成膜树脂对防静电涂层高温电阻率影响研究

采用石英灯加热、电阻率动态测试的方法,研究了成膜树脂对防静电涂层高温电阻率的影响.结果表明,成膜树脂对防静电涂层室温和高温表面电阻率都有明显影响.不同类型的树脂,其涂层表面电阻率升高的起始温度和电阻率峰值不同.单组分树脂起始温度低,峰值小;而双组分树脂起始温度高,峰值大.     

基于RBF神经网络和定性趋势分析的传感器故障诊断

针对传感器偏置故障及漂移故障,提出了一种基于RBF神经网络和定性趋势分析的传感器故障诊断方法.该方法充分利用控制系统闭环回路测控信息,建立RBF神经网络预测器,通过将RBF神经网络的预测输出值与传感器实际输出相比较获取残差序列,根据残差首先判断传感器是否发生故障,然后用定性趋势分析方法获得传感器偏置故障和漂移故障的辨识...     

适用于传感器网络战场监视系统的无锚点定位算法

针对传感器网络在军事领域的应用。本文提出一种适用于战场监视系统的三维无锚点自定位算法。该算法首先对布撒后的全网节点进行不基于地理信息的分簇算法,缩短了全网坐标建立的启动时间。当簇头节点能量将消耗尽时,再进行基于地理信息的分簇算法更新簇头节点。采用OFDM测距方法后,减小了节点间的测距误差。仿真实验表明,传感器网络鲁棒性较高,在区域为400m×400m×50m的三维空间内,随机放置200个节点,其平均定位误差为0.64%,满足战场传感器监视系统的要求。     

基于超动态测试系统的压力传感器标定技术研究

针对油气爆炸发展过程中压力测量的需要,提出了一种压力传感器标定的新方法。该方法基于超动态测试系统,操作简单,精度可靠,并采用最小二乘法对各测试点进行了拟合,得到了压力传感器的标定系数和其它基本性能指标,保证了测试过程中压力的准确性和精度。可在其它类似的测试系统中应用。     

聚碳硅烷纤维化学气相交联研究

以环己烯作为反应气氛,对聚碳硅烷(PCS)纤维进行了化学气相交联不熔化处理。与空气不熔化进行对比,研究了不熔化过程中PCS纤维的反应程度及凝胶含量的变化,并进行了元素分析和热重差热分析,初步探讨了PCS纤维环己烯化学气相交联反应的机理。结果表明,在环己烯气氛中,PCS分子结构中Si-H键的反应程度随不熔化温度的提高逐渐增加,相应地,PCS纤维的凝胶含量迅速提高直至不熔。环己烯受热后产生自由基,引发PCS分子中的Si-H和Si-CH3键断裂形成自由基,促进PCS分子间形成Si-CH2-Si结构而实现交联。     

Response of masonry systems against blast loading

In this paper eight successive experimental blast tests with an increasing TNT equivalent charge weights ranging from 0.56 kg to 17.78 kg were conducted on unreinforced, ferrocemented overlay masonry and confined masonry walls. The pressure-time history caused by the blast was recorded by pressure sensors installed on the test specimen. The resulting damage pattern was observed during each test. Weak zones in the three systems of masonry were identified. Scaled distances for different damage levels in the three masonry systems were experimentally obtained. The results provide a basis for determining the response of each masonry system against blast loading. Consequently, efficiency of ferrocemented overlay ma-sonry and confined masonry was found established in mitigation against blast loads.     

A new energy efficient management approach for wireless sensor networks in target tracking

This paper mainly studied the problem of energy conserving in wireless sensor networks for target tracking in defensing combats. Firstly, the structures of wireless sensor nodes and networks were illustrated; Secondly, the analysis of existing energy consuming in the sensing layer and its calculation method were provided to build the energy conserving objective function; What's more, the other two indicators in target tracking, including target detection probability and tracking accuracy, were combined to be regarded as the constraints of the energy conserving objective function. Fourthly, the three energy conserving approaches, containing optimizing the management scheme, prolonging the time interval between two adjacent observations, and transmitting the observations selectively, were introduced; In addition, the improved lion algorithm combined with the Logistic chaos sequence was proposed to obtain sensor management schemes. Finally, simulations had been made to prove the effectiveness of the proposed methods and algorithm.     

焊条粘结剂及烘焙温度对药皮吸潮性的影响

通过试验研究了改进水玻璃及焊条烘焙温度对焊条药皮吸潮行为的影响.结果表明,在水玻璃中加入防水剂和/或丙烯酸甲酯,以及水玻璃低碱化处理均能明显提高焊条药皮的耐吸潮性;对于不同类型的水玻璃,通过选择适当的烘焙温度可有效地防止药皮吸潮.     

强激光照射下双层壳体温度场的数值模拟

运用有限元法对强激光照射下双层壳体的温度场进行了数值模拟。详细分析了在激光功率一定的情况下,外层壳体的热传导系数、比热和厚度的变化对内层壳体温升的影响。计算中考虑了内层壳体的热损耗效应。此外,根据材料参数的温度相关性,分析了内层壳体材料参数随温度的变化特性对其温升效应的影响,并将计算结果与强激光照射下单层壳体的温度场进行了比较,得到一些有意义的结论。     

两段探测目标的传感器任务调度问题0-1规划模型及算法

为解决指挥系统控制中的调度困难,研究了一类特殊的传感器资源调度问。主要分析了跟踪目标的探测次数、时间间隔和传感器资源等约束条件。用跟踪目标的重要程度之和作为目标函数,建立了一个0-1规划的数学模型,再利用变换将其转化为0-1线性整数规划模型。利用割平面法求解得出最优调度策略,其能在工作量饱和的情况下合理调度传感器资源。为提高求解速度,提出了对应的模拟退火算法。通过对一些不同规模实例的求解,在资源利用率和算法的求解速度等指标上,与割平面法及遗传算法进行对比分析,验证了模型的有效性和模拟退火算法求解的高效性。