一体化射频通信体系对抗的仿真系统设计

简要介绍了射频通信体系对抗仿真中的模型,一体化建模方法.以红方对蓝方通信进行干扰为例分析了通信体系对抗仿真的功能模块,提出了对抗框架.介绍了几种常用的干扰方法,提出对抗的方法和策略,并通过实例说明通信体系对抗的方法和策略.     

导弹子母弹战斗部对复杂目标毁伤的计算机仿真

介绍了蒙特卡洛方法(Monte-Carlo)仿真的基本原理,并运用该方法对导弹子母弹战斗部对复杂目标毁伤进行研究,利用Matlab语言编制仿真程序实现了计算机仿真.有效地解决了其他方法计算繁琐的弊端,大大提高了毁伤仿真的计算效率.仿真结果表明应用该方法建模技术简洁,模型的通用性好,并能够随时根据需求进行功能扩展.     

某雷达装备虚拟训练系统实现技术

从实际装备的特点出发,确定了虚拟训练系统的分布式实现模式.以该实现模式为基础,对系统软件结构框架、基于HLA/RTI的分布交互以及虚拟装备的人机交互等关键技术的实现进行了讨论,解决了雷达装备虚拟训练系统的系统集成环境构成、各仿真节点间的分布交互以及人机交互等问题,最后在虚拟训练系统上实现了雷达装备的开关机、跟踪以及故障维修等不同训练功能.     

固体火箭发动机二次喷射控制矢量喷管流场仿真

采用基于Favre平均的三维N-S方程和k-ε湍流模型对固体火箭发动机二次喷射推力矢量喷管复杂干扰内流场进行数值模拟。空间上采用三阶精度差分格式进行求解,时间上采用隐式Jacobi点迭代方法进行迭代推进,直至流场收敛。数值模拟得到矢量喷管二次射流的激波系结构,以及复杂的主/次流干扰流动图像。二次喷射流场包含复杂的涡系结构和波系结构,还存在着边界层与激波的相互干扰、自由剪切层、激波、膨胀波和大尺寸分离。数值模拟还表明,高温燃气射流导致喷射孔附近喷管壁面处的温度相当高,需采取相应的热防护措施。     

可变形定向破片战斗部模型试验和数值模拟研究

基于可变形定向破片战斗部的作用原理,设计了试验结构模型,并对其进行了静爆试验研究。根据试验结果,建立了有限元分析模型,利用LS-DYNA程序对可变形定向战斗部变形过程以及破片的飞散过程进行了数值模拟。结果表明,在目标方向破片密度和速度都有较大幅度增益,数值模拟与试验结果比较吻合。     

Interface defeat studies of long-rod projectile impacting on ceramic targets

The interface defeat phenomenon always occurs when a long-rod projectile impacting on the ceramic target with certain velocity, i.e., the projectile is forced to flow radially on the surface of ceramic plates for a period of time without significant penetration. Interface defeat has a direct effect upon the ballistic performance of the armor piercing projectile, which is studied numerically and theoretically at present. Firstly, by modeling the projectiles and ceramic targets with the SPH (Smoothed Particle Hydrodynamics) particles and Lagrange finite elements, the systematic numerical simulations on interface defeat are performed with the commercial finite element program AUTODYN. Three different responses, i.e., complete interface defeat, dwell and direct penetration, are reproduced in different types of ceramic targets (bare, buffered, radially confined and oblique). Furthermore, by adopting the validated numerical algorithms, constitutive models and the corresponding material parameters, the influences of projectile (material, diameter, nose shape), constitutive models of ceramic (JH-1 and JH-2 models), buffer and cover plate (thickness, constraints, material), as well as the prestress acted on the target (radial and hydrostatic) on the interface defeat (transition velocity and dwell time) are systematically investigated. Finally, based on the energy conservation approach and taking the strain rate effect of ceramic material into account, a modified model for predicting the upper limit of transition velocity is proposed and validated. The present work and derived conclusions can provide helpful reference for the design and optimization of both the long-rod projectile and ceramic armor.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

掠飞末敏弹耦合运动动导数计算

以新型掠飞末敏弹为研究对象,提出了基于欧拉转动定理和滑移网格技术的复杂角运动模拟方法,利用著名的罗德里格斯转换矩阵插值求得弹箭在每个时间步的角速度修正值,并指定给球形滑移网格区。通过对非定常气动参数进行求解辨识,分析了不同马赫数下掠飞末敏弹滚转运动对其俯仰组合动导数和升力系数动导数的影响规律。结果表明:所提角运动模拟方法可有效消除姿态角计算的累积误差,实现对弹箭任意给定角运动的准确模拟;弹箭滚转运动对俯仰组合导数和升力系数动导数的辨识结果均存在显著影响,在进行弹箭动导数计算和稳定性分析时需充分考虑俯仰耦合效应的影响。     

分布式飞行视景仿真平台的设计与实现

基于多机空战战法训练设备的开发,对视景平台的组成、接口、网络结构、运行机制进行了总体设计,构建了一个具有基本仿真功能,并且相对通用的分布式可视化实时视景仿真平台.重点对飞行动力学仿真系统、视景显示系统和接口网络数据驱动进行了研究与实现.为提高平台的通用性和扩展性,采用了仿真控制主机和目标仿真机运行模式.仿真建模(Simulink)、三维建模(creator)和视景驱动(vega+vc)均采用商业软件,降低了平台的开发难度,缩短了开发周期,并且获得了高质量效果.     

基于AOPN的维修保障系统建模与分析方法

提出了一种可用于维修保障系统建模与分析的面向方面的Petri网模型(APON),给出了该模型形式化描述,该模型引入了方面、方面库所、方面变迁、消息颜色以及对象与方面间的消息传递函数等新的概念,体现了面向方面的思想,具有很好的模块性、继承性和可维护性,能够反映维修保障系统的动态柔性特点,最后给出了一个应用实例.