脉压雷达信号处理仿真分析研究

针对脉冲压缩雷达,从系统仿真的角度建立了描述雷达与目标位置的三维坐标系,根据雷达信号脉冲压缩和非相参积累模型,通过计算机Matlab仿真得出了目标回波经过脉压雷达信号处理后的结果,并进一步分析了脉冲压缩和脉冲积累处理的效能。结果表明:目标回波信号通过脉冲压缩和脉冲积累处理后,显著提高了目标回波信噪比以及对目标距离估计的精度。     

高密度存储服务器高速链路设计与仿真

针对高密度存储服务器中高速链路结构复杂、信号速率高、链路长度长等特点,在高速链路PCIE3.0和SAS3.0设计过程中引入全面的信号完整性仿真。通过对高速印刷电路板设计中拓扑结构、材料类型、印刷电路板结构等关键项目进行仿真设计,获得成本最低、性能达标的最优方案;通过全链路有源仿真,预估系统性能,降低系统投产风险;通过系统实际信号测试,验证系统性能完全满足相应规范要求,仿真结果有效可靠。     

视觉惯性导航系统初始化方法综述

视觉惯性导航系统通过初始化,对尺度信息、重力向量、速度、惯性传感器偏差等一系列状态估计所需参数进行快速求解,以提升系统后续导航定位与环境感知的准确性。根据传感信息耦合方式,视觉惯性导航系统初始化方法可以分为三类:联合初始化、非联合初始化和半联合初始化。基于现有研究工作,从基础理论、发展与分类、现有方法、性能评估四个方面展开,对目前主流的初始化方法进行综述,并总结视觉惯性导航系统初始化领域未来的发展趋势,有利于对视觉惯性导航系统初始化方法形成总体性了解并把握其发展方向。     

GNSS信号功率增强对调零抗干扰接收机的性能影响

由于卫星端信号发射功率小、信号传播损耗大,到达接收机的卫星导航信号极其微弱,容易被干扰。为有效应对电磁干扰的威胁,在系统层面和用户层面同时采取抗干扰措施将是一种很好的选择。建立调零抗干扰接收机抗干扰能力分析模型,并定量分析信号功率增强对调零抗干扰接收机抗干扰性能的提升效果。结果表明：信号功率每增强10 dB,接收机抗干扰能力可提升3～4 dB,但从提高接收机非极限条件下的接收性能(载噪比、测距定位精度等)的角度,信号功率增强15～20 dB时,接收性能最优。研究成果可为卫星功率增强量的优化设计以及终端抗干扰设计提供参考。     

民用飞机运行可靠性研究进展

结合民用飞机运行可靠性研究的技术现状与发展趋势,根据现有的型号设计、研制和在役飞机的具体情况,阐述了民用飞机运行可靠性研究需求。通过梳理民用飞机运行可靠性理论研究进展及工程应用现状,从运行数据采集与处理、运行可靠性分析方法、运行可靠性预测反馈技术、运行可靠性的优化设计、优化维修任务、运行可靠性综合管理平台六个方面,详细阐述民用飞机运行可靠性研究现状及面临问题,展望了民用飞机运行可靠性研究未来发展方向。     

基于图像处理的火焰检测算法研究

简要介绍了火焰检测系统构成和火焰燃烧特性,并根据全炉膛火焰的燃烧特性,从火焰图像中提取了反映炉膛火焰燃烧状态的特征量.最后,通过对火焰图像的处理及对火焰检测算法的分析与研究,利用计算机仿真得出火焰图像特征量与燃烧状态的关系,提出火焰燃烧稳定性判据.该算法能够实时、准确地检测全炉膛火焰的燃烧状况和炉膛中心火焰偏移情况,为...     

基于SNR的烟幕干扰效果仿真

烟幕对红外等电磁波具有吸收、反射和散射特性,可导致导引头上接收的能量大大衰减,从而降低导弹的命中概率.针对外场烟幕性能测试受气象条件和环境因素的影响较大,对准确评估抗红外烟幕遮蔽性能存在较大困难的情况,结合气象条件从烟幕透过率的变化引起导引头信噪比变化的角度,建立了烟幕干扰效果的评估模型,通过计算机仿真,得出了烟幕对红外制导导弹的干扰效果.通过试验对其中的一些结论进行了实验验证,结果表明计算结果能够与实验数据较好吻合.     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

水下声源引起的水表面横向微波的理论研究

利用水下声信号在水表面引起的水表面横向微波振幅很小的条件,将普遍的流体力学方程线性化,推导出在水下点声源的激励下,水表面产生的二维横向微波色散关系以及波的传播形式。结果表明,二维水表面的横向微波具有和一维情况类似的结果,即具有波长短、传播速度小的特点,因而可以对入射到表面的激光束进行调制,为水下声信号检测奠定了理论基础。     

一种面向复杂地理空间栅格数据处理算法并行化的任务调度方法

随着并行计算技术的成熟,地理空间栅格数据处理算法的并行化研究成为新的热点。聚焦于处理流程包含多个计算步骤的复杂地理空间栅格数据处理算法,基于空间计算域理论,提出了一个随着算法处理流程而动态变化的任务调度方法。实验证明,该方法在算法流程的每一个计算步都会调整任务分组方案,因此相比于传统任务调度方法,任务调度的负载均衡效果更好,并行算法程序的运行时间更短。