目标起伏特性对雷达威力性能的影响分析

介绍了典型雷达目标RCS起伏模型,阐述了起伏目标在实际中的应用,建立了目标损耗和雷达作用距离之间的关系,为不同目标的等效替代推算提供了理论依据.验证了雷达目标满足卡平方分布时发现概率和起伏因子之间的关系.并针对不同类型的起伏目标,建立了雷达探测距离和发现概率之间的关系,为雷达的威力检测和飞行目标的航线设计提供依据.     

基于多假设跟踪弹道导弹主动段跟踪算法

针对弹道导弹主动段防御中多枚弹道导弹同时跟踪问题,提出了基于多假设思想的主动段跟踪算法.重点阐述了该算法中假设生成、假设概率计算、假设约简以及假设剪枝等环节.从工程实用的角度出发,采用求解一个线性分配问题(LAP)方法得到M个最优假设,大大减少了假设数量,并运用N-scan回溯剪枝方法对假设进行剪枝,确定要输出的航迹,提高了算法的效率和实用性.仿真实验表明,该算法能够对主动段多枚弹道导弹目标准确关联跟踪.     

近程舰炮武器系统拦截高速目标发展研究

反舰导弹的超声速特性使得现役近程舰炮武器系统的反应时间严重不足,毁伤能力明显下降.针对高速目标,分析了目标对系统的随动性能需求,研究了系统情报处理、传感器捕获跟踪及火控解算等时间特征参数、及系统毁伤能力,并提出了解决问题的初步想法.分析结果表明,可以提高近程舰炮武器系统对超高声速目标的跟踪毁伤能力,实现对该类目标的有效拦截.     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.     

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.     

One-bit splitting deceptive jamming against SAR

One-bit quantization is a promising technique due to its performance retention and complexity reduction in a deceptive jammer against synthetic aperture radar (SAR). In this paper, the 1-bit quantization technology is utilized to agilely generate split false targets in the SAR imagery once the radar signal is intercepted, which reduces the complexity of the jammer significantly with guaranteed focusing quality. A single-frequency threshold is used to decompose harmonics incurred by the 1-bit quantization, and its parameters are adjusted through different pulse repetition intervals to provide steerable modulations. In this way, the SAR signal is split into coupled false scatterers during the 1-bit interception. By further deploying amplitude, time-delay, and Doppler frequency modulations on the 1-bit intercepted signal, the split false targets are created. The proposed approach is compared with different deceptive jamming methods to show its validity in effectiveness and cost, and numerical experiments are also presented for verification.     

基于仿真技术的动力装置优化设计技术研究

针对传统动力装置设计方法中存在计算复杂、动态性能难以计算等问题,提出利用动力装置仿真系统来设计船舶动力装置的方法。首先,利用模块化建模原理建立了动力装置各组成部件的数学模型,然后利用C 语言编写了各模型的仿真程序,并建立了动力装置仿真系统。利用该仿真系统对某型船舶的全燃动力装置进行了详细设计,设计过程及结果表明,采用仿真系统来设计动力装置可以准确计算动力装置的动态性能,同时对动力装置各部件的性能参数进行优化。     

基于波束域MUSIC方法的高分辨方位估计

现代声纳系统普遍采用水听器基阵和一定的信号处理来提高对目标的检测和定位能力,而基阵的波束形成则在其中起着核心作用。文中研究了窄带波束域高分辨方位估计技术,分析了波束域MUSIC方位估计的构造过程和具体实现方法。仿真计算表明,基于波束域MUSIC的方位估计算法是一种分辨空间小角域内多个目标的有效方法。     

无人机虚拟维修训练系统及其HLA设计

以某型无人机虚拟维修训练系统的设计为实例,采用Creator对联邦实体建模,结合动态视景仿真软件Vega Prim e进行环境与目标的驱动,基于高层体系结构HLA对系统的分布式网络互联进行仿真设计,无人机虚拟维修训练系统有效地改善了目前无人机结合实装进行操作训练的局限性。     

FAE野外空中爆炸效应实验研究及其一次起爆机理探讨

野外进行1．8kg的FAE静爆实验,采用不同配方的纯固态燃料和液一固混合燃料与等质量的TNT对比分析。实验结果表明,FAE的爆炸效果明显优于等质量的TNT,而纯固态FAE爆炸性能强于液一固混合FAE;FAE爆炸后测到的超压分布呈现单调减趋势,这是由于测量点都分布在云爆区范围之外;FAE的云雾分散效果优于等质量的TNT装药,火焰持续时间也长。通过高速摄影图片看出,合适配方的纯固态无约束的FAE弹体火球的持续时间与有约束的液一固混合FAE弹体相当。分析了纯固态FAE爆炸后超压峰值时刻与火球最大直径时刻不同步的原因,探讨了纯固态FAE一次起爆机理。