埋地储罐抗浮性能分析与评估

通过分析埋地储罐在不同覆土状态下所受的浮力和覆土重力,对几种常用规格埋地储罐的抗浮能力以及影响抗浮性能的因素进行了分析比较,指出了使用现有抗浮计算公式存在的问题,提出埋地储罐的抗浮验算新方法,并说明了工程中常用的埋地储罐抗浮措施.     

Analysis of a production system in a general configuration

We consider a production system comprising multiple stations (or workshops) such as an entry station, a set of work stations, a central station, and an exit station, which are arranged in a general configuration. A worker (or a vehicle tool) is assigned to each station, who sends a part from the station to the destination station according to the required process path of the part. Any part is allowed to visit a work station more than once if its process path requires. We propose a new control strategy with the push policy for instructing each worker to send a part and the kanban mechanism for controlling the work‐in‐process (WIP) in each work station. As all work stations have limited local buffers, the central station is used for storing blocked parts temporarily. Such a production system is modeled as an open queueing network in a general configuration with a Markovian part sending policy and a machine no blocking mechanism. The queueing network is analytically characterized. Some important performance measures are compared with other control strategies. A semi‐open decomposition approach is applied to the queueing network for computing the blocking probabilities when parts arrive at the work stations. An algorithm is developed based on the semi‐open decomposition approach. Numerical experiments show the quality of the solutions obtained by the algorithm as well as a property of a performance measure. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 128–143, 2001     

基于Petri网的C2S性能分析方法研究

给出了用时间连续随机Petri网和时间离散随机Petri网计算系统稳态概率的方法,并将其应用于指挥控制系统(C2S)的性能分析中,分析结果表明这种计算方法是可行的。     

采用M阶正交信号的DS-CDMA系统性能分析

随着移动通信的迅速发展 ,码分多址技术受到越来越多的关注。为了提高系统的抗干扰性能 ,在CDMA系统中采用了M阶正交信号。通过分析采用M阶正交信号的DS CDMA系统基带接收信号的统计性能 ,文中得出了多址、多径干扰下系统的误码率计算公式 ,并详细分析了系统的抗干扰性能。     

双绝热近似下磁流体力学线性稳定性原理

本文得出了双绝热近似的磁流体力学能量积分关系式。分析表明这种磁流体力学系统是保守的,可以采用运动方程或能量原理方法分析系统的稳定性特性。本文从控制方程组出发讨论了线性稳定性的基本原理,指出纵向压力增值有助于系统的稳定性。     

Economic design of a two-stage control chart based on both performance and surrogate variables

The traditional approach to economic design of control charts is based on the assumption that a process is monitored using only a performance variable. If, however, the performance variable is costly to measure and a less expensive surrogate variable is available, the process may be more efficiently controlled by using both performance and surrogate variables. In this article we propose a model for economic design of a two-stage control chart which uses a highly correlated surrogate variable together with a performance variable. The process is assumed to be monitored by the surrogate variable until it signals out-of-control behavior, then by the performance variable until it signals out-of-control behavior or maintains in-control signals for a prespecified amount of time, and the two variables are used in alternating fashion. An algorithm based on the direct search method of Hooke and Jeeves [6] is used to find the optimum values of design parameters. The proposed model is applied to the end-closure welding process for nuclear fuel to compute the amount of reduction in cost compared with the current control procedure. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 958–977, 1999     

高速三维地形显示系统的体系结构

从自行设计的专用三维地形显示的硬件和软件系统的观点出发,讨论了高速三维地形显示系统的体系结构、关键技术及其实现方法。以新一代的高速处理器ＩＮＴＥＬｉ８６０为核心,采用分配树技术,解决多路并行输出产生的竞争和瓶颈问题;实现Ｚ－缓冲硬件算法,提高系统的图形消隐速度;设计多帧存体结构,支持多通道、多画面信息的快速显示。     

支持高效组播的高性能路由器QoS机制研究与实现

研究并提出一种有效支持组播的高性能路由器QoS机制QoS RESM,该机制以多阈值机制为基础,考虑远程转发引擎的拥塞状态信息,引入全局控制反馈机制,有效完成了高性能路由器上支持组播的流量控制。最后描述QoS RESM在基于网络处理器的核心路由器上的实现方法。     

三维石英纤维增强氮化物基复合材料的烧蚀性能及显微结构

采用先驱体转化法制备了三维石英纤维增强氮化物基复合材料(3D SiO2f/Si3N4-BN),用等离子射流烧蚀方法研究了复合材料的烧蚀性能,运用扫描电镜及能谱仪对烧蚀表面微观形貌进行了观察和分析。结果表明氮化物基复合材料在高压高热流等离子体烧蚀下线烧蚀率为0.91mm/s,石英纤维熔融并被吹除带走了大量的热量,熔融层抑制了基体的机械剥蚀。基体由于强度高、升华温度高,延缓了熔融层的吹除,表明氮化物基复合材料是一种良好的耐高温烧蚀透波材料。     

多喷嘴超声速引射器压力匹配性能试验研究

建立了多喷嘴超声速引射器试验台,采用燃气作为一、二次流驱动工质对多喷嘴超声速引射器进行了试验研究,重点考察了引射器的压力匹配问题。试验结果表明:一次流总压越低,引射喷嘴出口压力越低,与二次流压力匹配越容易;二次流总压越低,保持压力匹配对引射器的要求越高;二次流总温对压力匹配基本无影响。