复杂电磁环境下的电磁频谱管理效能评估研究

针对复杂电磁环境下的电磁频谱管理效能评估问题,提出一套系统地效能评估方法.首先对效能评估的指标体系进行了分析,然后提出了一种多模型混合的效能评估方法,最后对整个过程中效能评估的流程进行研究.通过实例仿真研究表明,该方法可以有效地对复杂电磁频谱下的电磁频谱管理效能进行评估.     

S模糊集与故障树复合分析

运用模糊集评价和概率估计提出一种故障树复合分析方法来评价非常事件,使传统的故障树分析中,类似人为错误的模糊、不精确事件得到有效地处理。     

样条函数康特诺维奇杂交元法在复合材料板弯曲中的应用

本文通过修正余能原理,用三次B 样条函数对应力和位移场进行插值,提出一种新的杂交元,应用离散的康特诺维奇法解决了金属和复合材料的弯曲问题。该法具有收敛快、计算精度高、处理边界条件方便的特点,能得到与位移同一精度的应力解,而且不存在多余零能模式和闭锁问题,是一种解决板弯曲问题的行之有效的计算方法。     

基于拉盖尔模型的超声信号渡越时间测量性能分析

传统窄带模型仅能通过数值计算统计出超声信号渡越时间的测量性能。针对这一问题,提出基于拉盖尔模型计算理论克拉下限的方法。研究了拉盖尔函数及其时间导数的性质,得到时间导数内积矩阵,并将其应用到费舍尔矩阵中,能够快速精确计算克拉下限。对混合指数模型仿真表明,在高斯白噪声背景下,渡越时间方差与理论克拉下限具有良好的一致性;受窄带噪声和反射等因素影响,实测数据的渡越时间方差与理论克拉下限存在较大偏差。     

The properties of Sn–Zn–Al–La fusible alloy for mitigation devices of solid propellant rocket motors

The Al and La elements are added to the Sn9Zn alloy to obtain the fusible alloy for the mitigation devices of solid propellant rocket motors. Differential scanning calorimetry (DSC), metallographic analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), tensile testing and fracture analysis were used to study the effect of Al and La elements on the microstructure, melting characteristics, and mechanical properties of the Sn9Zn alloy. Whether the fusible diaphragm can effectively relieve pressure was investigated by the hydrostatic pressure at high-temperature test. Experimental results show that the melting point of the Sn9Zn-0.8Al0·2La and Sn9Zn–3Al0·2La fusible alloys can meet the predetermined working temperature of ventilation. The mechanical properties of those are more than 35% higher than that of the Sn9Zn alloy at −50 °C–70 °C, and the mechanical strength is reduced by 80% at 175 °C. It is proven by the hydrostatic pressure at high-temperature test that the fusible diaphragm can relieve pressure effectively and can be used for the design of the mitigation devices of solid propellant rocket motors.     

丁羟（HTPB）推进剂老化研究（IV）——过氯酸铵（AP）粒度对老化性能的影响

本文研究了HTPB/AP推进剂中AP粒度对推进剂老化性能的影响。实验是在90℃的空气中进行的。老化性能以推进剂的拉伸性能、邵氏硬度,失重%和燃烧速度等参数为判据,并以DSC图谱作参考。实验结果表明:HTPB/AP推进剂中AP粒度的减小,有助于推进剂贮存老化性能的提高。各种粒度AP的DSC图谱,也进一步证实了这一结论。     

发射装药非稳态温度场仿真

弹药在长期贮存过程中,极易受环境温度和湿度的作用,使发射装药出现热分解、裂解、结霜等,严重影响弹药装药的贮存可靠性;在射击试验中,发射药温度也会对弹道性能产生极大的影响。由于不允许对弹药进行破坏性开孔,因此借助Ansys的热分析模块,对发射装药非稳态温度场进行仿真研究,获取发射装药在不同环境条件下的温度场及不同节点的温度变化规律,为弹药的贮存、试验提供一定的参考价值。     

Investigation on the foaming behaviors of NC-based gun propellants

To prepare the porous NC-based (nitrocellulose-based) gun propellants, the batch foaming process of using supercritical CO₂ as the physical blowing agent is used. The solubilities of CO₂ in the single-base propellants and TEGDN (trimethyleneglycol dinitrate) propellants are measured by the gravimetric method, and SEM (scanning electron microscope) is used to observe the morphology of foamed propellants. The result shows that a large amount of CO₂ could be dissolved in NC-based propellants. The experimental results also reveal that the energetic plasticizer TEGDN exerts an important influence on the pore structure. The triaxial tensile failure mechanism for solid-state nucleation is used to explain the nucleation of NC-based propellants in the solid state. Since some specific foaming behaviors of NC-based propellants can not be explained by the failure mechanism, a solid-state nucleation mechanism which revises the triaxial tensile failure mechanism is proposed and discussed.     

Banach空间中严格拟伪压缩映像族公共不动点的迭代算法

根据Banach空间中严格拟伪压缩映像不动点的迭代格式,将其扩充到无穷多个严格拟伪压缩映像族公共不动点的迭代算法,证明其强收敛定理,扩展了已知的相关结果．     

关于Smarandache序列Pd（n）和qd（n）的均值估计

对任意正整数n,Pd（n）定义为n的所有正因子的乘积,gd（n）定义为n的所有小于n的正因子的乘积。若n=p1^a1p2^a2…px^as是n的标准分解式,算数函数Ω（n）=a1＋a2＋…＋as。用解析的方法研究关于Smarandache序列Pd（n）、qd（n）与Q（n）的混合均值,并给出两个较好的渐近公式。