Damage mechanics and energy absorption capabilities of naturalfiber reinforced elastomeric based bio composite for sacrificial structural applications

The present study deals with the experimental, finite element (FE) and analytical assessment of low ballistic impact response of proposedflexible'green' composite make use of naturally available jute and rubber as the constituents of the composite with stacking sequences namely jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ). Ballistic impact tests were carried out by firing a conical projectile using a gas gun apparatus at lower range of ballistic impact regime. The ballistic impact response of the proposed flexible composites are assesses based on energy absorption and damage mechanism. Results revealed that inclusion of natural rubber aids in better energy ab-sorption and mitigating the failure of the proposed composite. Among the three different stacking se-quences of flexible composites considered, JRJRJ provides better ballistic performance compared to its counterparts. The damage study reveals that the main mechanism of failure involved in flexible com-posites is matrix tearing as opposed to matrix cracking in stiff composites indicating that the proposedflexible composites are free from catastrophic failure. Results obtained from experimental, FE and analytical approach pertaining to energy absorption and damage mechanism agree well with each other. The proposed flexible composites due to their exhibited energy absorption capabilities and damage mechanism are best suited as claddings for structural application subjected to impact with an aim of protecting the main structural component from being failed catastrophically.     

破片模拟弹侵彻钢板的有限元分析

根据破片模拟弹侵彻钢板的实验研究,采用MSC.Dytran对破片模拟弹侵彻钢板的侵彻过程、侵彻特性、钢板的破坏模式以及弹体的侵彻速度、靶板的侵彻阻力进行了有限元分析,并将分析结果与实验结果进行了比较.分析结果表明,破片模拟弹冲击钢装甲的侵彻过程可大致分为初始接触、弹体侵入、剪切冲塞和穿甲破坏4个阶段.有限元分析的破片模拟弹侵彻特性及靶板破坏模式与实验观测结果有较好的一致性,在靶板破口的正面,与弹体平面凸缘两端接触的部分,变形以剪切为主,而与切削面接触的部分,以挤压变形为主;靶板破口背面为剪切冲塞破坏;有限元模拟的弹体剩余速度与实验结果吻合较好,弹体侵彻过程中弹靶作用界面的速度和侵彻速度近似呈线性变化.有限元分析结果还表明,采用适当的模型,有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式.     

超高速碰撞形成一次碎片云特性

对超高速碰撞数值模拟方法进行了讨论.采用ANSYS/AUTODYN程序的SPH方法,对球形弹丸超高速撞击时弹丸的破碎、碎片云的形成及扩展过程进行数值模拟,其结果与实验结果进行比较,并验证了计算方法和模型参数的正确性.在此基础上采用数值模拟方法,对钨合金、轧制均质装甲及LY12铝三种材料的球形弹丸超高速撞击靶板之后形成的一次碎片云形貌及演化规律进行了研究,并基于量纲分析方法得出了碎片云特征参数(碎片云头部速度、径向最大膨胀速度及膨胀角)随初始撞击条件的变化规律。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

Investigation of normal,lateral, and oblique impact of microscale projectiles into unidirectional glass/epoxy composites

Spacesuits and spacecraft must endure high velocity impacts from micrometeoroids. This work considers the impact of 100 μm diameter projectiles into composite targets at velocities from 0.5 km/s to 2 km/s. This work begins by presenting an energy-based theoretical model relating depth of penetration (DoP) and impact force to impact velocity, characteristic time, and threshold velocity and force. Next, this work compares numerical simulations of normal impact on composites to the theoretical model. Numerical simulations are conducted with LS-DYNA and the well-known composite model, MAT-162. The numerical models consider unidirectional S2-glass fiber reinforced SC-15 epoxy composite laminates. The numerical model shows good correlation with the theoretical model. The numerical model also investigates lateral impact, parallel to the fiber direction, and oblique impact at angles from 30° to 82.5°. This work decomposes oblique impact into normal and lateral components, and compares them with normal and lateral impact results. The results show good correlation of the normal component of oblique results with the theoretical model. This numerical and theoretical study focuses on DoP, velocity, and penetration resistance force as functions of time. The theoretical model and numerical simulations are used to determine new DoP parameters: characteristic time of depth of penetration and threshold impact velocity. These models are a first step in developing the capability to predict DoP for oblique, microscale, high-speed impact on composite materials.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。     

强爆轰驱动超高速碎片发射装置设计因素分析

为了得到发射装置设计因素和超高速碎片性能间的关系,考虑了药型罩的材料、炸药种类、装药长径比、药型罩的锥角、药型罩的厚度、药型罩顶部靠近装药侧的曲率半径等设计因素,采用AUTODYNTM,结合正交试验,对超高速碎片的发射过程进行数值模拟。结果表明,3种发射装置结构分别可以提供质量为1. 533 g的紫铜碎片、速度为11. 649 km/s的铝碎片、动能为85. 6 k J的铝碎片; 2种发射装置结构均可以提供质量大于1 g、速度高于11 km/s的密实结构圆柱状碎片。验证了仿真方法的可信性,对影响碎片性能的设计因素进行了分析、排序,并得到了这些设计因素与碎片质量、速度、动能的关系。     

基于ANSYS／LS—DYNA的电子装备爆炸冲击振动损伤建模研究

针对电子装备爆炸冲击振动损伤问题,设计了损伤模拟的基本方案;采用ANSYS／LS—DYNA建立了二维“爆炸源-地面-弹性体-电子装备”模型;通过模型试验,获得了与实际爆炸冲击振动特性相吻合的加速度、位移和应力等数据。     

许地山小说中宗教救赎的流变

宗教救赎是许地山小说的创作意图和重要特质,它或隐或显地贯穿于许地山的整个小说创作中。他的小说对现实人生和终极理想进行了交错关注,而宗教救赎的意涵也在关注中不断变化。