一种新的保持分形特征的分形变形方法

针对IFS吸引子变形过程中间出现的分形特征退化的问题,提出基于局部吸引子的近似凸包及旋转匹配的特征对应方法.IFS吸引子的局部吸引子可由独立的IFS生成,IFS中每个压缩仿射映射存在不动点,构造所有不动点的凸包,即得到局部近似凸包;证明了局部近似凸包间的相似对应等价于局部吸引子间的相似对应,并提出了通过旋转匹配的特征对应方法实现局部近似凸包的配对,最后计算所有配对下相似度最高的一组局部近似凸包匹配,确定局部吸引子间的特征对应,即IFS特征对应.对两个IFS进行线性插值可实现保持分形特征的分形变形.     

考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型。根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法。该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等因素之间的量化关系,可以用于预测均匀腐蚀条件下船体结构寿命,也可以反过来指导腐蚀防护系统设计指标的选择和船体结构维修策略的确定。     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Some aspects in estimating warranty and post‐warranty repair demands

When customers buy a product, they are often eligible for free repairs for a certain warranty period. In this article, we study some important aspects, which are often overlooked in the literature but are of interest to the manufacturer, in estimating both warranty and post‐warranty repair demands. We consider that the installed base of the product (i.e., the number of units of the product actually in use) varies with time due to both new sales and units being taken out of service. When estimating warranty and post‐warranty repair demands, we explicitly address the fact that customers may not always request repairs for failed units. For the case where the product failure time distribution is exponential, we derive the closed‐form expressions for both types of repair demands of a single unit and of the time‐varying installed base. The insights into some risk‐related quantities are also presented. Furthermore, the proposed model is extended by considering delayed warranty claims that are frequently seen in practice. Numerical examples illustrate that understanding both types of repair demands and the related decision variables is important for managing the obligatory and profitable repair services. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 499–511, 2013     

基于可用度仿真分析的装备修理级别确定方法

针对通过更换备件完成修复性维修且常年担负战备的新型武器装备修理级别问题,建立基于使用可用度仿真分析的修理级别分析模型。以地空导弹装备为例,重点仿真分析中继级修复比例、送修率和远程支援技术因子3个指标,定量分析表明使用可用度与3个指标的比例关系,从而可根据使用可用度要求确定该系统修复性维修的修理级别。给出了修复性维修的修理级别分析方法和流程,实例验证了该模型的准确性和可行性。     

Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.     

基于两阶段算法的半潜维修船功能舱室布局

以维修舱空间、舱室邻接、舱室全局位置三个指标为目标函数,以满足高初稳性要求、保证船舶浮态等为约束条件,建立技术可行前提下半潜维修船功能舱室布局优化模型。通过设计贪婪取走启发式算法与规划求解相结合的两阶段算法,实现对模型的求解。以载重为5×10~4 t的半潜船体为载体进行设计,得到半潜维修船功能舱室优化布局方案。随着维修设备质量系数的增加,可行的布局方案数呈上升趋势。该方法可提高半潜维修船在功能舱室布局过程中决策的科学性。     

碳纤维/双马来酰亚胺复合材料修复性能

为了得到碳纤维/双马来酰亚胺复合材料最佳修复效果,采用碳纤维/环氧复合材料和环氧胶膜作为修复材料,对带Φ15 mm和Φ5 mm预制孔碳纤维/双马来酰亚胺复合材料进行单面贴补、双面贴补和单面阶梯挖补修复。研究了补片长度、厚度和铺层顺序对修复效果的影响,并结合修复试样的拉伸断裂模式,优化了修复参数。结果表明:补片边缘母板中存在的应力集中和厚度方向拉伸应力是导致母板断裂的关键原因;双面贴补修复试样拉伸强度能恢复到完好试样的90%以上,单面贴补和阶梯挖补修复试样拉伸强度能恢复到完好试样的80%以上。