环境温度对导弹发动机点火时机的影响及控制策略

针对埋入式进气道在发动机点火时刻对导弹飞行攻角的严格限制,提出了攻角点火窗口的概念;以助推器在低温、常温和高温下的推力数据为基础,分别计算了导弹飞行攻角进入攻角点火窗口的时刻,并对时刻差异进行动力学分析;为消除环境温度变化对点火指令发出时机的影响,引入伪攻角信号,设计攻角控制律。半实物仿真结果表明,该控制方法能有效消除环境温度变化对导弹飞行攻角进入攻角点火窗口时刻的影响,且能够使导弹攻角在发动机点火过程中保持稳定,具有一定的工程实用价值。     

Preparation and characterization of HMX/EVA/hBNNSs micro-composites with improved thermal stability and reduced sensitivity

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal conductivity.Thin-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry process.For com-parison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar process.The morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively investigated.Results showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Insensitive energetic microspheres DAAF/RDX fabricated by facile molecular self-assembly

Insensitive energetic materials are promising in the defense weapons field. However, energetic materials still suffer from great challenges and the concern about their safety limits their utilization. In this work, insensitive energetic explosive 3,3′-diamino-4,4′-azoxyfurazan/hexahydro-1,3,5-trinitro-1,3,5-triazine (DAAF/RDX) microspheres were fabricated by self-assembly method. Rod-like DAAF/RDX was prepared by mechanical ball milling for comparison. DAAF/RDX composites with different mass ratios (90:10, 80:20, and 70:30) were obtained. The morphologies and structures of as-obtained DAAF/RDX composites were characterized by scanning electron microscopy (SEM), powder x-ray diffraction (PXRD) and fourier transform infrared spectroscopy (FT-IR). The results showed that DAAF/RDX microspheres exhibited regular shaped microspheres with sizes from 0.5 to 1.2 μm. There was no crystal transition during the modification process. The thermal properties of as-obtained materials were then evaluated by differential scanning calorimetry (DSC) and materials studio software. DAAF/RDX microspheres showed an advanced decomposition peak temperature compared with rod-like DAAF/RDX. The binding energy and peak temperature values at zero β_i (T_P0) of DAAF/RDX (90:10) increased by 36.77 kJ/mol, 1.6 °C, and 58.11 kJ/mol, 12.3 °C compared to DAAF/RDX (80:20) and DAAF/RDX (70:30), indicating the better thermal stability of DAAF/RDX (90:10). The characteristic drop height (H₅₀) of DAAF/RDX (higher than 100 cm) composites was higher than that of raw RDX (25 cm), suggesting significant improvements in mechanical safety. The preparation of DAAF/RDX microspheres is promising for the desensitization of RDX and useful for the formation of other materials and future wide applications.     

Van der Pol-Duffing系统的非共振Hopf分叉

用多尺度法求出了系统的一次近似平均方程和极坐标形成的分叉响应方程。研究了系统非共振情况下的平衡点性质和Hopf分叉,讨论了零解和极限环的稳定性     

新型F1ash单片机智能温控系统设计

采用新型的Flash单片机、信号采集电路与温控电路等构成一个对固体火箭发动机温控系统 ,满足其固体火药的初始温度设计要求。     

热边界层流动中管道的热损失

在高粘液体管道输送中,利用热边界层减阻需确定热流量的计算。热边界层流动中管道的各种热损失是总热流量的一部分。热损失有管内、管外及保温层三种形式。管外热损失是向周围的空气散发的,通过对流的形式发生。管内的热损失是导热或对流。保温层的热损失主要是导热。利用热边界层理论的成果,给出了各种传热系数和管道热损失的计算公式,并给出了多个计算实例。     

柱锥级联型爆磁压缩发生器的实验研究

研究了柱锥级联型爆磁压缩发生器。给出了主要实验结果。发生器的负载是3.5μH,最大电流是55.8KA,上升前沿是14.3μs,电压为30.5KV。平均电流放大倍数是6.4。     

血小板在凝血中作用的动力学模型

在生化实验的基础上提出了血小板在凝血中作用的动力学模型,通过定性分析和数值模拟,得到了血小板的激活比率、因子Ⅷ、Ⅸ对凝血酶生成有重要影响的一系列结论.     

含新型间断探测器的混合WCNS格式在间断无粘可压流的应用

为了让高精度数值格式在含间断和小尺度涡等复杂结构的超声速无粘可压缩流动情况下,仍能鲁棒地捕捉激波并快速得到流场高保真的模拟结果,研究了以子模板导数组合为基础的光滑度量算法,构造了精度与鲁棒性兼顾的新型间断探测器,使间断识别对小尺度涡也具有高分辨率;研究了混合加权紧致非线性格式(weighted compact nonlinear scheme, WCNS)方法,对流场中的光滑与间断区域分别使用线性与非线性加权格式求解,从而克服单一非线性格式在光滑区分辨率难以达到设计精度的问题。数值实验表明,使用新型间断探测器的混合WCNS格式对一维、二维Euler方程模拟结果良好,并且相比于在全流场使用局部特征分解的原始WCNS方法有计算效率的提高。