一种基于UML/OCL的软件测试方法

根据UML/OCL和建模环境提供的软件模型信息,以一个武器装备管理信息系统的装备入库顺序图为例,在分析UML/OCL顺序图的语法和对象间的交互信息的基础上产生测试场景,提供了一种基于UML/OCL的面向对象的软件测试方法,并提出测试自动化的设想,对软件测试有一定的借鉴作用。     

CAI课件开发中的数据库应用

本文在分析CAI课件开发中测试部分设计难点的基础上,结合实例阐述了使用多媒体课件制作工具Authorware开发CAI课件时,如何通过ODBC数据库接口和SQL语言,以外部数据库作为数据源,实现不同章节抽取测试题的方法。     

混合指数分布模型的Bayes分析

针对截尾试验数据的情况,给出了二元混合指数分布模型的平均寿命和可靠性函数的严格的Ｂａｙｅｓ点估计,并运用最大熵准则给出了可靠性函数的近似的Ｂａｙｅｓ置信下限估计。     

飞行器MDO中灵敏度计算的自动微分方法

自动微分方法(ADM)是灵敏度计算的一种新方法,是处理飞行器多学科设计优化中灵敏度分析问题的有力工具。将ADM与估算灵敏度最常用的有限差分方法(FDM)以及与ADM同时期发展起来的另外一种灵敏度计算方法—复变量方法(CVM),从原理上进行了比较,研究了ADM前向模式在Visual C 6.0环境中的实现方法,结合多学科环境中的飞行器设计优化计算实例分析了该模式的优缺点。ADM在科学计算、工程计算等方面有很大的发展空间。     

分布式网络化测试系统设计

以某大型复杂装备远程测试系统为例,给出了基于DCOM的分布式网络化虚拟仪器测试系统的体系结构.该网络化测试系统体系结构采用DS技术作为客户端和测试端连接的中间件,并采用C/S、B/S混合模式使系统各COM/DCOM组件通过网络实现"无缝"连接.DCOM技术的应用使得各网络测试节点成为服务的本体,可以响应不同客户的测试需求,实现了良好的数据传输、安全管理和远程仪器控制.DS技术的使用进一步简化了计算机和测试应用之间的数据交换,达到了良好的实时传输效果.     

压力板仪配套及SWCC试验的若干问题探讨

采用高压氮气瓶、压力控制箱及精密电子天平等器件,对从美国土壤水分仪器公司进口的压力板仪核心部件进行了配套完善。介绍了配套后的压力板仪土-水特征曲线测试系统的结构组成与特点,对土-水特征曲线(SWCC)试验过程中应注意的问题进行了剖析。用配套的压力板仪测定了宁夏原状自重湿陷性黄土、北京原状粉质粘土和小浪底防渗斜墙重塑黄土类壤土等3种土样的土-水特征曲线,并对试验结果进行了分析。     

【专题】基于装备试验数据的信息管理平台建设研究

装备试验数据作为装备制造产业的重要生产要素,对其管理的能力已成为企业应对创新发展机遇的重要竞争力。本文对装备试验数据进行概要介绍,并对试验数据结构及特点进行分析。同时,按照装备试验数据的保密管理原则,结合装备试验活动各阶段产生的数据类型,以及试验数据量大、种类多、处理速度快等特点,提出试验数据分级管理模型。在此基础上,从试验数据在装备履约、鉴定评估以及实际应用等管理需求出发,分析当前数据管理要求规范化、多源数据管理系统化以及分析工具综合化等数据管理中需要关注的问题,提出装备试验数据信息管理平台建设框架,深入分析管理平台的基础运行环境、数据采集与预处理、分布式存储、数据分析挖掘与应用等信息管理功能模块,旨在为进一步加强装备试验数据管理提供借鉴与参考。     

Fatigue crack propagation in a helicopter component subjected to impact damage

Damage tolerant methodology is increasingly used in aeronautical components,especially due the fact that the Aviation Regulation requires such an assessment in case an accidental damage occurs.At pre-sent,there is a strong and actual interest in applying such procedures to helicopter components that are subjected to high frequency cyclic loads.In this paper,an investigation on a damaged transmission shaft for a tail rotor transmission of an actual helicopter has been carried out focusing on the fatigue crack propagation.A complete sequence of experimental tests was performed in order to create an actual ballistic damage and to subsequently check the damage tolerant behaviour.The shaft was damaged by oblique ballistic impact and was subsequently subjected to torsional fatigue loading.During the fatigue cycles several cracks propagated from the ballistic damages.Both of these steps(impact and fatigue loading)were also simulated by a complex modelling approach based on Finite Element Models and fracture mechanics theory.The comparison between the experimental and numerical results shows a good agreement but it underlines the need for a very refined modelling technique capable to replicate all the features associated with the damage in order to reliably simulate the subsequent propagation phase.     

Hypersonic impact flash characteristics of a long-rod projectile collision with a thin plate target

Impact flash occurs when objects collide at supersonic speeds and can be used for real-time damage assessment when weapons rely on kinetic energy to destroy targets.However,the mechanism of impact flash remains unclear.A series of impact flash experiments of flat-head long-rod projectiles impacting thin target plates were performed with a two-stage light gas gun.The impact flash spectra for 6061 aluminum at 1.3-3.2 km/s collision speeds were recorded with a high-speed camera,a photoelectric sensor,and a time-resolved spectrometer.The intensity of the impact flash exhibited a pulse charac-teristic with time.The intensity(I)increased with impact velocity(V0)according to I∝Vn0,where n = 4.41 for V0 ＞ 2 km/s.However,for V0 ＜ 2 km/s,n = 2.21,and the intense flash duration is an order of magnitude less than that of higher V0.When V0 ＞ 2 km/s,a continuous spectrum(thermal radiation background)was observed and increased in intensity with V0.However,for V0 ＜ 2 km/s,only atomic line spectra were detected.There was no aluminum spectral lines for V0 ＜ 2 km/s,which indicated that it had not been vaporized.The initial intense flash was emission from excited and ionized ambient gases near the impact surface,and had little relationship with shock temperature rise,indicating a new mechanism of impact flash.     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.