机动管线水顶油排空油水混合物切割工艺研究

排空是机动管线的一项经常性作业。在水顶油排空过程中,不可避免地会产生混油,因此混油的切割工艺尤为关键。通过对机动管线水顶油排空作业终端混油切割流程、设备操作的分析,提出了采用1个三通球阀代替2个闸阀的切割流程,自行搭建了实验平台,测量了三通球阀的流动特性,论证了三通球阀作为机动管线混油切割阀的可行性。实验表明,新流程的使用降低了切割操作难度,提高了切割作业的快速性和准确性。     

A three-stage model for the perforation of finite metallic plates by long rods at high velocities

A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages: (1) initial penetration; (2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

This paper studies the four-engine liquid rocket flow field during the launching phase. Using three-dimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model, an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors, including wedge-shaped flame deflector and cone-shaped flame deflector, are calcu-lated. The finite-rate chemical kinetics is used to track chemical reactions. The simulation results show that afterburning mainly occurs in the mixed layer. And the region of peak pressure occurs directly under the rocket nozzle, which is the result of the direct impact of exhaust plume. Compared with the wedge-shaped flame deflector, the cone-shaped flame deflector has great performance on guiding exhaust gas. The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction, respectively. The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2% and 9.9% higher than those for the cone-shaped flame deflector. The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.     

Influence of magnetically constricted arc traverse speed (MCATS) on tensile properties and microstructural characteristics of welded Inconel 718 alloy sheets

The magnetically constricted arc technique was implemented to mitigate the heat input related metal-lurgical problems in Gas Tungsten Arc Welding (GTAW) of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone. This paper reports the direct effect of magnetically constricted arc traverse speed (MCATS) on bead profile, tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding (GTCAW) process. The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing. It is correlated to the solidification conditions during welding. The relationship between MCATS and Arc Constriction Current (ACC) was derived. Its interaction effect on the magnetic arc constriction and joint performance was analysed. Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties (98.39% of base metal strength with 31.50% elongation). It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer, discrete laves phase in interdendritic areas.     

应用电弧喷涂技术治理舰船钢结构腐蚀

本文论述了舰船钢结构的腐蚀机理,腐蚀特点及影响因素.指出电弧喷涂铝复合涂层能够长期有效地对舰船钢结构进行腐蚀保护,延长舰船钢结构的使用寿命,这是其它任何腐蚀防护技术都难以实现的.电弧喷涂铝复合涂层的具体涂层设计是:电弧喷涂铝金属涂层十有机封闭涂料涂层十常规舰船面层涂料涂层.     

二元翼型跨音速非定常测压实验研究

本文描述了在南航ＮＨ－１风洞中,对ＮＡＣＡ００１２翼型绕其１／４弦长处轴作俯仰正弦振动时,跨音速非定常压力测量的实验。实验目的在于研究在跨音速风洞中二元翼型非定常压力实验中的技术问题,包括实验装置的设计,数据采集和处理等,并初步研究了Ｍ数、攻角、振幅等参数对非定常压力分布的影响。     

An efficient metaheuristic for integrated scheduling and staffing IT projects based on a generalized minimum cost flow network

Scheduling IT projects and assigning the project work to human resources are an important and common tasks in almost any IT service company. It is particularly complex because human resources usually have multiple skills. Up to now only little work has considered IT‐specific properties of the project structure and human resources. In this article, we present an optimization model that simultaneously schedules the activities of multiple IT projects with serial network structures and assigns the project work to multiskilled internal and external human resources with different efficiencies. The goal is to minimize costs. We introduce a metaheuristic that decomposes the problem into a binary scheduling problem and a continuous staffing problem where the latter is solved efficiently by exploiting its underlying network structure. For comparison, we solve the mixed–binary linear program with a state–of–the–art commercial solver. The impacts of problem parameters on computation time and solution gaps between the metaheuristic and the solver are assessed in an experimental study. Our results show that the metaheuristic provides very favorable results in considerable less time than the solver for midsize problems. For larger problems, it shows a similar performance while the solver fails to return feasible solutions. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 111–127, 2012     

基于蚁群算法的Costas跳频信号自测速方法

分析了速度对Costas跳频信号回波的影响,用波形熵作为性能指标函数,研究了基于蚁群算法的Costas跳频信号自测速方法,仿真验证表明,这种测速方法能够明显提高测速的精度.     

水下无载波窄脉冲相关特征检测

广泛应用于超宽带雷达的无载波窄脉冲信号具有较高的距离和角度分辨率、超近程探测能力、便于目标识别、抑制混响起伏等独特优势.现将其应用于水下声纳系统,水下窄脉冲信号具有宽低频特性,从相关方法出发,讨论无载频窄脉冲对体目标信号的检测.根据窄脉冲信号脉宽内相关特征不变特性,体目标信号经过相关器和特征判决器,可明显减小虚峰出现的概率.数值模拟和实验均验证并证明单次检测即可检测到目标信号,精确检测峰值出现时间.