水下航行器管路气容消声特性试验

结合水消声器的工作原理和水下航行器管路系统及水舱特性,提出了气容水舱消声方法,通过向水舱中充入一定压力和容量的空气,形成蓄能式弹性可压缩扩张室消声容腔,充分利用水下航行器的水舱对通海管路进行消声。对气容水舱消声原理和消声性能进行试验研究,结果表明气容水舱可以有效降低管路出口处的流量和压力脉动,阻断噪声传播通道,降低管路系统水下辐射噪声,为水下航行器水下辐射噪声控制提供了有效方法。     

动力翼伞风扰补偿高度控制方法

外界风场是影响翼伞高度跟踪精度的最主要扰动因素。针对该问题,建立了动力翼伞的八自由度模型,并在传统自抗扰控制的基础上,设计一种基于风场前馈补偿的改进抗扰控制器,对外界的风场干扰进行针对性补偿,实现翼伞系统的高度跟踪控制。在通过仿真实验对控制器进行初步验证的基础上,进行了翼伞系统的实际飞行实验。在实际飞行环境下,仿真中所调节的控制器参数可直接应用于实际飞行实验,翼伞系统的平均高度跟踪误差在2.5 m以内,证明所设计的控制器存在一定的实际应用价值。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

大椭圆停泊轨道月球探测器发射窗口运动学约束特性分析及转移轨道快速设计方法

通过分析大椭圆停泊轨道月球探测器发射窗口的运动学约束特性,给出了转移轨道运动学约束对发射窗口的影响规律,进一步明确了在该种情况下月球探测器的发射机会和增加窗口的可能性.并结合发射窗口运动学约束特性,提出了一种基于大椭圆停泊轨道的地月转移轨道快速设计方法.仿真结果验证了大椭圆停泊轨道下探测器发射窗口运动学约束特性分析的正确性,以及转移轨道设计方法的有效性.     

一种改进的事件驱动系统框架

在给出事件驱动系统安全漏洞的基础上,指出了产生漏洞的根本原因是:系统忽视了输入系统的事件序列之间存在的相关性;系统无条件信任任何事件源产生的事件.针对这两个原因,相应提出了事件序列形式安全分析模型及基于事件源的可信度评估模型,依据这两个模型,构建了一种改进的事件驱动系统框架.     

基于循环子空间理论的线性系统测试矩阵优化

研究了线性定常系统在循环指数大于1(即其约当标准形不同的约当块有重根)的情况下测试矩阵的优化方法.以循环子空间相关定理的证明为基础,根据根向量链的相关特性,得到了测试向量的线性和与系统观测性的直接关系,给出了在保证系统可观测性的同时,使得测试代价最小的测试矩阵优化方法.算例表明,提出的方法简单直观,对配置测试向量具有良好的工程价值.     

冲压增程弹进气道设计方法与性能分析

以冲压增程弹为应用背景进行了进气道设计.结合增程弹的特点,讨论了轴对称进气道中心锥参数、喉道参数、外罩参数的选择.特别对进气道唇口处参数、扩张段角度设计方法进行了分析.设计了单锥混压式、单锥外压式以及双锥混压式三种进气道,并进行了数值模拟.分析了进气道主要设计参数对其性能的影响.数值结果表明,就增程弹的性能要求而言,双锥混压式进气道的性能较高.     

一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.     

捷联惯导系统快速自对准误差模型的建立

通过对惯性制导系统两个基本方程的研究,求出了各状态矢量在各坐标系下的微分方程,然后以ψ角法所确立的平台为基准,分别推导得出惯性制导系统各主要状态的微分方程,从而建立了捷联惯性制导系统的误差模型.最后根据静基座捷联惯导系统初始对准的特点对其进行简化,得到了静基座捷联惯导系统快速自对准的误差模型.