同时对小幅值故障较为灵敏.     

基于变结构控制的自动驾驶仪设计

自动驾驶仪作为导弹制导控制系统的主要组成部分,是确保导弹在制导飞行中具有良好的稳定性和可控性的关键.而变结构控制以其在一定条件下对干扰和参数变化具有完全自适应的突出优点,在自动驾驶仪中已经有了深入的研究和实际的应用.简要概述了自动驾驶仪的设计难点、变结构在驾驶仪设计中的应用进展,然后针对战术导弹滚转通道设计了两种不同结构的变结构驾驶仪,并进行了仿真、分析比较.     

高压共轨燃油喷射系统结构参数影响的仿真研究

建立了高压共轨燃油喷射系统的模块化数学模型,进行了仿真分析,讨论了主要部件如高压油泵、高压油轨及喷油器的重要结构参数对系统特性的影响,确定了保证系统稳定性的结构参数选取原则.     

风场中平流层飞艇轨迹跟踪的滑模控制方法

为实现平流层飞艇驻空阶段可控飞行,研究环境风场中横侧向轨迹跟踪的滑模控制方法。建立平流层飞艇驻空阶段动力学模型,将动力学方程解耦为纵向运动方程和横侧向运动方程,采用小扰动方法对动力学方程进行线性化;利用滑模控制对外部干扰强鲁棒的特性,设计横侧向轨迹跟踪的滑模控制器;以直线与圆组成的复合轨迹跟踪控制为例,对提出的轨迹控制方法进行仿真验证。仿真结果表明,所提基于滑模的轨迹跟踪控制方法鲁棒性好,在一定范围的风场扰动条件下,可以实现对指令轨迹的有效跟踪控制,响应特性好。     

喷嘴结构对高压水射流影响及结构参数优化设计

喷嘴是产生高压水射流的关键部件,其结构形式对射流动力学性能有很大影响。以圆柱形喷嘴为对象,进行喷嘴结构对高压水射流的影响分析及结构参数优化设计。采用两相流计算流体力学模型进行喷嘴内外的射流流场分析。为节省计算资源,在优化设计时引入Kriging代理模型替代计算流体力学模型。分别采用改进的非劣分类遗传算法和基于分解的多目标进化算法进行单目标和多目标优化设计。研究结果表明:直线型喷嘴总体性能较优,凹型喷嘴的次之,凸型喷嘴性能最差。以直线型喷嘴为设计对象,以射流初始段长度和流量为目标,得到了单目标和多目标优化设计结果。单目标优化时,两个指标较基准外形分别提高14.71%和27.56%。多目标优化时,优化得到的半锥角处于[15.4°,89.8°]区间内。运用代理模型和进化算法的全局优化方法在进行喷嘴的优化设计时是有效的。     

高动态GNSS信号多普勒模拟任意阶DDS合成器设计*

为高精度模拟高动态条件下GNSS信号的多普勒特性,本文提出一种任意阶DDS信号合成器的设计方法。设计了任意阶DDS信号合成器的结构;通过理论分析,推导了各级累加器相位初值的计算公式;给出了字长选择方法;经仿真与验证,该方法能精确模拟GNSS信号的多普勒特性。此外,本文提出的DDS设计方法不受阶数的限制,可普遍应用于各类信号模拟器的设计。