水解法测定发射药钝感剂浓度分布实验条件优化

对水解法测定发射药中钝感剂浓度分布实验条件进行了优化。结果表明,包覆材料选用氯丁橡胶胶粘剂效果最好;水解在沸碱液中进行时,残药表面光滑且能提高测试效率;残药干燥条件为:在100℃干燥20 m in。     

远程火箭弹滑翔增程技术研究

基于火箭弹滑翔增程技术中采用的控制导弹法向过载和保持升阻比最优的2种滑翔控制方案,建立了滑翔弹道模型,分析了2种不同控制方案的约束条件,并进行了全弹道仿真,计算了不同下滑点对弹道增程的影响,为增程弹道控制方案的选择提供了依据.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

NEPE类推进剂燃烧模拟

在分析、研究硝胺和AP CMDB推进剂燃烧模型的基础上,结合NEPE类推进剂的配方和燃烧性能特点,建立了NEPE类推进剂燃烧的物理模型,并进行了燃速和压强指数的理论计算。结果表明,几乎100%的计算结果都在实验值的±10%范围内。这说明所建立的模型基本合理,编制的NEPE类推进剂燃速计算程序基本可行。     

炮兵射击中若干“异常”现象的外弹道原理

在我军炮兵部队实弹射击实践和武器装备的射击试验中,经常出现一些与直觉不一致的所谓"异常"现象,困扰着部分炮兵指挥员和战斗人员.这些异常现象看似偶然且十分反常,实际上从外弹道理论上都是可以得到解释,而且是必然的.精心选取几个最常见的异常现象进行详细分析,以期为炮兵指挥员和战斗人员提供参考.     

气象探测火箭发射用软件射表

在气象探测火箭发射之前需要根据实测风场 ,应用射表对火箭飞行弹道进行“风修”。传统射表在风修精度和通用性等方面存在不足。软件射表具有明显优势 ,它基于弹道数值仿真及迭代搜索技术 ,根据火箭分离技术要求和实测风场条件 ,确定出火箭发射角并及时预示飞行弹道。与传统射表相比 ,软件射表具有更高的风修计算精度及通用性 ,并省去了繁杂的射表编制工作     

变化风场对气象火箭射高的影响

建立了变化风场的气动力模型 ,讨论了风梯度的气动力效应。对气象火箭在弹道风和变化风场中的飞行轨迹进行了数值仿真。计算结果表明 :该模型正确合理 ,与实际飞行结果吻合好。     

发动机内流场湍流数值模拟

以可压缩的全Ｎ－Ｓ方程为控制方程,用显式有限差分格式对燃烧室－－喷管轴对称湍流内流场进行了数值模拟。计算中采用ＭａｃＣｏｒｍａｃｋ两步显格式和Ｂａｌｄｗｉｎ－Ｌｏｍａｘ代数湍流模型,得到了管状装药发动机内流场的数值解,取得了令人满意的结果。此方法对发动机的设计有实际的工程参考价值。     

火箭发动机燃烧室内气体非定常流动数值模拟

应用新的ＰＩＳＯ算法对液体火箭发动机内非定常流动过程进行了数值模拟计算。算法采用一步隐式预测、两步显式校正完成每一时间层计算,而不是通常的多次迭代计算,因而大大缩短计算时间。