关联网络中的级联失效模型与分析

网络之间的关联依赖关系能使某一网络内的级联失效扩散至其他网络,其本质是位于不同网络的关联节点之间基于功能依赖的相关失效.以两个关联的网络为对象,建立关联网络模型,提出了一种关联网络的级联失效模型.模型将关联网络中的级联失效分解为网络内级联失效和网络间级联失效,并采用了基于度的级联规模评价方法.利用模型研究了两个关联无标...     

提高外训工作水平必须把握好的几个问题

结合我院多年来外训工作的经验,从新时期外训工作提出的更高要求出发,论述了外训工作的重要地位和作用,强调了外训工作的特殊性,提出了外训工作应把握的正确方向,阐述了外训发展中必须处理好的几个关系.     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

关于小尺寸装药用炸药薄膜的研究

利用真空蒸镀技术对太安炸药薄膜及其在小尺寸装药上的应用进行了研究。实验表明利用真空蒸镀技术可以研制出性能优良的炸药薄膜 ;红外光谱分析证明太安在蒸镀前后没有发生质的变化 ;扫描电镜分析得出了太安薄膜的微观结构 ;太安炸药薄膜在小尺寸装药上的应用表明了该装药具有可靠的传爆功能。     

基于改进差分进化算法的内弹道参数优化

火炮内弹道参数直接影响其计算结果,内弹道参数优化设计是内弹道分析计算的重要环节。基于经典内弹道计算模型,以火药内弹道计算中最为敏感的燃速指数及其燃速系数为设计参量,以最大膛压及弹丸初速的计算值与测试值一致性为目标,对差分进化算法群体的初始化、变异因子及变异模式进行了改进,对某型火炮的内弹道参数进行了优化计算。优化设计结果表明改进后的差分进化算法满足内弹道设计工程实践要求,为内弹道参数优化设计提供了一种有效的算法。     

含脱粘界面颗粒增强金属基复合材料局部应力场的尺度效应

在通过三相胞元方法求解出的复合材料有效刚度基础上,将三相胞元置于有效介质氛围中,且有效介质与复合材料具有相同弹性常数;根据有效自洽理论对受单轴拉应力作用的复合材料进行局部应力场分析,理论结果表明：只有考虑存在脱粘界面时,颗粒增强复合材料局部应力场具有明显的尺度效应,其应力值还与脱粘界面含量有关;基体承载的应力要小于外载应力,颗粒内纵向应力要大于外载荷,对基体材料起到了强化的作用,这与实际情况相符合。     

A pixel-level local contrast measure for infrared small target detection

Infrared (IR) small target detection is one of the key technologies of infrared search and track (IRST) systems. Existing methods have some limitations in detection performance, especially when the target size is irregular or the background is complex. In this paper, we propose a pixel-level local contrast measure (PLLCM), which can subdivide small targets and backgrounds at pixel level simultaneously. With pixel-level segmentation, the difference between the target and the background becomes more obvious, which helps to improve the detection performance. First, we design a multiscale sliding window to quickly extract candidate target pixels. Then, a local window based on random walker (RW) is designed for pixel-level target segmentation. After that, PLLCM incorporating probability weights and scale constraints is proposed to accurately measure local contrast and suppress various types of background interference. Finally, an adaptive threshold operation is applied to separate the target from the PLLCM enhanced map. Experimental results show that the proposed method has a higher detection rate and a lower false alarm rate than the baseline algorithms, while achieving a high speed.     

压力喷嘴常温下雾化特性实验研究

为了满足工程中对喷嘴雾化特性测量的高精度、低成本要求,建立了喷嘴雾化特性实验系统,以自来水为雾化工质,对蒸发冷却压力喷嘴在常温、常压下的雾化特性进行了实验研究。用容积法测量了喷嘴的流量,用最小二乘法对测量数据进行回归分析,得到了喷嘴流量、雾化压力和喷孔直径之间的关联式与流量系数;用机器视觉方法测量了喷嘴的雾化锥角与雾滴尺寸,得到了雾化锥角与雾滴尺寸随雾化压力变化的规律。结果表明:随着雾化压力的增大,喷嘴雾化锥角不断增加,雾滴尺寸不断减小;随轴向距离的增大,D0.632、D0.5、D32有不同幅度的增大,而D0.9则基本不变。     

Warehouse sizing to minimize inventory and storage costs

This paper considers a warehouse sizing problem whose objective is to minimize the total cost of ordering, holding, and warehousing of inventory. Unlike typical economic lot sizing models, the warehousing cost structure examined here is not the simple unit rate type, but rather a more realistic step function of the warehouse space to be acquired. In the cases when only one type of stock‐keeping unit (SKU) is warehoused, or when multiple SKUs are warehoused, but, with separable inventory costs, closed form solutions are obtained for the optimal warehouse size. For the case of multi‐SKUs with joint inventory replenishment cost, a heuristic with a provable performance bound of 94% is provided. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 299–312, 2001