涡轮泵故障检测的频段能量比SOM算法

为了解决缺少故障样本情况下的涡轮泵健康状态判别问题,分析了涡轮泵振动信号的频谱,提取了频段能量比作为其故障检测特征,并讨论了自组织映射的竞争学习原理及聚类结果的U-矩阵表示,提出了一种基于频段能量比的自组织映射故障检测算法,并实现了该算法最佳匹配神经元的选择和权重向量的自适应更新。通过某型液体火箭发动机历史试车数据的验证,结果表明,健康涡轮泵数据利用该算法聚类时仅存在一个类别,相邻神经元距离小于0.1;反之,故障涡轮泵数据利用该算法聚类时明显存在两个或多个类别,且相邻神经元的最大距离大于0.1。因此,基于频段能量比的SOM算法能有效地判别涡轮泵的健康状况。     

某型火箭弹电点火系统雷电辐照效应研究

利用LSG-8015型雷电浪涌发生器与平行板传输线配合模拟雷电电磁脉冲辐射场,对整装状态下水平放置的某型火箭弹进行了辐照试验。比较了不同放电电压下某型火箭弹电点火系统的感应电压波形,试验了短路防护卡对雷电电磁脉冲的防护性能,提出了某型火箭弹雷电电磁脉冲防护的思路和方法。     

某型火箭弹安全发射静电防护设计

在分析了电子发火机电路系统工作原理的基础上,对电子发火机部分电路系统进行改进设计,使装填到火箭炮上的火箭弹在新点火电路系统下,两极间产生一条短路通道,具有了短路保护功能。计算结果表明,此设计增强了火箭弹的抗静电能力。     

预燃室内气氢气氧射流燃烧过程数值分析

建立了液体火箭发动机预燃室内气氢气氧射流燃烧过程的数学模型,包括燃烧过程控制守恒方程、湍流流动方程和湍流燃烧模型,以及求解控制方程所需的辅助关系式;给出了模拟射流燃烧过程的数值方法。对于给定的预燃室结构型式和尺寸,研究了喷嘴构型和氧的喷射方式对化学反应流场和燃烧性能的影响规律。结果表明,喷嘴构型和氧的喷射方式对流动过程和燃烧性能都有影响,且喷嘴结构的影响较为明显。     

基于模糊模型的发动机部件级故障隔离方法研究

发动机故障诊断与故障隔离是发动机健康监控领域的一大难题,但对发动机故障定位、预防灾难性事故发生及发动机维修意义重大。为了准确地确定故障发生的部位,本文针对某型液体火箭发动机,提出一种基于模糊模型的部件级故障隔离方法。首先对发动机系统进行部件的划分,然后建立各个部件的模糊模型并进行训练,最后按照设定的故障检测与隔离策略对故障进行诊断。利用两组发动机故障仿真数据对基于模糊模型部件级故障隔离方法进行验证,结果表明:本方法可以实现单一或多个部件故障隔离。     

围压下固体推进剂的破坏机理分析

贴壁浇筑的固体发动机推进剂药柱在点火状态下处于三向围压状态,而环向承受拉应变,亟待对围压下推进剂的破坏机理展开研究。基于自研的围压加载试验系统,通过开展推进剂在不同围压、温度和应变率下的单轴拉伸试验来研究围压、温度和应变率的耦合作用对推进剂力学行为的影响。针对围压下推进剂的力学响应特征,通过细观力学仿真进一步研究围压下推进剂的破坏形式,同时借助电镜扫描试验分析推进剂试样断面的形貌特征,通过试验和仿真相结合的手段分析了围压下推进剂的破坏机理。研究结果表明,围压下推进剂的损伤界面显著减少,且随着围压载荷的逐渐增加,推进剂的损伤形式从以颗粒脱湿为主转变为以颗粒破碎为主。     

Controllable combustion behaviors of the laser-controlled solid propellant

Microsatellites have been widely applied in the fields of communication,remote sensing,navigation and science exploration due to its characteristics of low cost,flexible launch mode and short development period.However,conventional solid-propellant have difficulties in starting and interrupting combustion because combustion is autonomously sustained after ignition.Herein,we proposed a new type of solid-propellant named laser-controlled solid propellant,which is sensitive to laser irradiation and can be started or interrupted by switching on/off the continuous wave laser.To demonstrate the feasibility and investigate the controllable combustion behaviors under different laser on/off conditions,the combus-tion parameters including burning rate,ignition delay time and platform pressure were tested using pressure sensor,high-speed camera and thermographic camera.The results showed that the increase of laser-on or laser-off duration both will lead to the decrease of propellant combustion performance during re-ignition and re-combustion process.This is mainly attributed to the laser attenuation caused by the accumulation of combustion residue and the change of chamber ambient temperature.Simultaneously,the multiple ignition tests revealed that the increased chamber ambient temperature after combustion can make up for the energy loss of laser attenuation and expansion of chamber cavity.However,the laser-controlled combustion performance of solid propellant displayed a decrease trend with the addi-tion of ignition times.Nevertheless,the results still exhibited good laser-controlled agility of laser-controlled solid propellant and manifested its inspiring potential in many aspects of space missions.     

Formulation development and characterization of cellulose acetate nitrate based propellants for improved insensitive munitions properties

Cellulose acetate nitrate (CAN) was used as an insensitive energetic binder to improve the insensitive munitions (IM) properties of gun propellants to replace the M1 propellant used in 105 mm artillery charges. CAN contains the energetic nitro groups found in nitrocellulose (NC), but also acetyl functionalities, which lowered the polymer's sensitivity to heat and shock, and therefore improved its IM properties relative to NC. The formulation, development and small-scale characterization testing of several CAN-based propellants were done. The formulations, using insensitive energetic solid fillers and high-nitrogen modifiers in place of nitramine were completed. The small scale characterization testing, such as closed bomb testing, small scale sensitivity, thermal stability, and chemical compatibility were done. The mechanical response of the propellants under high-rate uni-axial compression at, hot, cold, and ambient temperatures were also completed. Critical diameter testing, hot fragment conductive ignition (HFCI) tests were done to evaluate the propellants' responses to thermal and shock stimuli. Utilizing the propellant chemical composition, theoretical predictions of erosivity were completed. All the small scale test results were utilized to down-select the promising CAN based formulations for large scale demonstration testing such as the ballistic performance and fragment impact testing in the 105 mm M67 artillery charge configurations. The test results completed in the small and large scale testing are discussed.     

固冲发动机进气道工作过程干扰因素

分析了固冲发动机进气道、补燃室、尾喷管一体化流场中,在不同干扰因素下的进气道工作过程,研究了进气道出口燃气压力在时间上和空间上的突变以及尾喷管喉径的突变对进气道内部流动过程的影响,得到了不同干扰因素下的进气道工作特性.结果表明:进气道出口燃气压力在时间上的突变容易引起进气道出口燃气反压分布不均;进气道内流场对压力空间突...