基于TCP协议的远程控制系统网络时延仿真研究

为了能够在同一网络环境下对远程控制系统进行研究,使用结构数组对网络时延进行了仿真。将数据报的信息存放在与其网络时延相对应的结构数组元素中,在每个采样点系统只使用结构数组相应元素中的信息,实现对网络时延的仿真。在基于时间驱动工作方式的控制系统中,可以采用这样的方法进行网络时延仿真。     

指挥机构人员等级结构评估方法

指挥机构是战争中的头脑,结构优化、职责分明、衔接紧密是指挥机构首要的要求.为了使指挥机构在等级调整中仍然保持相对的稳定,确定合适的进入机构系统的人员比例,是需要解决的问题.依据机构人员级别调整运行的普遍规律,对进出机构系统的人员等级结构进行建模,分析机构人员等级结构达到稳定的条件,运用递推的方法,求得在稳定的条件下应调入机构的各个等级人员比例,并按达到稳定结构的顺序对机构进行评估.     

Influence of a liquid-filled compartment structure on the incoming shaped charge jet stability

Liquid-filled compartment structure consists of a bulk steel plate with matrix blind holes which are filled with liquid and a steel front plate to seal up the liquid with rings and bolts.The liquid-filled compart-ment structure can resist the shaped charge warhead effectively.This paper presents experimental and theoretical investigations of the penetration ability of the residual shaped charge jet emerging from the liquid-filled compartment structure after the penetration process at different impact angles.On the basis of shock wave propagation theory,the influence of the liquid-filled compartment structure on jet sta-bility is analysed.The interferences of the liquid backflow caused by a reflected shock wave and a back plate on jet stability under different impact angles are also examined.In addition,the range of the disturbed velocity segments of the jet at different impact angles and the penetration ability of the re-sidual jet are obtained.A theoretical model is validated against the experimental penetration depths.     

深水环境下潜艇舯部结构撞击强度数值分析

潜艇结构水下碰撞是潜艇的主要事故形式,也是船舶碰撞最为危险的状态之一。文中首先提出潜艇碰撞问题,对碰撞特征进行分析,然后针对某型潜艇舯部典型结构的撞击极限强度特性进行数值计算,结果显示,由于准静压载荷的附连耦合作用,随着静水压力的增加,潜艇舯部耐压壳体结构的防撞能力将大幅下降,而耐压壳体内部平台和舱壁结构将有效提高壳体结构的横向失稳临界应力,改善潜艇结构的径向耐撞能力。     

基于高层滑模的导弹电液伺服机构模糊滑模控制

针对导弹电液伺服机构的跟踪控制问题,设计了一种模糊滑模控制方案。将高层滑模函数作为模糊控制系统的一维输入,简化了一般模糊滑模控制系统结构,从而得到具有少量规则的模糊滑模的设计方案。仿真结果表明了该方案可以减小跟踪误差,增强系统的鲁棒性和削弱控制信号中的高频抖振。     

Optimal joint preventive maintenance and production policies

We study joint preventive maintenance (PM) and production policies for an unreliable production‐inventory system in which maintenance/repair times are non‐negligible and stochastic. A joint policy decides (a) whether or not to perform PM and (b) if PM is not performed, then how much to produce. We consider a discrete‐time system, formulating the problem as a Markov decision process (MDP) model. The focus of the work is on the structural properties of optimal joint policies, given the system state comprised of the system's age and the inventory level. Although our analysis indicates that the structure of optimal joint policies is very complex in general, we are able to characterize several properties regarding PM and production, including optimal production/maintenance actions under backlogging and high inventory levels, and conditions under which the PM portion of the joint policy has a control‐limit structure. In further special cases, such as when PM set‐up costs are negligible compared to PM times, we are able to establish some additional structural properties. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

我国钢结构耐火设计方法评述

分析并指出了我国现行钢结构耐火设计方法的缺点,建议采用性能化设计方法以提高钢结构耐火设计的可靠度。     

SCB型钢结构防火涂料热分解动力学模型研究

用热重法(TG)对SCB型钢结构防火涂料的热分解过程进行了分析,并用微分法中的Achar法对热分解的数据进行处理,用多种机理方程进行了拟合,发现SCB型防火涂料的热分解可分为四个阶段:第一阶段热分解属于随机核化,第二、第三、第四阶段热分解属于三维扩散,球形对称机理。     

光学表面的分形特点与模拟表征算法

根据光学表面在微观结构呈现出的自相似性,利用尺度无关的分形模型描述了其结构特征;采用结构函数法对抛光表面的分形维数进行计算,分析了粗糙度参数RMS值、误差波长、测量尺度、采样长度和采样点数对分形维数的影响规律。在此基础上,提出了采用一阶自回归分形模型对抛光表面进行模拟的新方法,分析了界定尺度、模型参数对分形特征和分形维数的影响规律。利用分形维数描述光学表面的微观结构具有评价方法简单、在一定范围内与测量尺度无关等优点。     

冲击波活化热压烧结氮化硅粉末

对Si3 N4粉末实现了三种不同压力的冲击波预先处理 ,而后采用三种不同的热压烧结条件制得Si3 N4陶瓷。运用SEM ,TEM ,HRTEM和XRD等手段分析了粉末和陶瓷的结构特性 ,同时测试了材料的性能。结果表明 :冲击波压力没有导致Si3 N4粉末的相变 ,TEM观察表明Si3 N4晶粒中有大量的位错及位错群 ,冲击波的作用主要是通过引入大量位错和其他缺陷促进致密化过程 ,提高陶瓷材料的机械性能。经过40GPa冲击波活化 1 80 0℃热压烧结的Si3 N4陶瓷性能最好 ,弯曲强度达 1 1 0 7.2MPa ,断裂韧性达 1 2 .2 0MPa .m1/2 。