高空气球地面充氦气量计算方法分析与试验评估

作为高空气球研究中的一个重要问题,气球在地面发放前充入的氦气量会直接影响其上升速度和驻空高度,进而影响平台的可靠性和稳定性。因此研究充氦气量的准确计算方法十分必要。建立了高空气球上升过程动力学模型,计算了气球初始升速的理论值,用于与实际初始升速对比,为评估充氦气量计算方法提供依据。归纳了三种较为典型的高空气球地面充氦气量计算方法,根据实际开展的飞行试验,分析对比了三种方法的准确性和误差范围。提出了浮力补偿规律,完成了对三种方法的评估。通过研究可以对现有充氦气量计算方法进行有效修正,进而为高空气球的实际飞行提供指导。     

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

This paper studies the four-engine liquid rocket flow field during the launching phase. Using three-dimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model, an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors, including wedge-shaped flame deflector and cone-shaped flame deflector, are calcu-lated. The finite-rate chemical kinetics is used to track chemical reactions. The simulation results show that afterburning mainly occurs in the mixed layer. And the region of peak pressure occurs directly under the rocket nozzle, which is the result of the direct impact of exhaust plume. Compared with the wedge-shaped flame deflector, the cone-shaped flame deflector has great performance on guiding exhaust gas. The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction, respectively. The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2% and 9.9% higher than those for the cone-shaped flame deflector. The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Numerical research on adverse effect of muzzle flow formed by muzzle brake considering secondary combustion

The simulation of the artillery interior and intermediate ballistics problem is performed to investigate the influence of a gas dynamics device, muzzle brake, on the muzzle hazard phenomena, such as flash and blast waves. The correlation of the chemical reactions with the characteristics of the muzzle flow field is analyzed by the simulation for a further understanding of the secondary combustion phenom-enon of the muzzle flow. The novel structure of muzzle flow caused by the muzzle brake is presented by the simultaneous solution of the interior ballistics model and multi-species Navier-Stokes equations in order to analyze the influence of the muzzle brake structure on the chemical reactions. The secondary combustion of the muzzle flow due to the oxygen-supplement chemical reactions is obtained by the chemical reaction kinetic model. The interaction of the blast waves released from the muzzle brake is illustrated in detail and the mechanism of the formation of muzzle flash is analyzed. This research provides a reference for the studies on the suppression of the muzzle flash.     

Influence of magnetically constricted arc traverse speed (MCATS) on tensile properties and microstructural characteristics of welded Inconel 718 alloy sheets

The magnetically constricted arc technique was implemented to mitigate the heat input related metal-lurgical problems in Gas Tungsten Arc Welding (GTAW) of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone. This paper reports the direct effect of magnetically constricted arc traverse speed (MCATS) on bead profile, tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding (GTCAW) process. The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing. It is correlated to the solidification conditions during welding. The relationship between MCATS and Arc Constriction Current (ACC) was derived. Its interaction effect on the magnetic arc constriction and joint performance was analysed. Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties (98.39% of base metal strength with 31.50% elongation). It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer, discrete laves phase in interdendritic areas.     

高性能路由器中的分组非精确调度技术

随着网络带宽的不断提高,分组到达路由器的时间间隔不断缩短,对路由器处理分组的速度提出了新的要求。传统的分组调度算法,如WFQ,由于性能和可扩展性等问题,难以在高性能核心路由器中实现。为此,提出了分组非精确调度技术,在不影响应用QoS的前提下对经典的调度算法进行修改,通过简化硬件设计提高调度器的服务能力。模拟分析表明,采用非精确调度技术的SLQF算法的延时特性与传统算法LQF基本一致。     

高速路由与交换技术现状及发展趋势

多个方向的可扩展特性是新一代互联网的重要特点,这对高性能路由器的性能、规模、功能和服务等能力提出了更高的要求,高速路由与交换技术是承载这种可扩展特性的关键技术。从网络处理器设计、路由查找技术以及高速交换技术三个方面总结了高速路由与交换技术的研究和发展现状,并展望了未来的发展趋势。     

大炸高频率捷变无线电引信的研究

分析了现代战争对无线电引信炸高提出的新要求,提出了一种采用频率捷变体制的大炸高无线电引信的设计方案,采用了软件无线电的设计思想,使引信具有软件可编程能力,提高了引信对战场环境的适应能力和抗干扰能力。在多工作频点捷变的基础上提出一种多频脉冲联合比相测距算法,利用回波相位差实现了引信炸高的测量。最后的算法仿真结果验证了这种基于频率捷变的大炸高无线电引信体制的可行性。     

On the asymptotic optimality of algorithms for the flow shop problem with release dates

We consider the nonpermutation flow shop problem with release dates, with the objective of minimizing the sum of the weighted completion times on the final machine. Since the problem is NP‐hard, we focus on the analysis of the performance of several approximation algorithms, all of which are related to the classical Weighted Shortest Processing Time Among Available Jobs heuristic. In particular, we perform a probabilistic analysis and prove that two online heuristics and one offline heuristic are asymptotically optimal. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

高层建筑火场供水原则及其应用

能否保证火场不间断供水,是高层建筑火灾扑救成功的关键。根据高层建筑的特点,提出了高层建筑火场供水原则,并依据此原则,论述了高层建筑火场供水方法及注意问题。