排序方式: 共有121条查询结果,搜索用时 156 毫秒
111.
在将子弹均匀散布的椭圆区域等效转换为矩形区域的基础上,建立了适宽射向射击子母弹对矩形目标毁伤全概率计算的数学模型。通过函数转换和泛函分析给出了子弹均匀散布子母弹理想射击密度,得到了理想射击密度下对目标的毁伤概率计算公式。讨论了最有利火力分配方式的确定方法,给出了最优射向间隔和表尺差的计算公式,为便于实际应用,给出了最优火力分配计算中所需的3个参数的近似计算公式,最后给出了应用算例。 相似文献
112.
113.
张培忠 《海军工程大学学报》2006,18(4):45-50
在火炮发射隐身榴弹过程中,由于隐身榴弹的静不平衡、动不平衡,造成隐身榴弹在膛内运动过程中碰撞膛线,其表面涂敷的吸波材料将承受较大的接触力.发射过程中应保证不损伤吸波材料表面,确保吸波材料具有良好的吸波性能、不增加隐身榴弹的雷达散射截面.从理论上计算了隐身榴弹与膛线之间的接触力,为研制隐身榴弹用的抗压吸波材料提供了设计指标. 相似文献
114.
115.
116.
脱壳弹的弹托分离过程对弹体的飞行稳定性和打击效能具有显著的影响。针对脱壳弹出膛后弹托相对弹体的六自由度运动过程,提出采用基于双目视觉原理的弹托分离角测量方法。通过在弹体表面和弹托表面设置标记点,采用图像处理和跟踪算法实现对标记点的识别和跟踪。结合双目空间标定参数解算出标记点的空间位置,进而获得弹托相对弹体的分离角度,同时采用实验验证了上述测量方法的精度,其精度达到2%。以实验室进行的初速度1 550 m/s和1 750 m/s的脱壳弹射击试验为例,测量并分析了不同初速度下的弹托分离轨迹。结果表明:脱壳弹分离初速度越快,弹托分离轨迹越靠近弹体。 相似文献
117.
为了研究钻地武器的侵彻性能,在57mm口径的气炮上发射长杆射弹对三种靶体进行模拟侵彻实验。靶体为水泥砂浆石靶、钢纤维混凝土靶和含单层密排刚玉球的钢纤维混凝土靶。实验结果表明,弹头形状对侵彻深度有明显影响;当长杆射弹和撞击速度都相同时,与侵彻钢纤维混凝土靶相比,含单层密排刚玉球的钢纤维混凝土靶中的侵彻深度大约降低了11%,而水泥砂浆石靶中的侵彻深度增加了12%。 相似文献
118.
以多爆炸成型弹丸(MEFP)为计算模型,应用显式有限元程序LS-DYNA,分析了药型罩间距、锥角、壁厚、装药高度和装药直径5种因素对MEFP发散角的影响规律。结果表明:随着药型罩间距、壁厚和装药直径的增加以及药型罩锥角、装药高度的减小,MEFP的发散角在减小。在此基础上以MEFP发散角为命中和毁伤概率指标,应用正交优化方法针对5种结构因素对MEFP发散角的影响主次关系进行了分析研究。结果表明药型罩壁厚是MEFP战斗部命中和毁伤概率的主要影响因素,并得到了5种结构因素各水平的最优组合。 相似文献
119.
120.
Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect. 相似文献