飞行器分离速度测试系统

介绍一种新型的分离体速度测试系统。用反射条纹光电技术将位移量变换为电信号，高速实时写计算机内存采集数据，测试结果现场打印，该系统具有测试精度高，操作方便，应用面广等特点。     

基于调制/解调的动态响应测试方法

在磁悬浮列车中,悬浮控制系统要求间隙传感器的动态特性,但无法用机械方法测试较高频率时的动态特性。根据传感器工作机制,用模拟涡流场来代替被测导体的涡流效应,提出基于调制/解调原理的动态特性测试方法,并分别对正弦信号和方波信号的测试方法进行了探讨。最后给出了两种特征信号的传感器动态特性测试结果。实验表明,这种方法能够满足测试要求,相对于机械方法有很大的优越性。     

临沂7·29大火对消防工作的启示

在总结山东省临沂市7·29灯具城大火的基础上,分析了造成大火的主客观因素,提出了扑救此类火灾的战法及注意的问题。     

光纤光栅压力传感器封装增敏技术

介绍了封装对光纤光栅纤内谐振腔的光学特性的影响、基于压力增敏的光纤光栅封装的物理机制及其研究进展,综述了解决应变和温度交叉敏感问题的方法,提出了一种基于压力传感增敏效果好的多层封装结构,同时还利用2种聚合物不同的力学特性,设计了一种解决应变和温度交叉敏感的封装方法,讨论了封装材料对增敏效果的影响.     

A robust sensor covering and communication problem

We consider the problem of placing sensors across some area of interest. The sensors must be placed so that they cover a fixed set of targets in the region, and should be deployed in a manner that allows sensors to communicate with one another. In particular, there exists a measure of communication effectiveness for each sensor pair, which is determined by a concave function of distance between the sensors. Complicating the sensor location problem are uncertainties related to sensor placement, for example, as caused by drifting due to air or water currents to which the sensors may be subjected. Our problem thus seeks to maximize a metric regarding intrasensor communication effectiveness, subject to the condition that all targets must be covered by some sensor, where sensor drift occurs according to a robust (worst‐case) mechanism. We formulate an approximation approach and develop a cutting‐plane algorithm to solve this problem, comparing the effectiveness of two different classes of inequalities. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 582–594, 2015     

传导冷却高温超导磁体热输运参数反演识别

在传导冷却高温超导磁体系统中,超导磁饼热导率以及磁饼与导冷体之间的界面热阻是影响热输运的主要因素,也是传导冷却超导磁体系统热设计的难点。为了获得准确的热导率和界面热阻参数,根据Levenberg-Marquardt算法提出通过表面测温确定传导冷却超导磁体热输运参数的反演识别方法。搭建低温实验数据测试平台,建立高温超导磁饼三维各向异性热传导模型。利用反演算法对传导冷却Bi2223高温超导磁体在40~76K温区的各向异性热导率与界面热阻进行反演识别,并分析测温误差对识别结果的影响。研究成果将为超导磁体热输运参数的获取提供一种新思路。     

基于VCSEL实时点到点OFDM光信号在MMFs中的传输

通过实验,在使用未冷却直调3.63 GHz垂直腔面发射激光器的简单强度调制和直接检测系统中,首次证明在800 m OM2多模光纤上采用正交频分复用技术进行64 QAM(正交幅度调制)编码实现实时点到点通信,传输速度为11.25 Gb/s,功率损失1 d B。     

光纤在遥控武器站火控系统中的应用

通过对光纤及光纤通讯关键技术和设备的介绍,提出在遥控武器站火控系统中利用光纤传输方式实现系统高速、高带宽视频、总线、IO信号的传输方式。通过光电转换单元的模块化设计,与系统部件有效集成,减少部件数量,优化系统网络。基于CPLD技术的电路设计,有效减小电路板尺寸,缩短设计周期,提高工作可靠性。设计紧凑、合理的光纤旋转连接器及光纤链路形式,有效保证链路的插入损耗,高质量完成信息传输。运用时分复用/解复用技术拓展传输带宽,为系统的升级和扩展预留了充分的空间。结合工程实际提出光纤通讯目前存在的主要问题并给出相应的解决方案。     

Explosion temperature mapping of emulsion explosives containing TiH2 powders with the two-color pyrometer technique

In the study, the two-color pyrometer technique was used to measure the transient temperature field of emulsion explosives with different contents of TiH₂ powders. The experimental results showed that the introduction of TiH₂ powders could significantly increase the explosion temperature and fireball duration of emulsion explosive. When emulsion explosives were ignited, the average explosion temperature of pure emulsion explosive continuously decreased while emulsion explosives added with TiH₂ powders increased at first and then decreased. When the content of TiH₂ powders was 6 mass%, the explosion average temperature reached its maximum value of 3095 K, increasing by 43.7% as compared with that of pure emulsion explosive. In addition, the results of air blast experiment and explosion heat test showed that the variation trends of shock wave parameters, explosion heat and theoretical explosion temperature of emulsion explosives with different contents of TiH₂ powders were basically consistent with that of explosion temperature measured by the two-color pyrometer technique. In conclusion, the two-color pyrometer technique would be conducive to the formula design of emulsion explosive by understanding the explosion temperature characteristics.     

不同裂解温度对制备SiCf/Si-O-C复合材料性能研究

以聚硅氧烷为先驱体,研究先驱体转化过程中在不同的裂解温度下对制备SiCf/Si-O-C复合材料性能影响.结果表明,当裂解温度在700℃、800℃时,陶瓷基复合材料的弯曲强度分别为255.2 MPa、309.0 MPa;当裂解温度在1000℃时,陶瓷基复合材料的弯曲强度为45.3 MPa.对SiCf/Si-O-C复合材料的微观结构及载荷-位移曲线进行分析,发现界面结构是影响SiCf/Si-O-C复合材料性能的主要因素.