Effect of energy content of the nitraminic plastic bonded explosives on their performance and sensitivity characteristics

Information about the forty nine nitraminic plastic bonded explosives (PBXs) and different nitramines were collected. Fillers of these PBXs are nitramines 1,3,5-trinitro-1,3,5-triazinane (RDX) and β-1,3,5,7-tetranitro-1,3,5-tetrazocane (β-HMX), cis-1,3,4,6-tetranitro-octahydroimidazo-[4,5-d]imidazole (bicyclo-HMX, BCHMX) and ε-2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (ε-HNIW, CL-20) which are bonded by polyfluoro-elastomers, polydimethyl-siloxane, poly-glycidyl azide, polyisobutylene, polystyrene-butadiene, poly-acrylonitrile-butadiene and hydroxyl-terminated polybutadiene in addition to a melt cast compositions based on 2,4,6-trinitrotoluene. For thirty two of these PBXs the relationships are specified and analyzed between heats of their combustion and relative explosive strengths; by means of these relationships it might be possible to estimate, which groupings in the macromolecule of binder could be liable to their primary fission in the PBXs initiation. Similarly, for forty two of these explosives, the relationships are described and analyzed between their enthalpies of formation and impact sensitivities; here is especially attention paid to PBXs filled by BCHMX. Specific rate constants from Vacuum Stability Test (VST) of four nitramines and twenty PBXs are introduced into relationships with their enthalpies of formation. Regarding to all the mentioned cases, increasing of energy content of the studied explosives leads to increase of the relative explosive strength or initiation reactivity, respectively. Exception with the opposite trend, the outputs of VST are for BCHMX, where in PBXs are matrices with the esteric plasticizers or the energetic poly-glycidyl azide. Admixture of RDX or HMX, respectively, into the BCHX PBXs gives ternary PBXs whose thermal stability, in the sense of applied VST, is higher comparing to the original binary explosives.     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

HYLTE与TRIP喷管在大功率氟化氘激光器中的应用对比分析

简述了燃烧驱动大功率连续波DF化学激光器的发展现状。比较了HYLTE与TRIP两种喷管的结构参数,总结了两种喷管的性能差异。采用数值模拟手段,参考相关试验数据,计算了典型增益分布对应的共焦非稳腔输出光束模式。从大功率DF激光器研制存在的光斑均匀性和腔镜负载两个难题的角度,结合喷管制造工艺要求,认为HYLTE喷管较TRIP喷管更适用于大功率DF激光器。     

西藏与内地古建筑常用木材燃烧特性对比研究

为研究西藏高海拔条件对古建筑火灾的影响,分别在拉萨与廊坊进行了中等规模木垛燃烧实验。测得了木垛燃烧的质量损失速率、火焰高度和燃烧温度,并分析了空气中氧气含量和大气压力对木垛引燃和燃烧的影响。实验表明：在拉萨低气压条件下,木垛引燃难度加大、燃烧时间增加、质量损失速率降低、木垛中心温度降低。     

一类流行病动力学模型的稳定性研究

本文建立了一类流行病动力学的S-I-D-S模型,讨论了该模型的无病平衡点的全局稳定性及有病平衡点的局部稳定性。     

阻化烟煤堆非稳态温度场计算

依据实验测得的干、水湿和阻化烟煤氧化反应的动力学参数 ,引入了氧传质模型和水蒸气平衡模型 ,利用计算机编程对干、水湿和阻化烟煤堆内的一维非稳态自热过程的模型分别进行差分计算 ,求得相应煤堆内的非稳态温度场。结果表明 ,采用简化的一维自热过程的非稳态数学模型计算 ,可以剖析氧传递、水蒸气平衡和阻化处理对煤堆自热的影响 ,可以评价实际煤堆的自热危险性和判断烟煤堆的阻化处理效果     

谈短跑放松能力的作用与训练

要高度激烈竞赛中,提高机体高速奔跑中的放松能力是短跑获取胜利的关键,放松能力的培养可从短跑专项技术的高度自动化和稳定性、肌肉力量的均衡发展、神经系统的灵活性、肌体的柔韧性及心理素质等方面共同协调形成。     

一种用模糊逻辑控制的新型三相电压型PWM整流器

介绍一种基于模糊逻辑的三相AC/DC空间矢量变流技术方法,该方法软件结构简单,便于技术实现.应用该方法研制的样机,谐波失真THD值小于3.9%.     

Cu粉粒径及含量对Ni/MH电池负极放电性能的影响

为了提高Ni/MH电池中储氢电极的放电性能,以电解Cu粉为充填材料与活性物质混合制备电极,研究Cu粉粒径及含量对电极性能的影响。研究发现,Cu粉粒径越小,含量越高,电极的放电容量、高倍率放电性能、及在低温和高温下的放电能力均提高,且Cu充填电极的性能优于Ni充填电极。Cu充填电极中析氢反应的交换电流密度较大,过电势较小,说明其电催化活性好,电极反应阻力小。SEM分析发现,充放电循环后的Cu充填电极,其储氢合金颗粒表面覆盖着一层细小Cu颗粒和丝状物,这是电极性能提高的主要原因。     

一类非线性动力系统的定性分析

研究2种生物种群在一段时间内是否可以相互生存,有着重要的现实意义。为了获得这方 面的有关结果,本文运用微分方程的稳定性理论,详尽地讨论了一类非线性动力系统模型平衡点的类型, 并进一步给出了该系统极限环的不存在性,从而得到系统的共存性。