电传动装甲车辆负载功率预测实时能量管理策略

针对电传动装甲车辆负载功率预测功能缺失导致控制作用滞后的问题,提出一种具有较高负载功率预测精度的实时能量管理策略。在分析整车结构的基础上,采用理论分析和数据拟合方法,建立各动力源数学模型。将差分自回归移动平均模型和自适应马尔可夫链两种预测方法相结合,设计非平稳趋势性负载功率组合预测方法。在非线性模型预测控制框架下,构建多目标优化函数,采用序列二次规划法在有限时域内实时求解最优控制指令,优化多动力源协调控制过程。依托硬件在环仿真平台进行多路面行驶实验,对比有无功率预测的能量管理控制效果。结果表明,改进的实时能量管理策略对未来负载功率具有较好的预见性,能够显著优化多动力源协调控制过程,提升车辆燃油经济性,稳定母线电压和电池荷电状态,对传统模型预测控制下的工程应用场景具有一定借鉴意义。     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

水雾扩散模型仿真

建立水雾红外衰减模型时,通常把水雾空间看作单一均匀整体处理,然而雾滴的扩散现象使水雾的雾滴密度无法保证处处相等,所以仿真结果与实际情况相比普遍存在较大偏差。针对这一问题,基于高斯扩散理论与Mie散射理论,提出了一种新的建模方案。通过将水雾空间划分为多个子空间,并计算每个子空间内水雾消光性能的建模方法,提高建模的准确性。同时结合红外制导导弹来袭的方向变化,计算出不同方向上的水雾消光性能。从仿真结果可以看出,这种建模方式能够很好地克服以往建模方法的缺陷,为探索水雾的精确建模提供了一种新思路。     

Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

An artificial neural network (ANN) constitutive model is developed for high strength armor steel tempered at 500 °C, 600 °C and 650 °C based on high strain rate data generated from split Hopkinson pressure bar (SHPB) experiments. A new neural network configuration consisting of both training and validation is effectively employed to predict flow stress. Tempering temperature, strain rate and strain are considered as inputs, whereas flow stress is taken as output of the neural network. A comparative study on Johnson–Cook (J–C) model and neural network model is performed. It was observed that the developed neural network model could predict flow stress under various strain rates and tempering temperatures. The experimental stress–strain data obtained from high strain rate compression tests using SHPB, over a range of tempering temperatures (500–650 °C), strains (0.05–0.2) and strain rates (1000–5500/s) are employed to formulate J–C model to predict the high strain rate deformation behavior of high strength armor steels. The J-C model and the back-propagation ANN model were developed to predict the high strain rate deformation behavior of high strength armor steel and their predictability is evaluated in terms of correlation coefficient (R) and average absolute relative error (AARE). R and AARE for the J–C model are found to be 0.7461 and 27.624%, respectively, while R and AARE for the ANN model are 0.9995 and 2.58%, respectively. It was observed that the predictions by ANN model are in consistence with the experimental data for all tempering temperatures.     

云模型在雷达干扰资源多目标优化配置中的应用

鉴于干扰效果/效益评估在雷达干扰资源优化分配中的重要地位,提出了一种基于云模型和匈牙利算法的雷达干扰资源优化分配模型。利用一维云模型单条件单规则发生器和逆向云发生器构建了评估指标干扰效果推理器,利用基于风险态度因子的云模型映射函数定义了云模型之间距离的度量方法。提出了一种基于云模型与逼近理想解法的雷达干扰效益矩阵求解方法,最后运用匈牙利算法实现了干扰资源优化分配。将所建模型应用到干扰资源分配中,结果表明该模型能够较好的处理评估中的不确定性知识,是合理、可行的。     

基于概率图模型的海上多目标跟踪

针对海上复杂环境中多运动目标跟踪问题,提出了一种融合概率图模型和粒子滤波的跟踪方法.该方法采用二元马尔可夫随机场构建多目标模型,利用势函数表示其联合概率分布,最后用变差分法和粒子滤波推理后验概率密度.通过二阶回归模型准确构建状态转移方程,以及Mean-Shift迭代加速粒子采样,提高了算法精确度和运行效率.实验表明:该方法能很好地实现海上复杂环境中的多目标实时跟踪.     

考虑地磁场空间梯度的飞行器磁干扰建模与求解方法

首先,在研究飞行器背景磁干扰模型与小信号模型的基础上,分析了地磁梯度沿纬度与高度的变化规律,分析可知由于飞行器的机动,地磁梯度会对测量结果造成影响;然后,考虑地磁梯度因素,对原有小信号模型求解方法进行了改进：飞行器在四个航向上做小角度的机动飞行,将地磁场沿纬度与高度的梯度作为未知量,与飞行器磁干扰模型中的剩磁参数、感磁参数和涡磁参数一起求解;最后,利用实测试验数据进行了验证,结果表明：考虑地磁梯度的影响与不考虑地磁梯度的影响相比,求解的模型参数可以在细节上进一步提高飞行器背景磁干扰的补偿效果。     

微槽结构单点金刚石飞切加工的切削力建模

超精密单点金刚石飞刀切削技术是一种比较新颖的微槽类结构加工方式。在飞切过程中,切削力是切削过程中重要的物理量,对加工后的表面质量、刀具磨损等有着直接影响。提出了一种基于直角微切削理论的动态微槽类结构飞切的力学模型,基于微切削理论,得到了前、后刀面切削力的理论模型。根据飞切的几何运动特征,建立了飞切过程中剪切角的计算模型,并根据单圈飞切实验得到了飞切过程中剪切面的变化规律。为了验证模型的正确性,采用不同切削参数进行了多圈重叠飞切实验,对切削力进行了测量和分析。实验得到的切削力大小和变化规律与理论模型计算得到的基本一致,证明了该切削力模型的有效性。